similar to: Voicemail notification email with no attachment despite attach=yes

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

hi do u have the sip phones extensions in the extension.conf and are they in the right context (sip-incoming)??? are the sip phone registering to asterisk?? try stop asterisk and reconnect as asterisk -vvvvvvvc to check see them registering... ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Sistemista WebSolvingJaa Sent: Fri 7/1/2005 6:43 PM

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

Hi All, I'm having trouble setting up a queue: I'm using AgentCallBackLogin to login in the queue, but: 1 - When an agent answer the call and another call arrive his phone rings again. 2 - When no there are no one answer the queue the system goes to voicemail of agent 1234 I'm using asterisk-1.2.0-beta1. My configuration is below, Any ideas? Many thanks, Joao Antunes

I have a setup of 3 Cisco 7940 running Sip image 6.3. All these phone are registered by the below information *CLI> sip show peers Name/username Host Mask Port Status 2002/2002 192.168.22.199 (D) 255.255.255.255 5060 Unmonitored 2001/2001 192.168.22.200 (D) 255.255.255.255 5060 Unmonitored 2000/2000 192.168.22.198 (D)

Dear friends, please excuse me if my question will be trivial. I've installed and started Asterisk (stable 1.0.7, but with CVS HEAD I experienced just the same problem), and changed a bit sip.conf: [general] ; ... dtmfmode = inband disallow = all allow = ulaw allow = alaw allow = gsm run kphone, and call the 1235 extension. According to sample extensions.conf, Asterisk would

Hi: when add a new voicemailbox, asterisk will create a new directory to it. since linux has limitation for the number of subdirectory. i wonder how many voicemailbox can asterisk support? thanks. yan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030430/bd36cdaa/attachment.htm

Does Asterisk know when it hits a voicemailbox ? When calling to a cell-phone or GSM, after some rings and no pickup you arrive at a voicemailbox. If Asterisk does not know it's a voicemailbox that has answered the call, the voicemailbox will contain 60minutes of 'silence'. This is very expensive 'silence'. How to avoid this ? Jonas -------------- next part --------------

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

Hello, Suppose a dialplan such as: exten => 6004,1,Answer exten => 6004,n,Wait(1) exten => 6004,n,SayDigits(1) exten => 6004,n,Festival(This is a test of Festival) exten => 6004,n,Hangup When watching in the CLI, I see this: == Using SIP RTP CoS mark 5 -- Executing [6004 at internal:1] Answer("SIP/505-00000004", "") in new stack -- Executing [6004 at

I just completed building a feature rich asterisk voicemail system using perl, php, and mysql. My only concern is that the system i built will not be able to handle the call volume needed. Let me start by explaining my setup. Incoming call -> route.agi (perl -> mysql lookup) -> AGI -> voicemailbox (using mysql odbc) or terminate with wrong number message if a message is left in a

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

I've been using * at home for a while now and I'm quite happy with how it works. Having voicemail emailed to me and notify my cell phone via SMS is a great way to impress my friends. :-) The inbound context for my X101P looks something like this: exten => s,1,Dial(SIP/analog1&SIP/analog2,20) exten => s,2,Answer exten => s,3,Voicemail(u1234) exten => s,4,Hangup The

Hi, I have been trying to workout how to use the call pickup. So Far, I have the following in zapata.conf [channels] signalling => fxo_ks context => local pickupgroup=1 callgroup=1 channel => 1-3 When I dial *8# all I hear is busy tone. What have I missed? thanks Jay.

hi, exten =>6000,1,dial(SIP/6000,15,tr) exten =>6002,1,dial(SIP/6002,15,tr) exten =>6004,1,dial(SIP/6004,15,tr) exten =>6006,1,dial(SIP/6006,15,tr) exten =>6008,1,chanspy(SIP/6006 | wbq) when i dial 6008 ,it is connected ,but i can't able to hear the voice of the any one. when coversation between the 6002 to 6006. in my Console mode i got the following comment *CLI>

I've google for hours trying to find a discussion of a similar problem as the one I'm having, so forgive me if this has come up before. If it has, please point me in the right direction! The problem occurs when a caller (A) is transferred by an intermediary party (B) to voicemail (Voicemail or VoicemailMain), either directly or by being taken to voicemail when the callee (C) doesn't

I've just installed an X100P, built the kernel module, and tried to use it to make an outgoing call (via a phone connected to an ATA-186). However, I just get a reorder tone and see this on the console: -- Executing Dial("SIP/ata1-4409", "Zap/1/5551212") in new stack NOTICE[1200825920]: File app_dial.c, Line 481 (dial_exec): Unable to create channel of type

I'm wondering if there is a simply way to perform a voicemail callback feature using AGI. For instance, a caller leaves a voicemail, the voicemail will then call the owner of the voicemailbox determined by a database look up. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, When somebody leaves a message in the voicemailbox, is there a way to know the file name of it? I need to return the voicemail file name in the deadagi command. Thanks, Anahi _________________________________________________________________ Convierte las fotos que m?s te gustan en tu nuevo fondo de escritorio para el ordenador. Es f?cil y adem?s gratis

Hey all, I'm pretty new to Asterisk and VoIP in general, so I'm hoping I can get a bit of help here. First I'll explain my setup, and then my problem. Right now I have a Cisco 3640 with a VIC2FXO card in it which has 2 FXO ports. I have an analog phone line plugged into the first port (voice-port 1/0/0). I've got it setup so that calls coming into that analog line are