similar to: X-Lite Build 1016

Does anyone have any views on the best software base SIP client to use that normal users could use with Asterisk without being too techie ? I have tried the X-Lite client with varying success. The first version worked OK but music on hold broke the voice paths and the slightly newer version initiated the call but failed to make the voice connect in both directions. The SJphone client works but

Does anyone have X-Lite build 1059 working fully with Asterisk? The GSM Codec works very well now but we have problems when using G711 in that when I setup a ping between the two sites and then watch the latency, it steadily increases and starts at about 150ms and goes up to 2500ms within about 20 seconds. I have not investigated fully but I guess that its sending ever increasing size packets.

I am having a problem getting music on hold working one of my servers. I have had this working on a PII 400 just fine but decided to upgrade my Asterisk server to a PIV 1.5ghz. I have installed mpg123 which seems to be working fine but when I start *, I get the following error message at the CLI prompt when I start *: WARNING[81931]: File chan_oss.c, Line 232 (sound_thread): Read error on

Does anyone how you might detect a period of x milliseconds of silence using AGI ? Rgds, Stuart

Has anyone got the BT Speedway (AVM Fritz) card working on a RedHat 8.0 system with *. If so could someone give me some pointers on getting the right sequence of installing the drivers and which versions to use. Thanks, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone tried to use * and an X100P in Spain. I have enabled busydetect in zapata.conf but still its not detecting busy correctly. I guess that this is because the busy detection routines are looking for different tone sequences and frequencies. Anyone any ideas ? Rgds, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone had any success using the Florz patch for zaphfc ? I have a * system with 2 HFC cards which is working fine with 2 PTP ISDN lines however the users are complaining of crackles on the line which I am assuming is related to the IRQ issues raised by Florz. I have tried to use the patch but it errors trying to patch zaphfc.h Any help would be appreciated. Regards, Stuart -- No virus

Does anyone know of a Java based SIP client and if so have has anyone used it. I found JAIN at https://sip-communicator.dev.java.net/ but have not tried it yet. Rgds, Stuart -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030818/ea1e2717/attachment.htm

Hello Since I am getting a bit concerned about the SCO vs IBM issue, I was wondering if can I can setup Asterisk on FreeBSD is it supported ? Are drivers for Digium cards available on FreeBSD ? Thanks Ajit ----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, July 30, 2003 3:05 PM Subject: Asterisk-Users

I've made some progress getting this Tripplite to work: http://gathman.org/2016/07/30/Standard_Schmandard/ Basically, plug it into a USB hub that actually implements USB2.0, then power cycle the port when it hangs. It does seem to be a hardware problem with the USB controller. On 05/24/2016 09:06 AM, Charles Lepple wrote: > On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: >> I

On Fri, 5 Aug 2016, Marco Walther wrote: > On 08/03/2016 05:25 AM, Stuart Gathman wrote: >> I've made some progress getting this Tripplite to work: >> http://gathman.org/2016/07/30/Standard_Schmandard/ >> >> Basically, plug it into a USB hub that actually implements USB2.0, then >> power cycle the port when it hangs. It does seem to be a hardware >>

Hi, Anyone succeed using call transfer function in X-Lite? It is stated that this feature is available in the Lite version too, but for me it doesn't work. Clicking on Transfer button, then entering the number and then clicking again on transfer doesn't work. I miss something? Thanks, Dan

On 08/05/2016 03:03 PM, Marco Walther wrote: > On 08/05/2016 01:36 PM, Stuart D. Gathman wrote: >> On Fri, 5 Aug 2016, Marco Walther wrote: >> >>> On 08/03/2016 05:25 AM, Stuart Gathman wrote: >>>> I've made some progress getting this Tripplite to work: >>>> http://gathman.org/2016/07/30/Standard_Schmandard/ >>>> >>>>

Hi, I have a polycom reboot script which sends a NOTIFY with check-sync. It worked fine with 1.3.4. After I upgrade to 1.4.1, it stopped working. Anyone has the same problem? Thanks, Richard

Disabled echo canceller because of tone (tx) on channel 10 I understand that the PSTN companies use their own echo canceller's, send a tone across 2100hz, the problem we're having is people are complaining of echo on random calls. I'm assuming this may be the cause. Is their anyway to 'ignore' the disabling of EC? Or would be just be a manual code change.. Matt

I bought this UPS to use with NUT. I've used Belkin, APC, CyberPower, Best, Powerware upses with NUT on dozens of servers beginning with RHEL3. http://www.amazon.com/Tripp-Lite-Display-Protection-SMART1500LCDT/dp/B009TZTGWK Since this was advertised as USB HID, I didn't expect any problems. Bad idea (should have gotten the Cyberware with somewhat less runtime). Initially, it seems to

On 9/23/2020 1:09 PM, Stuart D. Gathman wrote: > I solved this problem a few years back. > > https://github.com/sdgathman/trippfix > > The short answer is USB is broken on the model (but the power management > is excellent, handling switchover to generator power without a hitch). > > The workaround is to do a usb port power off when the Tripplite USB > hangs.  But hubs

Hi there, I have an X-Lite phone on my box and I'm trying to register it with a remote Asterisk box. Both the X-Lite and Asterisk are behind a NAT. I know it's a pain to do because of SIP not working well with NATs, but I know there are ways to do such a thing...moving the Asterisk box outside the NAT is not a possibility at the moment. One thing we tried was setting up a VPN, but

On 08/03/2016 05:25 AM, Stuart Gathman wrote: > I've made some progress getting this Tripplite to work: > http://gathman.org/2016/07/30/Standard_Schmandard/ > > Basically, plug it into a USB hub that actually implements USB2.0, then > power cycle the port when it hangs. It does seem to be a hardware > problem with the USB controller. Finally an idea;-) I had the same problem

I'm new to Asterisk and have installed it on OS X. I am trying to use an X-Lite softphone to connect through Asterisk to FreeWorld Dialup and am not having any luck. I have looked at several settings pages at voip-info.com but have had no luck. I am on a school network which I assume has some security but the particulars are unknown as they are not very helpful. It is necessary to