similar to: Chan_Capi questions??

After apt-get update && apt-get upgrade -y wget http://www.junghanns.net/asterisk/downloads/chan_capi.0.2.5c.tar.gz tar xfvz chan_capi.02.5c.tar.gz cd chan_capi-0.2.5c make && make install shutdown -r now asterisk seg faults upon calling in via ISDN. Any ideas are greatly appreciated. rgds pos

Hi, If anyone is looking for a small Asterisk installation I have managed to get it down to 296MB (If you remove the kernel source code.. could probably be made smaller if some of the devel packages and asterisk source is removed as well.) To do it I used Trustix Secure Linux 2.0 (http://www.trustix.net), did a minimum install with ssh support(92MB) and then added the required packages

hi all talking to this friend if mine just now, I realised I had no 'micky mouse' sound as eaerlier with chan_capi and AVM C2. We talked in 1 hour and 18 minutes without encountering any problems whatsoever. This was him calling me, but I don't know if that's important. roy -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356

hi all is it hard/possible to move the following from chan_capi_pvt.h into a setting (preferably global) in capi.conf? #define AST_CAPI_NATIONAL_PREF "0" #define AST_CAPI_INTERNAT_PREF "00" and ... Is it hard to move or copy the txgain and rxgain to [global], either as a given 'default' if nothing's set in the interfaces, or as a overall

I know this has come up before but... Has anyone done anything to get an IAX client built on Windows? I thought someone had started one, but I haven't heard anything about it since - and that was months ago? Anyone have any idea what the status is? -- Ron Gage - Saginaw, Michigan I am looking for work - resume at http://www.rongage.org/resume.doc Electrical Engineering, Linux Programming,

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

Hi I want to set up * as a conference bridge. I would like to be able to conference is SIP calls (up to 12) I am looking through all available documentation for * to get info on how it is done. No luck so far. Can somebody direct me to the info in this subject? Thank you Serge _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online

Hello all, I'm trying to get CAPI to work with two B channels (AVM B1 PCMCIA) on a P4 2GHz (linux kernel 2.4.21) system. All are ok with just one B channel. But when I open a second B chan, the sound is choppy, with too long gaps, and the CPU load is too high (~50%). On the Asterisk's console I get these messages: -- Executing Dial("H323:4478",

I have an old A1 ISDN card that we used to use in the mid 1990's for the delivery of data to our ISP I have seen some users have been using them, with respect to doing web searches. Can someone please let me know what drivers I require to use this card under debian and with asterix, and what the limitations are of using this card. I dont want to make calls but do inbound using it. The

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have. What ISDN card would be reccommended? My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this? What BRI solution would be

Hi, I'm using * with SIP in our LAN and CAPI for external phone calls. Everything works fine (SIP to SIP calls are ok and external incomming calls are ok too (CAPI to SIP)) exept the CAPI to SIP communication. When I try to make an external call from a SIP client, the (ext) phone rings (while the SIP client display "trying...") but when I hangup I don't get any communication and

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hi, Has anybody used AVM C1/C4s on Asterisk? What's the result? I know there may be better cards, but I have 2 C4s which I want to put to good use. Andrea Coppini +356 79 ANDREA (263732) andreacoppini@iwg.info EMPOWER PEOPLE - THE WORLD IN YOUR HAND iWG (iWORLD GROUP) is a global e-mobile company creating, building and growing new businesses. iWG founders are pioneers in creating

Hi All, First of all, please no flames about the footer of this message. It's being inserted into all outgoing email by the server here without asking me personally first once I send out email. Since I've been very interested in setting up an Asterisk PBX + IVR + Voicemail system to support a small business and a foundation for quite some time now, in order to replace their current ISDN

Hello, We have been trying to add asterisk to our Ascom Ascotel 2050 PBX. We have a AVM Fritz!PCI Card connected to an S0 bus extension from the PBX. The fritz card is configured to use chan_capi, and we can make calls SIP->SIP SIP->PBX extension PBX extension->SIP all successfully, we have assigned more than one PBX extension number to the S0 port in the Ascom PBX (it has 8 positions)

Hello. Although I can hear the demo etc. now, I notice during asterisk launch I get :- [chan_oss.so] => (OSS Console Channel Driver) == Console is full duplex == Registered channel type 'Console' (OSS Console Channel Driver) == Parsing '/etc/asterisk/oss.conf': Found WARNING[98311]: File chan_oss.c, Line 232 (sound_thread): Read error on sound device: Resource

Hello, first of all I have to say: I read the handbook but there are some questions left I couldn't answer. It's very basicaly. Sorry about that. I have a AVM B1 PCI - Card. I think there is a I4L and a Capi-Port installed. 1. How can I define the right channels, how are they defined. I found the modem.conf example with an ISDN section but how can I make asterisk load it? 2. Do I

hello, does anybody know how to setup avm fritz pci card in p2p mode ? regards marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/ ------------------------------------------------------------ A mind is like a parachute... it only works when it's open.

I would like to run an agi script (to calculate the cost of a long distance or international call) right after I execute a Dial app. Can this be configured in extensions.conf? It seems the entries right after a Dial app get executed only if the Dial app was executed unsucessfully. Would I have to execute the dial app from the agi script? Thanks in advance. Dan -------------- next part