similar to: PRI with variable length numbers

hello everybody, one of our customers which wants a soft transfer between his old pbx to asterisk and sip. the setup is as follows: telco <---pri---> asterisk <---pri---> legacy pbx everything is fine exept that when dialling from the legacy pbx it takes about 3 seconds before the asterisk start to dial. where does this delay come from? has it to do with

Hello This is a fun one for the list... Twice now, the Police have contacted us to say they have had a silent call then hangup from our landline number to the 999 service. As a matter of course, they follow up these calls in case someone is in distress. Nobody here was in distress - well, no more than normal! The Police aren't hugely happy when we tell them it must be a mistake. Thing

On how to even search for this "feature" as I have no idea on what it can be. I've got a meridian linked to * (by EuroISDN) which is linked to a ISDN30. I can make calls from the meridian, and receive calls into the meridian. Great stuff. However, if someone dials an invalid number, then instead of hearing a "three tone", the line just drops and goes dead. The console

Hello, I'm wondering if it is possible to ring X number of extensions simultaneously, and each answered call can be handled with some code. I can do a huntgroup-esque way of dialling, but I want all the dialled numbers to be picked up. I hope this makes sense.. If not please say.. Many thanks! Andy -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi. I just want to make sure I understand this before doing something that might break things spectacularly for our users and customers :) We are using Asterisk 1.6.2.9 and my programming language of choice is Perl. I want, when a call comes in on someone's DDI number (which the person who dialled it can only possibly have obtained by dialling 1471 after we called them), to be able to

Dear All, Thank you for taking the time to read this post - I am *confused!* as to why my asterisk setup does not work as it should. I have an ISDN 30 connection for telephony, a Sangoma card, and asterisk installed. Incoming calls, and outgoing calls work 100%. Making an international call, results in silence, or the error message all circuits are busy Numbers being passed to the trunk for

Hi all, I got into a strange problem here. I've got an asterisk box with bristuff-0.2.0-RC7k, and a HFC PCI ISDN card, running in NT mode. The ISDN card is connected to a S0 bus and to a Siemens ISDN PBX. Two phones are connected to the ISDN PBX and are successfully getting calls from the asterisk box. When dialling from one of the phones, the ZAP channel seems to be missing out on some of

Hi, I've got an important question: I use an E100P directly connected to PSTN, but it does not *really* work as it should be: exten => 1000,1,Dial(Zap/1/1234) BUT: It does NOT dial "1234" but it says in debug mode: -- Called 1/72976451 Apr 26 00:53:00 WARNING[10251]: chan_zap.c:5979 zt_pri_error: PRI: !! Facility message shorter than 14 bytes -- Channel 1, span 1 got

David, I should also note; 246 is my extension, it has IP 172.22.3.238. 172.22.4.8 is the PBX, and 172.22.4.12 is the 2800 gateway. The trunk is called ?testing? at the moment. The route that selects this trunk uses a 9 prefix. This system is in semi-production, so there might be fluff in the log from other active calls. Brendan Ord OntheNet - Network Engineer P 07 5553 9222 F 07 5593 3557

So I thought I had SIP and NAT cracked a long time ago, but something's just happened that's sort of upset the cart )-: I have an * box behind a NAT firewall. Nothing unusual there, this is something I've done many times - sip.conf has the correct nat= localnet= externip= settings, the router has ports 5060-5069 and 10000-20000 forwarded to the internal IP address of the

Yes indeed. Do you have the dialplan, eg from /etc/asterisk/extensions.conf? Something is getting this OUT_3_SUFFIX variable and including it in a Dial to 172.22.4.12. On 18 August 2015 at 16:21, Brendan Ord <bord at staff.onthenet.com.au> wrote: > Starting to make sense when I saw this line: > > > > [2015-08-18 15:01:33] DEBUG[19366][C-00001cfc]: pbx.c:3785 >

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden

>From Slashdot http://slashdot.org/articles/05/07/21/0135213.shtml?tid=126&tid=95 : "One of the points made is that there is sometimes no way to tell the location of a VOIP phone, which is a problem if you are unable to talk. How about if the VOIP app. insisted that you record a 30 second emergency message (stating your location/name/whatever) when being installed and then watched

Hello, I'm having what seems like a weird issue connecting Asterisk 13 (FreePBX 12) to a Cisco 2811 router via a chan_sip trunk. Whenever I try dialling out via this trunk, something appends '@CUBE' onto the end of the dialled number, as per the following examples; Asterisk log; app_dial.c: Called SIP/test/0429123456 at CUBE chan_sip.c: Got SIP response 500 "Internal Server

When I use an analog phone connected to a Sipura SPA-2000 it takes about 3-4 seconds before the number is actually dialled. Very annoying especially if you are connecting an intercom to it. Can I change this behaviour and do I need to look at * config or the config of the SPA-2000? Thanks!

Hello, So, I found this line under macro-dialout-trunk, in extensions_additional.conf (FreePBX, so it controls the conf files mostly); exten => s,n,Dial(${OUT_${DIAL_TRUNK}}/${OUTNUM}${OUT_${DIAL_TRUNK}_SUFFIX},${TRUNK_RING_TIMER},${DIAL_TRUNK_OPTIONS}) If I grep for OUT_3_SUFFIX in all files in /etc/asterisk I get nothing.. Here's a paste of a few things out of the two files that I

I'm trying to find a way in extensions.conf to match ANYTHING dialled, including characters such as *. The following works for numbers... exten => _X.,1,AGI(script) but doesn't catch when someone dialls * first. I tried this: exten => _.,1,AGI(script) which catches when someone dials say, *123 for example, but after the AGI script terminates, Asterisk executes it again with

Hi all, I have an asterisk-server (cvs-head from august) connected to a carrier's switch (DMS/Euroisdn) via a te410p, and I am having problems with DDI (standard 'official pstn' number plus extra digits for 'internal' use) Basically, when the entire number (including the extra digits) is dialled via a redial or a programmed key, I see the entire called party number (including

Hey all, I'm trying to add some logic to a dial-plan to allow the caller to terminate a number with a "#", but also accept it without this terminator. While trying this, I noticed that, for example, extension "_[*0-9]XXX.#" always seems to match, whether the last digit dialled is a "#" or not. It's as if the parser assumes everything after the "."

Hi all! I'm trying to have asterisk route all outgoing calls out via my VOIP provider. exten => _NXXXXXXX,1,Dial,SIP/BYEXTENSION@VOIP seems to have them to in the direct direction. However, debug shows that my asterisk doesn't identify itself correctly: Sip read: SIP/2.0 100 Trying From: "Evert"<sip:asterisk@[my IP]>;tag=as0aca53fa To: <sip:[dialled