similar to: H.323 Gateway Connection

I'm trying to set-up H.323 support under Asterisk. I built a recent CVS release and the ooh323c code from the asterisk-addons. Everything built and installed and the H.323 stuff loads OK when asterisk starts. What is the easiest way to check if the H.323 code is working? I've edited the h323.conf and extensions.conf files but I'm sure that things aren't right. I've

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Hello All, Finally I realised that the Asterisk demo setup didn't include support for h323. (Maybe it should have been obvious) so I went to work out how to get the h323 channel running. I had openh323 and pwlib installed as I'd been playing with vocal so it didn't take long to do cd asterisk/channels/h323; make; make install; make samples, copy the pwlib and h323 libraries to

I have just started laying out the plans for my first project using Asterisk. I am very interested at this stage in getting much needed feedback, critiquing my approach. What are the ups and downs going to be if I develop this project as follows: -The client wants to connect some phone reps in India through a VoIP to their clients. -There will be 3 phone lines, and 1 broadband internet

Hi all, i've installed the a new pwlib (1.5.0) / oh323lib (1.12.0) on my *. Then i've installed the new chan_oh323 (0.5.6). when i try to make a call with "netmeeting" through * ( * dial out with "Dial,OH323/${EXTEN}@xx.xxx.xxx.xx" ) the call will be blocked. Before, there was chan_oh323 0.5.5 and pwlib(1.4.11) and openh323(1.11.7) installed, and it worked. Is here

Update on this problem: I gave up on the "native" h.323 because, like others, I couldn't get audio working. (yes, I tried disabling FastStart in ast_h323.cpp - no change) So I went and got the OH323 code from www.inaccessnetworks.com. Glad to say that everything seems to work so far. Not only does audio work, but even the handshaking is now working in both OpenPhone and even

Hi, I'm still struggling to make netmeeting work with asterisk and oh323. I'm dialing from netmeeting into a regular phone, connected to my TDM10B. everything looks great, except that I cannot hear my voice at the FXS side, just static that increases when I speak on netmeeting's mike. Nevertheless, if I speak on the telephone I do can hear my voice on my headsets. I configured

Hi. After a small war with "underfined sybol" error and conflicts between h323 and oh323 I successfully install h323 channel. Now, I can connect from Netmeeting to SIP and ZAP channels, but I can't here anything. When I call at phone, and try to speak, on another end of line man said, that my voice very low. Microphone volume is maximum... Is there some parameters like rxgain,

Hi all, I'm a student (my thesis work consist in testing interopearbility SIP/H.323) and I begin to work with asterisk in this days. I have to testing to SIP/H.323, since today I have used Vocal system, but there are some problem for this features. In the asterisk mailing list, in the next message I've seen an e-mail """ [Asterisk-Users] Cisco

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

Hi! I am in a H.323 network with a gatekeeper and some terminals. Asterisk is a gateway between this network and the SIP network. Now I can do calls from de foreign network (SIP) to the locla (H.323) but I don't know how to do the inverse. The H.323 terminals use NetMeeting, and when I try to make a call, it says that the number dialed must be registered in the gatekeeper. How can I register

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

All - NEED HELP BADLY.. Using Asterisk with H323 Channels.. Everything is installed but we cannot register w/ Lucent gatekeeper. We ran ethereal and found that it was making GRQ (Gatekeeper discovery requests).. We had provided the name of the Gatekeeper (it's IP) and cannot determine why it's trying to do a GRQ. We want it to go straight into RRQ or ARQ and skip the GRQ.. Netmeeting does

i am trying to make calls between two workstations using netmeeting and asterisk. i get the popup on both when i call the extensions 665 and 667 but when accept, i get this error *CLI> 0:18.190 H225 Caller:8112978 H225 Received connect PDU. 0:18.288 H245:810b388 H245 Read error: Bad file descriptor 0:18.318 H323 Cleaner H323

In the company I work for, quite a few people use Netmeeting to share desktops during training. Anyone know of a way to either connect to their Netmeeting, or an alternative that will work on both Windows & Linux, and not require a server to host the meeting. Matt

Hi all, I have seen many posts on the Shorewalllists dealing with H323. Although lots of them indicated that this is difficult process with kernelrecompilation etc. I just tried what seemed to be logical for me. Surprisingly it worked. Configuration: WS1 ----- FW ------ Internet ------- WS2/Shorewall WS1, FW and WS2 run Redhat9 with its standardkernel 2.4.20. FW and WS2 run Shorewall

What have people found to be the ideal setup for recording asterisk prompts? I'm looking for both the ideal application to record them in, the ideal format, as well as hardware (do I need a fancy studio mic or will a headset mic work?). Thanks, Justin

Hi, I managed to get the codec into netmeeting. Unfortunately it doesn't properly work. I tried to talk vie net, but only erranous packets are decoded. Did I possibly register the codec wiht incorrecxt parameters or is this a problem of the acm codec? bye, D A --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from

Hi Just installed Asterisk on a Debian Woody/testing. I want to create a AGI script that is run after an outbound call is answered. I did this a while back (many versions ago). The problem is Asterisk does not seem to know the AGI application. I create a file test.call and place it in the outbound spool directory: the test.call file looks like this: #Simple test call script. #call my

hi guys, i am getting today my dev kit with fxo and fxs boards. i intend to do the following : 1) be able to route an incoming call from the pstn fxo port to an ip (answering with netmeeting or anyother sip softphone) 2) be able to call from netmeeting to my pstn fxo port to place calls. questions : how can i do this ? what are the commands for this simple setup ? how can i place calls