similar to: X-Lite Build 1059 problems

Is it possible that cheap phones (Budgetone) cause echo's? I had a digium X100p and i managed to get rid of all the echo problems i was having. Recently i got a Voicetronix Openswitch12, and getting terrible noises when i use an IP phone (budgetone) to call analog phones or PSTN. I have tried all the possible things (rxgain, txgain, echocancel, i even changed the codec to g711) Is it

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Hi there, Do anyone have any experience with SIP phone that support a headset ? We have Budgetone phones but we need headsets. What would you advise ? Thanks Thibault

I've got my asterisk server in the DMZ of my local LAN - I've used my Budgetone and GXP2000's from the Internet- on direct IP connections with no problems. However, I'm about to deploy about 5 phones (either budgetone or GXP2000's) all on a LAN behind a NAT- on a different network than the Asterisk server. Should I look into using STUN servers? Will this setup be a

Everytime that I make a call to a Budgetone 101 phone. I always see the following: -- Executing Dial("SIP/1001-bac5", "SIP/1000|20|tT") in new stack -- Called 1000 -- Got SIP response 302 "Moved Temporarily" back from 172.22.5.4 -- SIP/1000-465e is busy I can use X-Lite all the time to make a call without a problem, but any of the budgetone 101 phones

I have the MusicOnHold feature working great when called from ATA-186 extensions. It's pretty cool. However, when I call from a BudgeTone-100 phone, no music is heard -- instead it continues the ringing feedback and acts like the call is unanswered. At the same time, I can call from (multiple) ATA-186 extensions and hear music as long as I like. How can I debug this? As far as I can tell,

Hi, Anyone succeed using call transfer function in X-Lite? It is stated that this feature is available in the Lite version too, but for me it doesn't work. Clicking on Transfer button, then entering the number and then clicking again on transfer doesn't work. I miss something? Thanks, Dan

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

I'm using 1 BudgeTone 100 IP Phone and a Sipura 2000 for all my old analog phones. The analog phones with the Sipura seem to work great. Voice quality is fine on both ends on the Sipura. I'm using the Teliax service and I use the Ulaw codec for all phones. However, I'm struggling with the BudgeTone 100. On my end, I find there is lot's of voice cut outs. I'm told my

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on

Hello all, We've been using our Asterisk system live for about a month now and I'm looking to tuning a few things. First, is echo, I receive a fair amount of echo during the first 10-15 seconds of incoming calls. Next is a very weird problem. We have serveral Polycom IP300's and one Budgetone phone. It seems that if we unplug & move the Budgetone (which happens a fair amount

Hello, I would like to buy a SIP IP phone, but I don't know wich one to choose... Can you tell me wich IP Phone is known to work with Asterisk please. I've seen the Cisco 7940, but I don't know if it works, and how expensive is it ? I'm french, so if you know some french resellers, tell me. Thanks a lot, ---------------------- Fabrice Tereszkiewicz Sawadka.org

I have a couple of Budgetones that I am playing with trying to get them to work with * from a remote network over the Internet (yes NAT joy!). My * server is in my DMZ and I have 5060 and my RTP range forwarded (UDP) to my public address (through a Cisco PIX). Internally, I can setup my budgetone, it registers and works great. I then have a Linksys router connected to another Internet

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040709/2e9bd3f6/attachment.htm -------------- next part -------------- ? Hi there, This is shan. I need help regarding the grandstream Budgetone - 100 phone which i configured. My problem is: I can able to do call ---> Softphone(PC) ---> * ---> Grandstream Budgetone-100 but

I'm looking to purchase and deploy a bunch of hardphones for agent use. The phones will have to register with Asterisk and/or SER, depending on where the phones go. They need only one line, G729 codec, and no super fancy features. Preferrably something that is easy to provision. I would think the BudgeTone would be good, but then I've read so many people complaining about them, and some

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

Look like SNOM have rolled back the firmware version of the 200's from 1.16w to 1.16q.. Anyone know why? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are