similar to: Follow-up -- Using Asterisk with Nikotel

Hi, My setup is: IPPhone1 --- Asterisk1 with B410P ---- Patton 4638 --- Asterisk2 --- IPPhone2 I want to evaluate Asterisk1 in TE/PtmP mode. So, Patton box is configured in NT/PtmP (with 3 BRI links between both systems). Anyway, asterisk -rx "pri show spans" keeps replying : PRI span 1/0: Provisioned, Down, Active PRI span 2/0: Provisioned, Down, Active PRI span 3/0: Provisioned,

Hello list! I'm using "Asterisk CVS-11/22/03-04:28:51" and try to route my normal (classic) phone calls via nikotel (www.nikotel.com). I can talk about 1 minute and get then disconnected. Here my current configuration parts which affect nikotel: register => chabrol:PASSWORD_REMOVED@nikotel/500 [nikotel] type=friend secret=PASSWORD_REMOVED username=chabrol fromuser=chabrol

Has anyone had any experience using a VOIP provider in Japan? No matter what I try, my REGISTER string kicks back one of 2 errors: Got SIP response 481 "Call/Transaction Does Not Exist" back from x.x.x.x or Got SIP response 400 "Bad Request" back from x.x.x.x My register string is as follows: 05075034132@ipphone2.freebit.ne.jp I have tried the following also:

Hello, I`m trying to make a call from the snom 100( SIP mode) but whatever number I dial I get a 404 error from Asterisk. Here are my configs and a dump from "sip debug" . But if I make a call from a Zap line (see extension 2382031), it rings the snom phone sip.conf: ------------------------------------------------------------------------------ ; ; SIP Configuration for Asterisk

Hi, a partner, who exchanges voip traffic with my asterisk box, complains, that asterisk ignores hints about ports to use. Hints about ports to use, seem to be a feature of H323. (I'm not firm enough with H323 to verify this.) The remote party opens the media-in channel: remote-ip:port-A -> local-ip:port-B My local Asterisk-box uses the same channel for media-out: local-ip:port-B ->

Hi! I've read in the archives that there are problems concerning Nikotel calls being disconnected after two minutes. I had the same problem yesterday. Is there a fix? There was only a "giving up" statement after the last e-mail in the archive, I'm about to do that too. Here's my sip.conf entry for Nikotel (left out the register stuff 'cause it's working):

Hi list, I have some nontrivial questions. I am no telecommunication guru and I will explain it with my simple words. I hope someone can help me with these issues (with Asterisk 1.0.3): - If I call outside (with Nikotel to German Telekom) there is a remote hangup after 2 minutes. I've seen other people posting this but nothing helped. I luckily managed to get around this issue with the

Hi A few days ago, Kelly remarked that he had previously observed that Nikotel charged him for calls he did not actually complete. I have made a number of test calls to my landline without picking up the calls. I just let it ring once and hung up on the calling phone. A look at the call records on MyNikotel reveals that I was charged six seconds for every of these calls. I have raised a

Hi, Using a couple of sip phones and using asterisk to connect them to a single sipgate.de account. if I call a mobile I have no problem makeing conversions. If the mobile rejects the call (by pressing hangup while it rings), something strange happens: the following is seen in the logfile, everytime a rejected mobile call happens: ----------------- Mar 20 22:52:29 WARNING[4682]: Forbidden

Hi thanks to everybody who responded to my earlier post. I have looked at all the material and links provided and tried everything in there, but it simply won't work for me. My SIP phones register with Asterisk, but they cannot be called (everybody is busy at this time) nor can they call anything (error code 4, whatever that means) not even internal (yes I did give them appropriate

When I place a call using Iconnecthere or Nikotel as my sip provider, I hear no ringback tone when making a call. I have tried adding the 'r' command to the dial sting with no help. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi! > How to do this ?? > To proceed with your answer on PICKUPMARK, where do I put this ??? Look at the example for Asterisk 1.4 on this page: http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup Philipp

Hello, i have asterisk with 2 internal isdn cards - handled by isdn4linux and i need to setup whol system like this route some call beggins with 0 or 00 - long distance through first card, route calls to mobile network via second card ( tehere is isdn gsm gateway connected).how i can do this using only isdn4linux (/dev/ttyi) ? regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza

Hello, is there a way to disable call waiting in sip? I`m using grandstream 101 and even when the phone is in use I hear ringing in the headset. It is pretty annoying , is there some way to disable this? I cant find anything like it in the grandstream docs. Thanks -- Anton Yurchenko<phila@dg.net.ua> Digital Generation

Hi please excuse if this seems obvious, but I am new to this and the SIP section in the Asterisk handbook do not give any clues nor do the SIP examples in there seem to represent real-world situations. I am using Nikotel as a VoIP provider (for now) and I would like to configure Asterisk to sign on with Nikotel so that I can use the telephones connected to Asterisk to make calls using the

Hi I have just been struggling for four days to get SIP working and now as I created a voicemail box, Asterisk has become very unstable and it can't bridge SIP phone to SIP provider calls anymore. Calling internally from one SIP phone to another works fine. Calling internally from a SIP phone to an analog phone on a Zap channel and vice versa works fine. Incoming PSTN calls delivered to

Hi folks, this does look like a bug to me: Asterisk replaces the @63.214.186.6 by @context which obviously leads to a failure. Any comments, do I have a configuration issue on my side that I missed? Cheers, Philipp -- Executing Dial("SIP/philipp-bd5f", "SIP/992365264680@nikotel- out|90") in new stack -- Called 99xxxxxxxxxx@nikotel-out -- Got SIP response 302

Hi all, I registered a SIP account at budgetphone.nl/talkin2ya.nl Receiving calls works like a charm, I even redirected my normal PSTN number to the number I got from them so everything ends up in my * server. Before I ask them to take over my normal phone number I wanted to test all of it, so I ordered some calling minutes to test. Now I cannot get outbound calling to work with them. Anyone here

Which phones do you have? We are using Cisco 7940G phones and I have been able to do this by modifying the dialplan.xml for the phone to rewrite numbers as they are dialed to include the "9" in front of whatever is dialed from the phone. Now you can use the received calls menus without having to edit the numbers before hand. Calvin On Jan 29, 2005, at 12:13 PM, Stefan Gofferje

[mod: Forwarded by Jeff Uphoff. I tried to mangle the headers that it appears as the original post: with an invalid return address. -- REW] A few months back, a very alpha version of bliss got posted. That shouldn''t have happened, but, it was pretty much ignored so I didn''t worry about it. But now it seems there''s a bit of a fuss about this. I''ll post the