similar to: * behind ISDN pbx - Forwarding to extensions with in primary pbx

I just join this list. Did anyone give a reply to this question? I have been struggling with this same problem. Sam Aylestock Sr. Network Administrator TREEV(r) Proven Solutions . Real Results .(tm) Tel: 703-904-3139 http://www.treev.com/

Hi, I'm just in the process of replacing a crappy Siemens PBX with a new and shiny Asterisk system. To connect Legacy equipment I hooked up a small ISDN PBX (DeTeWe OpenCom 36) to one port on a Junghanns.net quadBRI card. That port is configured for NT Point to Multipoint (Mehrgeraeteanschluss) mode. Now I can place calls from the ISDN PBX to the other Asterisk extensions but the other way

Hello. I am going through the documentation and trying to find if asterisk can help me in my case. It is quite difficult to find answer because I do not know the exact question. I have two location. Each in different country. Both locations have Siemens HiPath - different type and software. I can not use card that would allow me to connect those PBXs using SIP. But I have some free ISDN and

Hi, I'm integrating Asterisk to legacy PBX via ISDN router. If I want to call legacy PBX internal extension I need to specify MSN as caller id and local number to call. I wonder if I can cal out via Fritz & CAPI on any msn I want, or are there any limitations - I've read something about 5 MSNs limitation and wonder if it still holds ? Thanks in advance, regards, Rob.

Hello, I am trying to use * to handle anonymous ISDN callers. Something like exten => 5150/0,1,Congestion should work but doesn't. Apparently because the ISDN CAPI doesn't use 0 for callers who don't send their number. Is there a way to make * identify ISDN callers who use CLIR? -Walter -- Walter Doerr =*= wd@infodn.rmi.de =*= FAX: +49 2421 962001

We have been working a OpenSer/Asterisk solution to replace our Avaya PBXs.The OpenSer is to provide scalability and the Asterisk to provide rich features.I know this has been many times for calling card platforms but I'm not sure if anyone has a good scalable solution they are using on their virtual PBX or in a CPE PBX environment?If so I would like to talk to them about buy their deploying,

Hi, I would like to implement a inexpensive home PBX with Asterisk. I have an internal ISDN bus with 6 ISDN phones. I now thought, I connect a Fritz card to my Mehrgerateanschluss (Point-to-Multipoint) supplied by my provider and a second Fritz card to the internal bus. Will this work? Thanks for the help, Arik

Hello all, does anybody have experiences with DDI on ISDN BRI? I would like to order DDI with 10 or 100 numbers from telco company, and use DDI numbers for direct calling SIP/H323 clients. But I don't know if Asterisk supports it, in archive I found only one answer about it, and I'm not sure. I am going to use it with isdn4linux card. Maybe DDI is called differently in other countries,

Hello, We have two asterisk PBXs connected. PBX 1 has SIP trunks connected to our provider. PBX 2 is a remote PBX and SIP Trunk connected to PBX 1. We are able to dial extensions either way and PBX 2 is able to dial out using PBX 1 SIP trunks connected to our provider. We would like to use a separated Caller-ID for PBX 2 and cannot figure out how to do this. Any suggestions

Hi, Sorry for maybe not a very list related topic, but I have always been curious if there is information on how many Asterisk based PBXs are operating Worldwide? Thanks and hope the community will not reject my curiosity! :) Best Regards, Vallu Sevana Oy -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

The Wiki mentions Lucent PBXs but really only the large ones. I've got to get a small 4 x ISDN in with 4 proprietary ISDN out plus 4 analog out connected up to an * to give VoIP capability. I have no docs at all. Looking at the front plate it has 3 incoming connections 2 in use marked T0 and one unused S0. I have an HFC card and wonder if I can use bri-stuff to make use of the S0. -- Dave

Hi All, First of all, please no flames about the footer of this message. It's being inserted into all outgoing email by the server here without asking me personally first once I send out email. Since I've been very interested in setting up an Asterisk PBX + IVR + Voicemail system to support a small business and a foundation for quite some time now, in order to replace their current ISDN

Hi, i want forward a call witch is comming over isdn (avm b1 witch i have) out to isdn (same card 2. b channel). The call is comming (one b channel open one is free) the forwarding is processed (snom 200) all seems correctly. Then the message that the b channels all busy, but so is it not. Forwarding to a sip phone works. Can anyone help me with that ? nicolas SNIPS: ------ ==

> -----Ursprungliche Nachricht----- > Von: Josh Coalson > > --- Tor-Einar Jarnbjo <Tor-Einar_Jarnbjo@grosch-link.de> wrote: > > Hi, > > > > have I just overseen a link, or is the format description on > > http://flac.sourceforge.net/format.html lacking information on how to > > actually decode the residual partitions to PCM sample data? > > you

Hi, I am having some trouble with ISDN Dialout. Using a Netjet-s PCI Card. When in Minicom, the only way I can dialout is if i issue ATS18=1 First. Otherwise I get a BUSY message. So thats fine. But when I dialout from asterisk, I get an immediate hangup, so my guess is that asterisk is not issuing ATS18=1 to the ttyI device. Here are my configs, any input would be greatly appriciated.

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct cable wiring and setup the PBX's port

Are there any switchvox/fonality type Asterisk based PBXs where I can buy just the software? I don't want to buy their 'bundles' that come with junky PC hardware. I just want their software/GUI to run on my hardware. Does Asterisk BE come with a GUI management console for managing phones, queues, VM and the like? -Matt -- Matthew S. Crocker Vice President Crocker

Hi I came across couple of pointers on the Internet regarding solutions available for providing hosted PBX service. 1. Multiple PBXs: Using separate hardware to host each PBX. Pretty straightforward, but no hosting company wants to use it. 2. Multi-tenant PBX: Configuring multiple PBXs within the same instance of Asterisk. I.e. partitioning a single instance of Asterisk into multiple PBXs by way

One problem when migrating from an NT-PDC to a 3.0.4SAMBA-PDC, the user ABC has different SID's. So I want to change the SID of user ABC on the SAMBA-PDC with the profiles-command. Suggest: User ABC in Domain NT has SID S-1-5-21-1234 User ABC in Domain LINUX has SID S-1-5-21-9876 So, on the Samba-Server I did: Profiles -c S-1-5-21-9876 -n S-1-5-21-1234 I get the error message: Could not