similar to: X100P in Australia (was Asterisk-Users digest, Vol 1 #840 - 13 msgs)

G'Day, I need from regarding using the X100P. Some are specific to Australia and I have been told in IRC there are already existing users in oz, so I would appreciate your input. 1) Is the X100P Australia telco approved? 2) I have setup asterisk with X100P and whenever I dial in I cannot get any callerid information. Is this standard behaviour? If not how have other australian users managed

Hello list, I have an X100P clone card, and I've been trying to get it to receive Telstra Caller-ID without any luck. Hence these two questions:- 1) Will a genuine X100P work? 2) If so, where can I get one in Australia? Cheers, Jon

Well, Once upon a time, I had problems receiving callerid, and then one day, Mark was logged into my asterisk box helping with something else, and I asked him about this, and he showed me a nice tweak to some source file that made it work. Some time later, I must have done hundreds of CVS updates, and along the way, lost the above patch (one liner) and so callerID hasn't worked for a long

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=asreceived

Hi All, This isn't really a question, but it's an issue I experienced that was driving me crazy for a few days, so I thought it might be good for the archives. Basically what was happening was everytime a particular customer called (long distance), the line would disconnect immediately after answering. I thought it might have been the phone, so I swapped the phone with another - still

John, I have tried the suggestions you provided. I have setup Dynamic DNS as per the Samba 3 By Example book and this is all updating correctly. I have run the validation steps indicated in the book and all names are resolvable and reachable via hosts, DNS and WINS. I am not sure why winbind would need to be turned off, but seeing as I do not need that currently, I have tried disabling it; the

Doesn't really resolve the issue, but in my case the problem went away when using physical machines rather than virtual machines. The environments are identical - RH ES 3.0 with Windows XP sp1a client (no hotfixes or GPO settings applied). Thanks for everyone's help. On Fri, 2004-05-07 at 15:38, Michael Vermaes wrote: > On Fri, 2004-05-07 at 15:16, Clint Sharp wrote: > > >

To all: We have an opening for a recent graduate to work as a Statistical Programmer at Advanced Micro Devices (AMD) in Sunnyvale CA beginning January 2007. AMD is a global supplier of microprocessors and silicon-based solutions to the communications and computer industries. This position will support the development of statistical applications for engineering groups within AMD's technology

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hi, Just wondering if anyone else in Australia is using the X100P to connect to the PSTN, and what configs they have for it? I'm finding at present when I make a call I get a fair bit of echo of myself speaking, and also the person on the other end can't hear me very well (perhaps need to up the digial Tx Gain? I don't have it configured at present) Asterisk is running on

Hello all, I was wondering if anybody knows where one might obtain a PCI ISDN card supporting a single BRI for use with Asterisk in Australia (and using something like chan_capi). Because of the Isdn4Linux DTMF issue, I don't want one of those cards. I've already spent too much time messing about with my current card. I'm after something like the AVM Fritz! cards. I found one place

You require no changes to detect caller id with a x100p card in Au, however most carriers only provide cid as an extra cost option. Your most likely problem is CID is not being sent to you. If you believe you have the caller id being sent to you, Find a caller id box/phone and confirm it is there. In 99% of cases where I have seen people in Au complaining of no caller id, it was because they

I have an x100p which suffers from echo (no surprise there apparantly :), and a few of the things I've read about tuning out echo say the first thing to get right is the tx and rx gain, and for that you need a few different types of test lines from the telco (Telstra, Optus, whatever). Does anyone have any numbers in Australia for such lines? I think they just need to send out a tone of a

Hello All, Can any Australians who have any info or current patches relating to Caller ID in Australia please drop me a line? There is little or no info on the Wiki regarding this topic, although I am aware of a related patch mentioned in the bug tracker. Regards, Rob Barnes

I have had this imaptest[1] stall. I compared this command with what you have on the website and I was a bit surprised that what is on the website is working. What I have noticed is that if you remove this msgs argument, the imaptest stalls. I am not sure if this is according to design, but one might expect that specifying a secs, makes specifying msgs redundant? [1] imaptest - append=100,0

I agree, but this is still better than crashing the machine... Aron -----Original Message----- From: Michael Renzmann [mailto:mrenzmann@otaku42.de] Sent: Tuesday, January 27, 2004 1:33 PM To: Aron Brand Cc: lartc@mailman.ds9a.nl; roy@xxx.lt Subject: Re: [LARTC] RE: LARTC digest, Vol 1 #1558 - 9 msgs Hi. Aron Brand wrote: > does this. Another option would be to trick the kernel that the

Vielen Dank für Ihre e-mail. Da ich vom 30.09.-06.10 in Urlaub bin, kann ich sie leider erst danach bearbeiten bzw. beantworten. In dringenden Fällen, können Sie sich gerne an meinen Kollegen Herrn Lamotte wenden. Er hat die email-Adresse hans.lamotte@umbreit-kg.de und ist telefonisch unter 07142/596-152 zu erreichen. Mit freundlichen Grüßen Michael Müller G. Umbreit GmbH & Co.KG

If anyone is interested in X100P Cards, I have quite a few brand new ones. Never been opened. $55.00 each, and I'll include ground shipping anywhere in the U.S. If you want one or more, email me off list at bbawkon@malibutech.com And since the discussion has been raging, if you are looking for support, you should buy a new one from Digium. These are sold as-is, (although I will guarantee

If you go to http://hpux.cs.utah.edu/hppd/hpux/Networking/Misc/samba-2.2.3a/ you can at least get the precompiled version of 2.2.3a for 10.20 if that will work for you. Otherwise roll your own. Thanks, Mike -----Original Message----- From: CHENEY,JOHN (HP-Australia,ex3) [mailto:john.cheney@hp.com] Sent: Wednesday, January 22, 2003 2:44 PM To: 'twilson@stl-inc.com' Cc:

I am seeing many, many msgs in log.winbindd with the following text: [2006/04/14 08:54:29, 1] nsswitch/winbindd_group.c:winbindd_getgrnam(255) group system in domain AIXSAMBA does not exist Would anybody be able to point me in the right direction to determine what this is complaining about? One area I do not understand is why it is complaining about AIXSAMBA (the NETBIOS name). There is an