similar to: Extension handling.

Finally got everything up and run with the help of Manny Wise last night. So I am setting up my digital assistant and getting down to the task I need this box to perform the most. I need to have a custom app that I can call that will take me pressing 2 at the menu and have it transfer the call to a offsite phone number utilizing my Zap Trunk. I'm sure someone has done this already. Anyone want

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

I've got a PAP2 that I've got working with asterisk. At the moment, its configured so that when a phone is picked up on it, it connects to Asterisk. My hope is that I can let Asteirsk handle the entire dialplan, including dial tone generation. What would my context in extenstions.conf look like for this sort of dialing. More accurately, how can I get Asterisk to generate the dial tone on

Hi all, How can I configure, in extension.conf, to call and extension and have a dialtone so I can compose a number to dialout? Basically, I want to be able, when I am out of the office, to call in my asterisk box and then dialout from it. Regards, Francois

I'd like to write a snippet of dialtone that plays dialtone and collects a specific number of digits into a variable. Sort of like READ but with a generated dialtone. Naturally, I want the dialtone to stop playing after the first digit. I can't find this anywhere. Only thing I can think of is a no-password DISA. Is this the correct method? Is there a better one? </edg>

Hi, I have just setup a DISA setup whereby people can dial in, authenticate, are given a dialtone and can then call out. Everything works however there is a 10 second delay after the user enters the number and presses #, until the system does anything. Here is the relevant section from my extensions.conf: -------------- next part -------------- An HTML attachment was scrubbed... URL:

Deutsche ?bersetzung folgt / German version following ===================================================== Hello, i have Asterisk running with 2 ISDN-Cards. One AVM Fritz for connection to german ISDN and one HFC-compatible-Card (NT mode) for connection to ISDN-Phone (later: ISDN-PBX). Here is my actual installation: ISDN -> Fritz - ASTERISK ? HFC-NT <- ISDN-Telephone If i pick up my

We are using DISA with local SIP users. The user enters in a 2 digit code then they get a dialtone and the phone dials out. The problem is that the calls waits 10 seconds after the outgoing number is dialed, no matter what I put for the timeout values. Anyone else using DISA that has run into this? exten => _2X,1,Answer exten => _2X,2,DigitTimeout(2) exten =>

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

First, please forgive me if this is a total newbie question, I've only just begun to scratch the surface of asterisk. I currently have a dialplan set up to let me dial a specific extension, authenticate the user, then have * dial a hard coded/programmed overseas number. What I would like to do is set up my dialplan to have an extension that offers up an outbound dialtone allowing the

I am a little green when it comes to all this but I am trying to connect our PBX to an asterisk server using a TDM400 with 4 FXO modules. I am able to dial an extension on my PBX handset and I get a dialtone from the PBX. After 2 rings I then hear the asterisk server connect and I get a dialtone from asterisk. I am then able to dial an extension on another asterisk server. My question is: How do

Hi, I had asterisk installed, ISDN-adapter, some x-lite software-phones and I can call betweens the softphone- and 'normal' phones during the ISDN-card. 2 questions now 1) Is it posible to create policies, so that some SIP-users can dial ALL numbers, and some SIP-users not are allowed to dial eg. 900xxx-numbers, 30xxxxxx (mobilphones), 40xxxx(long distance) and if possible on time

Hi Folks, I'm trying to test out Asterisk overall. I'm having some problems with DTMF. Currently I'm playing with DISA, but I'm worried this will happen when I get to implementing AAs etc. I have a free SIP trunk from IPKall that I'm trying to make work. I'm able to receive calls, and I've now setup and extension with DISA and a password. I connect ok from the

Hi, Is it possible with asterisk to deliver a dialtone to a software phone, such as kphone? I'm able to dial, but the silence seems to confuse my users :) thanks, lane

Lists, ? ? Hi, good day, i was being task to create a DISA access for internal purpose of the company, i'm having a problem to work with it with authentication, but i think it's really a straight forward thing to do, can someone enlight me on this. thanks ? sample code snippet ? ???? exten => 5,Goto(inward,s,1) ? [inward] ? ?????????? exten => s,1,Disa(1234|outgoing) ?????????? ;

Hi everybody, I am having DTMF detection problem on DISA with my callback system. For many users, it keeps playing the dialtone even after they have input their number. I have trunk setup to both g729 and ulaw. What could be the reason for this problem. Some users have to dial a few times before the system can recognize their dialed number. -- Zeeshan A Zakaria -------------- next part

Greetings Asterisk users! I'm trying to setup Asterisk system to act as a callback system together with callcentric (http://callcentric.com) but it appears that I hit common DTMF issue and I want to workaround this problem. Basically my current setup is the following: 1) I have dedicated Asterisk server that it is linked to my callcentric account 2) I have US phone number (DID) from

Hi All... I'm currently trying to have an extension of my Lucent Partner phone system connected to Asterisk using an X100P. The issue I'm having is that the Lucent Partner analog port connection have different ring and dialtone than the one specified for US in indications.conf. Anyone have accomplished this connection before. I need to know what I should use for the different

Hello, Here's what I'd like to do: call my Asterisk box from a phone, hangup after a few rings, then Asterisk calls me back and presents a dialtone, than I can dial any valid number in the context the call originated. I've done it with CAPI (thanks to the script on http://www.junghanns.net/asterisk/page14.html), I'd like to do it with H323. Problem is, how to present a

I would like the ability for a sipura sip device to instantly connect to an asterisk server as soon as the sipura sip device goes offhook and before any digits are pressed. This way asterisk can provide the dialtone and the dialplan. This also allows me to play a greeting to the phone before giving them a dialtone. Is there any way to do this, like possibly having the sipura device dial a