Displaying 20 results from an estimated 40000 matches similar to: "* Picks up line during outgoing call"
2007 Jul 25
1
Dialtone when automatically picking up.
I'm in the process of setting up a 'phone tree', and are running into
some problems. My goal is for users to dial a phone number, the
asterisk system picks it up, plays the greeting, and users can type
whatever they want into the system.
What actually happens is users dial the phone number, asterisk picks up
and additionally goes off-hook on another line, plays the greeting and
2006 Jun 06
5
HELP!!!! Weird TDM2406E unable to bridge all outgoing calls.
Hi all,
I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in
my office. the out going calls symptom like when called party pickup the
phone but the calling party still hearing the ring tone from the IP phone.
Please light me up. it been many sleepless night by googling around
trying to get the right answers.
The digium card running on Intel 915G chipset. Below are my zaptel
2004 Dec 30
1
Weird..bridging to Zap channel FXS instead of bridging to PSTN FXO on outgoing group
Hi All,
Channels 25-28 on a customers PBX are regular Zaptel FXO cards that
are hooked into 4 incomming phone lines. They are all in a group to do
automatic rollover for outgoing calls (if channel 25 is being used,
dial on channel 26, etc.).
Sometimes when a user is dialing a number, instead of bridging to one
of the FXO cards it goes and rings to Zap/1-1.
This doesnt occur all the time but some
2008 Jul 14
4
Zaptel problem with pots lines
Hi,
I'm trying to get up and running a TDM400 with a standard italian pots
line but i'm having
problems at getting asterisk to detect when the line get answered on
outgoing calls.
I'm using asterisk 1.6 beta 9 with zaptel 1.4.11.
I tried with and without answeronpolarityswitch=yes but it didn't change
anything at all.
With callprogress=yes answer get never detected.
With
2005 Sep 13
1
asterisk hangup detection on a pbx analog port]
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
<meta content="text/html;charset=ISO-8859-1"
2005 Sep 06
1
Threeway calling uses up two FXO lines
I'm running Asterisk (stable branch downloaded 2-Sep-05) on RedHat 9 and I
have a TDM22B installed (TDM400 w/ 2 FXO and 2 FXS ports).
Everything seems to work except threeway calling. I can establish a threeway
call, but it uses up BOTH FXO lines. Note that I DO have threeway calling
active with my Bell service. Here's a typical scenario:
1) Call 765-1574,
2) When they answer, press
2004 May 13
1
TDM11B - 2nd channel is not detected
Hello all,
This is my first post to this mailing list. I've been following the
development (not as a developer, but as an interested user) of Asterisk
for over a year now. It's only in the last month that we've decided to
give it a try (hey, might as well...everything else we use is open
source).
We ordered a TDM11B (1 FXS, and 1 FXO). The card and Asterisk install
was uneventful.
2006 Dec 13
0
Annoying echo echo problem problem ...
On Wed, 13 Dec 2006, Wireless wrote:
> Hi Gordon
>
> I too have this problem with one of my two BT lines, very very annoying. I
> was using a TDM400P and am now using a Sangoma A200 (lightning got the TDM),
> I think the sangoma is very slightly better (less echo) but I might just be
> kidding myself. Another think I've found it that using a faster CPU (now on
> a 450
2005 Jun 22
1
Zap POTS Line Problem calling outbound
I have one POTS line going into a TDM400P. Here in Atlanta, we have 10
digit local dialing. I launch a call "Zap/1/7705551212" and it goes
thru just fine. The next time I try it, without any modifications, I
get a Bell recording telling me that I must dial the area code and seven
digit number when placing a local call. It's like Asterisk may be
starting the dial before the line
2007 May 15
4
Outside lines are just not happening...
Two problems, possibly related:
Here's the configuration...my Asterisk box has a TDM844B in it; port 1-4
are FXS, 5-8 FXOs.
Here are the config files:
/etc/zaptel.conf:
--------
fxoks=1
fxoks=2
fxoks=3
fxoks=4
fxsks=5
fxsks=6
fxsks=7
fxsks=8
loadzone = us
defaultzone = us
--------
/etc/asterisk/zapata.conf:
--------
[channels]
language=en
usecallerid=yes
hidecallerid=no
2005 Aug 25
0
Internal FXS to SIP problem
I've just setup a new asterisk box (cvs HEAD) with a digium tdm411 and
a couple computers with eyebeam. I have one small. I cannot call the
eyebeam clients from the phone connected the fxs port. I can call the
phone from the eyebeem clients. And, I get both the fxs phone and
eyebeam clients to ring when a call comes in through the fxo port.
I have been trying to get this straightened out
2005 Mar 26
0
Echo on Zaptel hardware (Wildcard 100XP)
I've enclosed by config... I've tried everything from lowering the
tx/rx gains.. to toying with 32/64/128 echo canceling taps... at 256
echoing is really bad...
I've even tried recompiling the zaptel driver with the MARK2 super
echo canceling support...
I still have a very slight echo that I simply can not get rid of....
this echo is ONLY when going VoIP to POTS.. and I understand
2006 Mar 05
0
ZapATA channels up, but calls cannot be made
I have a issue with two Zap clone cards where they used to work.
I am using Asterisk@Home 2.5 which includes Asterisk 1.24 and Zaptel
drivers 1.2.4. The system is a new Intel Celerion machine. I used to
have the same cards running in a Intel PIII system. in this system,
they worked. In this older system, I was able to call into the
machine and call out from it. Now that I have upgraded
2007 Jun 04
2
FX Dialing Odd
Here's a possible bug, or more likely, I'm just missing something.
We have a pots card in one of our asterisk boxes. Its a simple asterisk
setup with one FXO/FXS card and basic static extensions file, etc. When
we dial out over the pots line, 4 out of 5 times, it will work. However,
every 4 or 5 times, we get an error back from the provider that says
"The number you have dialed.....
2011 Apr 02
1
Problem getting TDM400P clone card to go off-hook and dial
I am having problems getting a Nicherons TDM400P wildcard clone to dial out.
Everything appears to be configured correctly, but although I see call
progress, it never seems to actually pick up the phone.
(The following is a test of 911 emergency, where I substitute 811 [repair
service] as the actual number dialed.)
*CLI>
-- Executing [911 at from-internal:1]
2004 Aug 11
1
CallerID Debug On Zap/POTS Channel
Hi all,
I've been trying to wrap my mind around this one for several days now.
How can I 'debug' the CallerID reception on a Zap/POTS channel? I have
a POTS line with CallerID and a Digium TDM11B card right now. I have my
signalling set to ks for both sides, can make and receive calls just
fine. But I never get CallerID on incoming calls. I get the following
messages:
Aug 11
2004 Jun 18
2
Fax with SPA-2000's?
I've been trying to get fax reception to work using an SPA-2000 to ring
the fax machine or modem that's taking fax calls. I was curious if
anyone else had tried something similar, and if so, had any luck
getting it to work reliably. I've been able to get it to work, but it
isn't reliable. (Pages/lines of black dots result more frequently than
not.) The incoming lines are FXO
2004 May 04
1
Pots Extensions
Hi all,
I am either going daft or not reading things right.
I have just installed, (well 10 hours ago) a TDM40B and 3 X100P cards. I
have followed the examples for the conf files to the letter.
I can call the pots extensions OK from IAX clients, SIP clients and from the
incoming X100P cards.
But, if I pick up the handset to make a call all I get is the engaged tone
and the following message.
2006 May 27
3
TDM
The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk
1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do
the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point
that the cable plugs into the card.
Here is my /etc/zaptel.conf
loadzone=us
fxsks=1
and here is my /etc/Zapata.conf
[channels]
language=en
#include
2005 May 19
0
tdm400p fxo not working
Dear all.
I have a tdm400p with an FXO module in slot 4 and an FXS module in slot 1.
I have not configured the FXS port in an attempt to keep things simple.
The problem is that when I call the POTS number (assigned by phone company) asterisk is seeing the call but then not doing anything with it.
The verbose output from asterisk is as follows: