similar to: BudgeTone-100 Early Dial

Hi Just recieved the above phone Does anyone have sip.conf and extension.conf example for the SIP phone working with the FXS w100p and the FXO tdm400d any help would be appreciated Thanks Robb

I know the recommendation it to not run more than 2 T/E100P's in a system but what about X100P's.. Usually there are 5 PCI slots in a system, has anyone tried 5 x X100P's in a system? Later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Does anyone have any views on the best software base SIP client to use that normal users could use with Asterisk without being too techie ? I have tried the X-Lite client with varying success. The first version worked OK but music on hold broke the voice paths and the slightly newer version initiated the call but failed to make the voice connect in both directions. The SJphone client works but

I have found that the NTP server is not contacted when the phone (Budgetone 100) comes back from a power down. I must reboot the phone without powering down to get the phone to contact the NTP server for the time. It doesn't matter whether I reboot from the phone's web site or using the menu reset function: either works. I have only tested this with a private NTP server. This may

asterisk-users-request@lists.digium.com is believed to have said: >I don't mean to be rude to everyone who responded to this question, but >I think that everyone is answering the wrong question. The point is that >the message waiting indicator doesn't light up, at all, ever. All that >happens when messages are waiting is that the display blinks and the >phone gives a

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

I've just finished a general purpose configuration utility for the GS phones: 1) Generates files from scratch (using MAC), from HTML config listing, or by directly downloading from the phone. 2) Does multiple simulteneous edits. 3) Can reboot as many or as few phones at a time as you like. I would like to offer it to the list, but there are 2 issues: 1) I want to GPL it first, if

I just got a Budgetone 101 and I have it hooked to my * box. I thought I'd read somewhere that we can program the buttons on these phones to send DTMF tones, thereby effectively programming them. However, according to the user's manual, they have predefined SIP functionality. My dialplan implements the festures I want (transfer, message, stuff like that), so for uniformity, I'd just

Hello, I have a problem with asterisk and Grandstream BudgeTone-100. With default configuration everything works (in anonymous mode and fixed IP), but if Im trying to enable registering, it dos not work. I used 'sip debug' and verbose level 10, nothing happens if I switch telephone on (no messages about bad auth etc). As I understood, after switching phone on at first it will try to

Is there a service like iconnect that does allow dialing out more then one concurrent connection? Asterisk works great with iConnectHere, but they only allow one call at a time. I don't want to setup an account for each concurrent call, because it will make iConnect an expensive service, and besides, all of our calls combined doesn't reach 1000 minutes per month. Any ideas?

Hi All, I was wondering, in my effort to show how Asterisk can replace Call Manager, if there is support for call transfers/forwarding from the users Cisco 7940 SIP phone to either another SIP client or through the AS5300 on to the PSTN. I do see some stuff in the docs but seems to be specific to a local PRI board in the PC of which I don't have. Any experiences/comments most appreciated.

From what I understand, shared interrupts are permitted on the PCI bus. Whether they work for a specific card or not depends entirely on how the driver is written. Someone at Digium should know this. -- Stephen R. Besch, Ph.D. SachsLab 320 Cary Hall SUNY at Buffalo Buffalo, NY 14214 (716) 829-3289 x106

I have solved the time server problem with the Grandstream by having my * box's NTP service mirror a public NTP server. I had to do this because my phones are all on the 192.168 subnet, which is non-routable. For example, assuming that the NTP service is configured and running on your * box, create an NTP mirror which allows access from machines on 192.168.10.X by adding the following

I inadvertently unplugged my Budgetone phone tonight and I think it went out and upgraded its firmware. It is now at 1.0.3.81. Does anyone know how new this might be? Suddenly things that have been working wonderfully before don't work--basically it seems to do the SIP stuff just fine but then all the RTP stuff breaks, even something as simple as retrieving my voicemail from a server on

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

Hello, I am trying latest stable Firmware for GS IP Phone BudgeTone 101 found at http://gs-firmware.gratissip.dk/firmwares/ and the phone doesn't send a register staement (nothing in thertereal log). With the 1.0.3.81 version, the phone register properly. Is ther any know bug with the SW Version? Best regards, Daniel ANDRE -- Daniel ANDRE (mailto:daniel.andre@iris-tech.fr) IRIS

I have spent the morning on this project, still without success. Summary: Yesterday I inadvertently unplugged my Grandstream phone. I might add I did a rebuild of my s/w from CVS at the same time. Since then, the Budgetone seems to talk SIP just fine, but the RTP being sent to it by asterisk "doesn't make any sound." It was suggested I do a factory reset of the phone, which I

Hello list! I'm using "Asterisk CVS-11/22/03-04:28:51" and try to route my normal (classic) phone calls via nikotel (www.nikotel.com). I can talk about 1 minute and get then disconnected. Here my current configuration parts which affect nikotel: register => chabrol:PASSWORD_REMOVED@nikotel/500 [nikotel] type=friend secret=PASSWORD_REMOVED username=chabrol fromuser=chabrol

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Hi list, I have some nontrivial questions. I am no telecommunication guru and I will explain it with my simple words. I hope someone can help me with these issues (with Asterisk 1.0.3): - If I call outside (with Nikotel to German Telekom) there is a remote hangup after 2 minutes. I've seen other people posting this but nothing helped. I luckily managed to get around this issue with the