similar to: Vonage locked ATA-186 question

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

In the process of investigating a Cisco ATA 186 that was locked by Vonage, I found that you can still unlock the device yourself. But there's a catch. The device's design has a great plus: a DIP32 *socketed* SST28SF040A flash chip. I found an 8 digit unlock code at 0x03FA71-0x03FA78. I do not know if that is a standard location. If you have the equipment, you're in luck. But

I've been reading all I can in order to try to implement an asterisk setup. In speaking with someone the other day, they advised they thought there was a way to make a SIP or softphone (gnophone) go straight out to the vonage network through asterisk. I already have vonage set up with an ATA 186. What I'm wondering is is there some way that I could direct dial from a softphone

I see that there's now a 2.16.1 upgrade path for Cisco ATA-186 devices, dated (variously) July 11 or July 14 2003. Here are some interesting bugs that claim to be fixed. Most notable is CSCeb17953, at least from my perspective, as I've hit this bug before. CSCea42480 The Cisco ATA ignores the Require:100rel header and processes call. CSCea69889 The Cisco ATA builds a 302 Moved

For those of you wanting to salvage your Cisco ATA-186 after inadvertent locking, or after recovering your devices from a vendor who has locked them, here is a rainy-day project for you: http://www.sst.com/downloads/datasheet/S71077.pdf The above document gives exact specifications on the 4mb flash EEPROM that stores all program and configuration data on the ATA-186 (aka Komodo.) If you

TelIAX, one of the new VoIP-to-PSTN gateway providers, has their terms of service posted on their signup page: http://teliax.com/user_admin/signup/s1.php They look strangely familiar--it's exactly the same as http://www.vonage.com/features_terms_service.php with s/Vonage/Teliax/. (And it's cut off about halfway through). Anyone else notice this? Brad

Will Vonage unlock your ATA for you for the $15? Or someone else? I have an ATA from them I would like to use with asterisk as well. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Thursday, April 29, 2004 8:16 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Vonage and * (and what

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

Hello - I'm using ATA-186 devices, with RFC2833 DTMF encoding. I am having problems with routines that input long strings of numbers, in that I am getting more than a small number of double digit entries. As an example, I have a section that asks for the user to enter a call forwarding number, and then puts that number into a database. Almost always, there are double digits when the

-----BEGIN PGP SIGNED MESSAGE----- Greetings, I've just about got Asterisk up and running and am wondering the following. Currently, I subscribe to both Vonage and Broadvoice and as such, I've got a Sipura and Cisco ATA186. Although I'm sure this is expressly prohibited somewhere in my service agreements, can I reprogram these devices to access my own asterisk server rather than

I have a small pile of them from customers who were too lazy to send them back after switching to our local voice service... Is there any hope of ever using these things with Asterisk? Vonage does not want them back and they won't unlock them either. A terrible shame! Should I just toss them? Steve

I just installed Asterisk on my server and I have Vonage softphone. I need my Asterisk server to receive calls through the Vonage Softphone DID and make outgoing calls through the Vonage ATA using an X100p to connect to it. Can someone help me out on configuring this? I really need this for my business and would greatly appreciate the help.

Hi, Can U tell me the Vonage ATA 186 settings? I would like to try to have a web interface on my adapter :-)) Best regards, Chris Hariga

Is anyone using Vonage on an FXO port in Asterisk? How well does it work? Specifically, any echo/delay problems? Second part, I am assuming it is possible to separate fxo ports for least cost routing correct? In other words, I would like the routing to be such that any local or 1-800# dials fxo ports 1-4 which is a normal 4 line analog PSTN connection. Any long distance call will try to dial

Sprint Nextel is sueing vonage, voiceglo and theglobe.com for infringing on VoIP patents. Sprint Nextel claims to have about 100 patents on VoIP technologies. Does anyone know which ones this article is talking about, and if so does asterisk have any of those features? The reason I am asking is that the article is vague, Vonage uses a fairly standard codec set, I dont know about the others.

Does anyone have a working connection to Vonage via asterisk? (SIP, not ATA) I just signed up to test their service and they sent me a Number, Proxy, port and password. Every reference I have tried leaves me with a 404 error coming from Vonage. If you have a working setup, please post some config references. ? Thank You, Steven BerkHolz Soon to be known as HIROTEC AMERICA

Hi, I'm trying to get Asterisk to connect to Vonage (softphone acct) to allow me to place and receive calls. I have successfully configured Asterisk to route inbound calls and send them to the correct extension, but I can't get outbound calls to work. I have Asterisk successfully registering with Vonage, but when an INVITE is sent out, I get a "404 Not Found" back from Vonage

The Vonage service is offered with a SIP Cisco ATA device for connection to an analog phone. Is it possible to connect the Vonage service directly to the Asterisk PBX bypassing the ATA and FXO card? Are there other services that offer this capability or something similar to IP dialtone? Thanks Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL:

I just got setup with vonage.ca with the motorola ata unit.. I fired up ethreal and checked out what's flying over the network... The sniff below would lead me to believe that it might be possible to have asterisk spoof the User-Agent field and register itself? Any thoughts/feedback? Thanks. > > No. Time Source Destination Protocol Info >

I know Vonage doesn't officially have a "bring your own device" type program, but they do offer a softphone. Has anyone gotten Asterisk to connect directly to Vonage? This would be a great help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060329/5bc9f644/attachment.htm