similar to: extension.conf and SIP phones.

I have a cisco 7940 with the following sip.conf config: [Desk1.1] type=friend secret=****** defaultip=192.168.1.14 insecure=no mailbox=102 callerid="Desk1.1" qualify=500 canreinvite=no context=extensions host=dynamic group=2 I do not get message waiting indicator (mwi) on this phone. Is the another .conf file invilved in configuring this function other than the mailbox=xxx in the

Hi, I have just upgraded my Cisco 7960 phone to SIP firmware today and I have to say it's working great with Asterisk. At work (which uses Cisco Call Manager), when a voicemail is recieved the read light remains lit until the voicemail is retrieved. Is there any way to achieve the same effect with Asterisk ? Thanks, Paul. -------------- next part -------------- An HTML attachment was

I have several (various brand) sip devices with static IP's. I understand that asterisk will not accept a registration from these devices if the host= parameter is not set to 'dynamic' in sip.conf. I want calls to these extensions to be routable even before the device registers. I understand that is what defaultip= is supposed to do, but it doesn't work. I get a busy tone when

I did some searching in the archive, but found only one message with this same question and no answer. Hopefully it's a simple config problem. When the Caller-ID is delivered, it is surrounded by double-quotes, like this: "ATA-57 1" On long caller-id strings, the last character is cut off to make room for the leading double-quote: "BudgeTone 1234 instead of BudgeTone

Do you know whether it has been fixed on the 8.0.1 release? Scott On Fri, Nov 8, 2019 at 9:45 AM Krzysztof Parzyszek <kparzysz at quicinc.com<mailto:kparzysz at quicinc.com>> wrote: The one blocking issue that existed in the past has been fixed. I haven’t had time to do any work on it lately, but I’m not aware of any fundamental problems that would make it not work on x86. --

Hi Jay/Samba peeps, Emailing in reference to http://lists.samba.org/archive/samba/2011-April/162277.html I have seen a very similar issue with a similar setup. Users fail to be verified with: getent passwd username Entry in the log at same time is: [2012/01/23 16:58:53.159761, 3] winbindd/winbindd_misc.c:352(winbindd_interface_version) [18510]: request interface version [2012/01/23

Hello, everybody. I have encountered some strange situations that are driving me crazy. I have 2 DCs which using sernet samba, version 4.7.6. and I use a samba version 4.6.2 as a domain member for file sharing in CentOS7.4. The domain member works well as a file server, but When I login to that domain member using AD authtication. Sometimes, It works OK too, but sometime , I can't login that

I have a few Cisco 7905G phones and I having a little trouble configuring them. They are working with Asterisk. I'm able to get the sip image loaded, but I can't get the phones to blind transfer. Does the Cisco 7905G Phone use XML Services? If you are using the 7905G phone, would you post any of your configuration files so I can try and figure out where I'm going wrong? Thanks for

Hi Scott, That #1073741833 is a register mask. They are treated as aggregate registers (essentially sets of registers), so if it includes R9D and R11D, it will be treated as being aliased with both. These separate defs are there because they reach disjoint registers. -- Krzysztof Parzyszek kparzysz at quicinc.com<mailto:kparzysz at quicinc.com> AI tools development From: Scott

incominglimit is already implemented for SIP. Just specify under the endpoint how many incoming connections are allowed. For example, [cisco] type=friend username=cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away

I suspect this has more to do with Ruby than Puppet, but I know little about Ruby and Google has failed me, so I''m asking here. I''m finally getting some of our older systems brought into Puppet. I installed it on several this morning without incident, but there are two (more or less identical RHEL 5.3 systems) that throw horrible errors. These systems did not have Puppet or Ruby

Hi Scott, Sorry for the late reply, I was out of office during the holidays. 1. A def node can reach either a use node, or another def node. In the highlighted phi node (p3224), the def (d3225) reaches another def (1598) in statement (s1597), that’s why it’s needed. 2. The reason why the def of R11 in s1578 is not connected directly to the use in s1725 is that there may be an intervening

When I set: wins support = yes time server = yes my wins service stops working and no computers show up in the network neighborhood..as soon as I change time server = no, they start to re-populate. I have looked around and havent found a definitive answer (apologies if I overlooked it)... but if someone could tell me if this is a documented issue, or just me that woudl be great Thanks

Hi. I''ve been trying to develop a module for managing Cobbler from puppet. So, I need a custom type - cobblerdistro, which will fetch ISO from http, unpack it at desired destination and register distro with Cobbler. I have one issue with ensure => absent situation. First of all, here is my type: <code> # cat type/cobblerdistro.rb Puppet::Type.newtype(:cobblerdistro) do @doc

Hi, I just tried to boot my token ring devices with 2.05 - to no avail, it hangs after loading the kernel. I then tried older versions, and found 2.03 booting like a charm, and every 2.04-pre including 2.04 hanging. Here's the config of the devices: - Networkstation 2800 with IBM PCI Token Ring card 2 - IBM Thinkpad T21 with IBM PCI Token Ring card 2 Maybe this has to do with the changes

Hi, I'm having an issue trying to make a Windows machine sambaserveroin a Samba domain. Samba is running with LDAP backend (OpenLDAP). When I try to join the domain, Windows says that the machine account does not exist. The machine account, however, is successfully created in the LDAP directory after the join fails. When I try to join again, Windows says that the account already exists.

On Fri, 2013-10-11 at 16:00 +1300, Andrew Bartlett wrote: > On Fri, 2013-09-13 at 09:10 +0200, christophe wrote: > > Hi, > > > > First guys, I'd like congratulate you. Samba 4 is really a cool product. > > > > I have a little problem though. > > > > The context: > > > > I have Samba4 AD DC working perfectly on a virtual machine >

Dear I'm facing issues when using Samba on PDC mode + LDAP installed on i386 Debian 6 Is there a way to resolve it ? Jun 14 11:02:31 fileserver32 smbd[1115]: [2012/06/14 11:02:31.644224, 0] lib/fault.c:47(fault_report) Jun 14 11:02:31 fileserver32 smbd[1115]: =============================================================== Jun 14 11:02:31 fileserver32 smbd[1115]: [2012/06/14

Hi everybody Could someone give a tip on how can I configure asterisk to use 2 ATA's 186 to communicate each other using SIP with asterisk. I know this most be a very simple task, however this is the very first aproach I have to asterisk. I set the following config but I don't get dial-tone when I off-hook the phone from any of the two ATAs. Can some one tell what I'm missing in

It works for me. I don't know why it wouldn't work for you. Looking at the autoindexing code I don't see how it could be possible that it works for saving but not copying. > On 10 Sep 2015, at 21:05, Larry Rosenman <larryrtx at gmail.com> wrote: > > Is there a fix coming for this, Timo? Or is it a longer term issue? > > On Mon, Sep 7, 2015 at 5:23 PM, Larry