similar to: Newbie - Looking for pointers

Hi, I am looking to integrate Asterisk with a Siemens HiCom 150e via BRI and wondered if anyone is able to offer any advice. In simplistic terms, my goal is to pass calls from the HiCom to the Asterisk box. e.g: HiCom user dials access code and can call Asterisk extension or establish SIP call over Internet. Likewise, I'd like Asterisk to be able to present a call to the Hicom, either

I have a strange problem with overlap dialing. I installed an asterisk server between a Siemens HiCom PBX and our telephony provider. Everything is working fine except some strange problems with the dialing of the fax (connected to the HiCom PBX). It seems to me that if dialing takes too long Asterisk just hangs up the channel without recognizing that the fax machine is still dialing: (Fax gets

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

hi, we are currently planning are large site which will migrate from an old siemens hicom pbx to asterisk. it will be a slow migration, the asterisk server will be inserted between the telco E1 and the hicom. new phones will be sip ones. the customer has several fax machines and analog phones (some of them have to be explosion-proof). around 50 analog ports in total are needed. as we are in

Just cvs'ed about 40 minutes ago (10:15 CST 8-8-03). Segfaults when I use a queue app in many different scenarios. When calling phone is only member of queue I get a segfault. When 1st called extension is outside line I get a segfault. Many other scenarios as well. Unsure how to go about troubleshooting. Any ideas? Jim Friedeck

Hi, Is is possible to implement this: Hicom150 --- BRI (QSIG) ---- Asterisk I've been reading Siemens documentation and they say: "Digital nailed connections Corporate communication networks can be implemented over digital S0 or S2M nailed connections between several Hicom systems using the CorNet N protocol and between Hicom and non-Siemens systems using the QSig protocol. The

Hi Everyone, Got a setup as follows: Telco ----> Siemens HiCom 300E <----> Asterisk1 <----IAX2 Trunk----> Asterisk2 <----> Siemens HiPath 4xxx The solution works except for one problem. Incoming calls from the telco get redirected to the Asterisk1 box with the correct extention, only if there is a callerid set on the call, the Asterisk1 box drops the call (it doesn't

Dear developers, today, I cvs'ed the newest openSSH. Unfortunately, the config.h.in file was missing. I copied it from the tar-ball. Was this my fault or a problem in the CVS ? Thanks for the answer, Lukas -- Lukas Ruf Swiss Federal Institute of Technology Office: ETZ-G61.2 Computer Engineering and Phone: +41/1/632 7312

Hi, I have a server with 2 TE110P cards. 1 card is plugged to telco line, another card is plugged with a Hicom PBX. I want to send some call to VoIP phones and all other to my PBX. I don't known how to make my dialplan : ===========Extensions.conf========== [incoming_call] exten => 090200000,1,Goto(callcenter,100,1) exten => 022956353,1,Goto(callcenter,100,1) exten =>

Hi * :-) I found in the online WiKi docs some information on how to integrate Asterisk with "old PBX"... http://www.voip-info.org/wiki-Asterisk+legacy+integration ...but I couldn't find anything on integration with a Siemens HiCom 150E. Later on we'll migrate to a HiPath 3750 so information covering this model would be nice too... Do you know if any of the PBX listed

We are using MFC/R2 driver successfully in at least three places in Brazil. I have problem with an Asterisk integrated with MFC/R2 with a Siemens Hicom 300. I can get a good audio quality with Grandstream, Polycom, and X-Lite softfones, but SIPURAS and Linksys get a garbled audio, something like a "Darth Vader" voice. We have tried everything in Sipura. The SIPURA 2000 and the Linksys

Hi all, I have this topology: telco_company>ISND30/PRI/>siemens_hicom_150>classic_analog_users_with_extensions_100-499 and I want to integration asterisk PBX on linux redhat 8 for cca. 4 users. so, my first question is, which hardware I need in linux server and which in hicom 150? and my second... it is possible to connect asterisk PBX directly to PSTN? in this case I'll have this

Hi I've got an Asterisk box connected to a Siemens Hicom 300 using a Digium TDM400. The Hicom provides the calling extension as DTMF at the beginning of the call followed by two *, as in 3425** when 3425 calls my extension, I can hear all 6 tones if I have a handset connected but using Asterisk's Read application straight after Answer() Asterisk usually only gets the last *, sometimes the

Hi I've bought the Wildcard TE110 some days ago but I'm unable to get it to work with Siemens HiCom 300. I've tried this so far: 1. I've used standard cat5 cable cut off on one edge and twisted wires 1 to 4 and 2 to 3 which is according to cisco a short circuit for E1 lines. Wildcard takes a few seconds and sets the link to green (OK). 2. I've tried to connect our running

Greetings, asterisk list and community, I have a problem in how our telefon switch (Siemens HiCOM) "talks" with my new configured Asterisk server (V.11.18.0) without my Asterisks server in the middle.... <phone> <--> Siemens HiCOM <-ISDN-> NTBA <-...-> PBX Telekom A phone connected to the switch requests an "Outgoing" line by dialing "0".

I've been trying to get Asterisk 1.4.X running under Solaris 10 x86 with limited success. I can build Asterisk and get it started but have run in to a problem with a segmentation fault with the "help" command in the CLI. When I start Asterisk: # ./asterisk -vvvgc Asterisk 1.4.9, Copyright (C) 1999 - 2007 Digium, Inc. and others. Created by Mark Spencer <markster at

Hello all, I really checked voip-info.org but it still seems to be not very easy and I just hope that there is anybody with a simular config. We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper than a channel bank :-) Carrier ----S2M------ * -----S2M------Siemens | |

I'm running Redhat version 9 with a TDM400P and AVM B4 ISDN2 card. I am assuming the first step to get * working is to get a tone from the fxo ports, having looked and played with both the zapata and zaptel files, I still can't get anything.on the ports. When starting asterisk -vvvgc it does not appear to be loading Zapata file. Any guidance for a newbie would be greatly appreciated.

I've tried two completely different scenerios. 1) Debian (sarge) with the Asterisk 1.0.5 package. 2) Redhat 9 with Asterisk CVS 1.0.7+ I can't get the AGI "STREAM FILE" command to work with a simple bash script. I can get other AGI commands to work like "SAY NUMBER 123" etc. I've set AGI DEBUG and have started Asterisk with -vvvgc. No error messages, returns

Hey all, Does anyone know what this means? I was running asterisk fine. Installed it on a new pc and I am using the g729b. codec that is optional. I ran the install for the codec it went ok but when I run askterisk via asterisk -vvvgc it gives me this error anyone know? I make sure I entered in the correct reg number. I followed the steps correctly. Too Registration error! Please try