similar to: Internet Telephony, net2phone

My office network has a RH 7.3 server running Bind 9, Samba, WINS for NetBIOS name resolution, ten+ Win2K workstations, and uses DHCP from the Linksys router to hand out IPs for the workstations. Is there any way to do dynamic DNS updates so that the workstations' IPs are tracked in DNS? Chris Mason masonc@masonc.com Box 340, The Valley, Anguilla, British West Indies Tel: 264 497 5670 Fax:

I use a openLDAP database for authentication on my Redhat 7.2 server. The domain is "HOME". I have had no problem adding trust accounts and authenticating against it. Today I had to change the name of my Win2K workstation from poseiden to poseiden1 for compatibility with a package I am testing. Once I changed it and put in a new trust account, I could not rejoin the domain. I gave up and

I have a Redhat 7.2 server for DNS, Web, File Sharing via Samba, for my SOHO network of 6 Win2K workstations. I have a workgroup, not a domain. The server is on a static IP and the workstations are DHCP assigned the Dlink gateway, which also tells them the DNS IP. I am having a problem where some of the workstations can see some of the others in Network Neighbourhood, but some can't. SMB

In an small business network I have built for a hospitality client, I have several Win2K workstations and a Redhat 7.3 server using Samba for PDC and file sharing, user's home directories, etc. Users can float as there are not enough machines and some workers are not deskbound. Everything works great at this stage. No I have to integrate a Point of Sale system. The POS system runs on Win98

I had a major problem to today. The owner of a company I built a network for had a directory in her home directory containing most of her work documents go missing. I looked at the log for her workstation and she did work on them in the morning. By afternoon, she return to her workstation and tried to open the directory but it was gone. The directory and all the directories and files were there

For all my PBX installations I want to have Fail Over on the main incoming PSTN line so that a power outage does not leave the offices stranded. Is there any commercial solution to this? I would rather a finished product than a home soldering project. Chris Mason masonc@masonc.com Box 340, The Valley, Anguilla, British West Indies Tel. (264) 497-5670 - Cell: (264) 235-5670 - Also (305)-735-3483

My redhat 9 server is using samba-2.2.7a-8.9.0 - everything was fine until I recently tried to change the users password from his workstation, and got the famous "Domain is not available" error. I would like to upgrade the server's samba install but not anything else as everything on the server is stable and I can't have a lot of disruption if there are upgrade problems, which

I just downloaded the 2.2.4-2 src.rpm file from samba.org and installed and compiled on my intel-redhat 7.2 system. When I changed to /usr/src/redhat/RPMS/i386 I found only i386/samba-2.2.4-2.i386.rpm in it. There was no other rpms, even though the spec file says there will be. Here's the last few lines of the build output, I only see two rpms being created.

I ave a several windows 2K workstations in a local network, and I am using Samba 2.2.4 on a Redhat 7.2 server for file storage and DNS. Sometimes I cannot connect from one workstation to another although I can see that it exists. If I type "Net view" I get a list of hosts and I can reach some but not others. Samba is setup to be the preferred master and I am not using a domain

I have installed openldap and the samba.idealx.org ldap configuration and scripts, and now I have ldap authentication working wonderfully well. I'd like to be able to use the same ldap user database for other info such as phone numbers, email, etc, but I don't know how to add it or whether it is a good idea. Anyone done this? Chris Mason masonc@masonc.com Box 340, The Valley, Anguilla,

I have a backup script that copies the contents of a backup directory to my local server at night. The command is run from a script: /etc/cron.daily/backup /usr/bin/rsync -arvz -e ssh user@servername.com:/home/backups/* backup_disk/servername/ The output from the cron job is: Permission denied, please try again. Permission denied, please try again. Permission denied

Hi, I?m looking for settings to configure net2phone carrier in my asterisk. I found this configurations, but it?s not work. I don?t known if this configuration is for voice line or voice access account. Anybody can help me, with other configuration? Thanks. ---- *sip.conf* [general] useragent = X-Lite release 1103m register => PHONENUMBER:PASSWORD@sip.net2phone.com [net2phone] type = peer

I've been trying to use net2phone's sip service at sip.net2phone.com with * but keep getting SIP/2.0 401 Unauthorized. Do you know if this should be possible? So far: I can use an ata186 to connected directly to n2p through sip.net2phone.com without any special settings. I can connect from * to iconnecthere, but, whatever I try from * to n2p produces "SIP/2.0 401 Unauthorized"

Hi All, As Net2Phone don't permit more than one session per account, I configured about 10 sip trunks and configure multiple trunk routing but once the first trunk is used I cannot make additional calls, I also cofigure my dial plan in other way using the chanisavail command but still not working. The chanisavail command configuration is correct as I can make calls using other trunk than

Hello, My server is Mandrake 10.1 eth0 is WAN with static IP connected to 512k DSL eth1 is LAN. I am using squid proxy for internet with NSCA auth. I am able to send and recieve mails. One of the client system wants to be able to make net2phone calls. As of now he is not able to. Howto allow net2phone calls ? Thanks Varun

Hi! Net2Phone is getting a common SIP status code, "404 Not Found," when trying to place a call to our Asterisk server. We're hoping someone on the list can shed some light on why this is happening. We can process a call from Asterisk to Net2Phone without any problems. Net2Phone sends the INVITE but immediately gets the "404 Not Found." The "To:" field

I can cut and paste the log file from a reload right now, and provide you with the other information when I get home after work: tmp*CLI> sip debug SIP Debugging Enabled tmp*CLI> reload Mar 21 14:52:42 NOTICE[23231]: indications.c:397 ast_unregister_indication_country: Removed default indication country 'us' 11 headers, 0 lines Reliably Transmitting: REGISTER

When I try call to net2pohe sip service in my debug I look next: ---------------------------------------------------- We're at 192.0.0.0 port 27916 Answering with preferred capability 1 Answering with preferred capability 2 Answering with preferred capability 256 Answering with capability 4 Answering with capability 8 Answering with capability 16 Answering with capability 32 Answering with

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

I have installed Asterisk on a CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces. I ran through the wanpipe install instructions and configured it, now I can run [root@altpbx asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info