similar to: FYI: G723.1 Licensing Prices

Make sure you are using G.711a, G.711u or GSM codecs.. I have not been able to get iLBC to work and someone the other days couuld not get SPX working.. You will need to enable/disable the codecs in X-Lite.. If you also want to control the codecs that * uses then put the following in the general section of your sip.conf disallow=all allow=alaw allow=ulaw allow=gsm Hope that helps.. > Hi,

Hello, Would you please suggest me, where can I buy g723.1 liscence in cheap. I might need a liscence for 10-50 channels. Thanks,

Hello, I am relatively new to Asterisk and I need to compile the G.723.1 codec for Asterisk. I downloaded the ITU source code, placed it in the codecs directory, but apparently Asterisk needs a rather different library than the one provided from ITU. As I've seen in the mailing list archives, there are quite a few users who were able to compile G.723.1 in *, so, could someone kindly share it

I hope this doesn't show up twice (posted from wrong mail adr.) Hi Eric, You can actually get boards like this already from companies like Mapletree. Its a hardware pci carrier card where you add the number of DSP modules that you need. This hardware may be a bit 'high end' for most users on this list but several people seems to address this issue pretty often. One card may be

Has anyone out there successfully set up their * box to terminate their VONAGE calls? I (and I am sure lots of others) would love to hear how you did it. I'd like to be able to get rid of the extra hardware I have hanging around here and use the ASTERISK machine to handle the SIP termination instead of needing to have a Linksys modem (w/phone) and an additional X100P card. Thanks.

Hi, I cannot get SIP channel working with folowing codec configuration: [sip] disallow=all allow=g723.1 ;I need this codec between sip phones (BT100) allow=ilbc ;Use this codec to others Calling between BT100 SIP phones is OK - asterisk makes native bridge (with g723.1) between them. When I'm calling from SIP to other channel (iax,zap,...), asterisk is not able to chose right codec

Hi, First of all I am not sure that what I am trying to do is correct/supported, but here is what I'm trying to test: Some of my endpoints only have g723 codecs. Because of this I am only allowing g723.1 codec in sip.conf and h323.conf. Calls between endpoints work fine. I am trying to configure voicemail and meetme applications. I see that all voice files in asterisk are in gsm format and

Hi all, i don't know how often someone ask for this, but i ask agian: Is it possible to use G723.1 with * or not ? I tried to use G723.1 from * over OH323 to a gatekeeper from my provider. The situation is following: Zap/analog ---> IAX -----INTERNET-----IAX--->OH323---->GATEKEEPER/PROVIDER The provider supports G723.1. Can someone help me ? Regards, Thomas.

Hello, all How can I write sound file with external G723.1 codec ( actually I have CISCO that can make H323 call to Asterisk box with G723.1 or G729 codec ) I am trying to start Record application by specifying in extensions.conf [writesound] exten => s,1, Answer exten => s,2,Record(soundexample:g723sf) or ...... ( soundexample:g729) I'am using oh323 channel driver, in oh323.conf

In article <02a201c64f16$7376fb10$0201000a@JACK>, balgaa@micom.mn says... > Hello, > > I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. Can you send us more information about this free g729 codecs? -- Tomislav Parcina tparcina#lama.hr

Hi, Want to do some experiments with the G.723 codecs - where can I download the 723 source code for Asterisk? I know there are some ongoing discussion regarding patents and license fees for the g.723 but I have some hardware on which I only have the 723 and need to test it privately. Thanks! Dan _________________________________________________________________ Use MSN Messenger to send

? There seems to be a memory violation when calling celt_mode_create(48000, 240). ? The function compute_pulse_cache() calls celt_alloc (the second one, bits=celt_alloc()) in order to allocate 343 byte, but it is using about 872 bytes at that location, which will be deleted by the following allocations. ? In this case the following encoder call crashes at first run. ? Sorry, my time is very

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hello list , I?d like to announce possible problems with migrating any version prior to 1.0.2 to 1.0.3. Pay attention : 1. Codecs Codecs names/description have been changed . For example : versions <= 1.0.2 voip*CLI> show codecs Disclaimer: this command is for informational purposes only. It does not indicate anything about your configuration. 1 (1 << 0)

Hi, Every time I dial into my asterisk box i hear nothing but asterisk jittering. The following is an example of what I get on the asterisk CLI Thanks *CLI> DEBUG[81926]: File chan_sip.c, Line 3826 (check_user): Setting NAT on RTP to 0 DEBUG[81926]: File chan_sip.c, Line 4807 (handle_request): Check for res DEBUG[81926]: File chan_sip.c, Line 952 (find_user): Call from user

Hi all. I'm trying to get a simple configuration working so I can later expand it to something more interesting. I'm using kphone to call an extension on the * server. When I try to connect, I get this error: DEBUG[81926]: File chan_sip.c, Line 3562 (check_user): Setting NAT on RTP to 0 DEBUG[81926]: File chan_sip.c, Line 527 (__sip_ack): Stopping retransmission on

Hello Everyone, We are looking to transition our 23 channels from testing/lab into production. During testing we used the free open source g729 license using the instructions found here: http://blog.manhag.org/2010/05/installing-the-free-g729-codec-for-asterisk/ A little more about our setup. All recordings have been converted to G729, all voicemail messages are also in G729, finally

I thought I was counselor that convinced me that an extremely guiltyIn its entirety, Straight kill at least 89 in BaghdadTwin attacks. These exciting stocks right for your business! It will assist you to feel the edge of market!!! No more doubts like ?and what if I lose my? money ? MARSHAL HOLDINGS INC(MHII.OB) APPROVED share!!! Exactly 300% of your success on markets of shares Look at this

Found a great site for REALLY CHEAP airfair! I got 80% off a flight to Japan from Canada! Infact they have 80% of to all destinations! A must SEE. Best deals on really cheap airfair at http://www.buy-cheap-airline-tickets.info/Cheap_Airfare.html --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails:

To all: I'm using RBloomberg to pull historical equity prices across a range of international markets. Bloomberg defaults to returning stock prices to R in local currency, for example, blpGetData(conn, "ALUA AR Equity", "PX_LAST",start="09/30/08", end="09/30/08") returns a stock price in Argentine Peso's. If ones use the BLPH function directly