similar to: Parking calls - why doesn't work?

I have the standard parking.conf but extension 700 doesn't show up in my dialplan.... Why? I can dial 701 which tells me that I don't have any calls parked there. 700 just gives me invalid extension noise.... Should I have extension 700 defined elsewhere? Thanks parking.conf [general] parkext =a 700 ; What ext. to dial to park parkpos => 701-705

Anyone having trouble parking calls? I haven't tried it in a while, but it seems to have stopped working. If I dial 700, I get a invalid extension. I have "include => parkedcalls" in the correct context, and I can dial 701, which tells me no call is parked there. Any ideas? Parking.conf is stock.

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I'm trying to implement call parking with asterisk and Cisco SPA504G phones: features.conf parkext => 700 parkpos => 701-702 context => parkedcalls I defined one of the unused keys to park the calls: Key2: fnc=sd;ext=700 at 10.0.1.103;vid=1;nme=Park I also defined two other keys to pickup/unpark the calls: Key3: fnc=blf+sd+cp;sub=701 at 10.0.1.103 Key4: fnc=blf+sd+cp;sub=702 at

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem.

I know the call parking feature changed in 1.4.23.1 to fix some serious issues. I'm seeing a major change though which I find disturbing. A person parks a call by transferring it to the parking position (700). When the timeout value is reached, the call is NOT returned to that device, but rather the 's' extension of the phone's registered context (in this case [unrestricted]).

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820

I'm still struggling to pickup calls. I now have a single context (entryocginternal) where I have "include => parkedcalls". The log below shows me calling from one internal extension to another, then picking up, then parking the call. -- SIP/239-0915d5c8 is ringing -- SIP/239-0915d5c8 answered SIP/233-0915bf40 -- Packet2Packet bridging SIP/233-0915bf40 and

Hi, I'm unable to pick up parked calls after they are transfered. I get the "transfer" message when I press # and then I'm told "701" The extension I'm dialing goes to the on hold music. I'm disconnected, I hang up, dial "701" and I see this message on the console "Everyone is busy/congested at this time" I just have the default

I'm trying to implement parking with only one button to park and unpark a call. Scenario: Call is answered, I press the button (on a Cisco SPA504) to park the call, it comes to [from-office] context where the call is parked successfully (there is no parking lot number announcement though). To unpark, I press the same button, it comes to [from-office] context, and the call is picked

I am trying to test the call parking, but It doesn't fonction :(these are my config files.extensions.conf:include=>parkedcallsexten => 4000,1,Dial(SIP/4000,60,tT)exten => 4001,1,Dial(SIP/4001,60,tT)exten => 4002,1,Dial(SIP/4002,60,tT)In features.conf:[general]parkext => 700 parkpos => 701-720 context => parkedcalls [featuremap]blindxfer => # disconnect => *0

Hello, I'm considering paying Digium to do a modification to Asterisk so that calls can be parked on specific user-defined numbers(transfer to 701 and it's parked on 701, transfer to 702 and it's parked on 702) instead of the way Asterisk currently does call parking(transfer to 700 and then it tells you where it put the call 701-720). What would be the price range for this feature to

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

I'm trying to get call parking to work, but I've run out of things to try. I can place a call between two internal extensions, then on one extension transfer the call to extension 700, and the call gets parked on 701 but I don't hear the extension number when I do the transfer. I can hangup and call 701 and get the call back. Here's what I see: (comments added on lines starting

Asterisk Version: 1.8.1.1 Problem: Multiple Parking Lots Issue: Not redirecting to the right parking lot. Always uses the first parking lot from "parkedcalls show" or "features show" Asterisk Working Version: 1.6.1 Steps Taken: In features.conf added: [parkinglot_test] context => parkedcalls-test parkext => 700 parkpos => 701-710 parkingtime => 120 findslot

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state