similar to: New Module app_perl

Hi Everyone, I have an asterisk box in my office. It does not display the correct Incomming Caller id. For incomming we are using ISDN Bri line which is terminated in a Digium 4 port bri card (B410P). Like if a number say 02 12345678 calls to our line asterisk displays it 12 12345678. Similarlay if a mobile number say 0416 123456 dials us , asterisk displays 1416 123456. I am not sure where the

I am using asterisk version 1.2.6 with Zaptel version 1.2.5. I have a POTs line coming into a Digium TDM01B. It appears to not be getting CID at all. If I hook up a POTS phone to the line CID comes through fine. Inbound and outbound calls work fine but there is just no CID on inbound for this channel.The incoming route for the channel is Zaptel Channel 0. No DID or CID settings applied. My IP

Skipped content of type multipart/alternative-------------- next part -------------- asterisk1*CLI> soft hangup Zap/1-1 Requested Hangup on channel 'Zap/1-1' == Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1' in macro 'exten-vm' == Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' --

Hi people, I have the following dialplan, but it doesn't have the behavior that I think it should have. [default] exten => 2001,1,Answer exten => 2001,n,Dial(local/3005) exten => 2001,n,Hangup exten => 3005,1,Set(__RINGTIMER=10) exten => 3005,n,Macro(exten-vm,novm,3005) exten => 3005,n,Hangup When I execute the Originate (AMI) with the argument Channel=local/2001, It rings

Dear All, I have an asterisk server version 1.2.12.1 along with trixbox and I am having this nasty problem, I have a TE200P and have an E1 pri attached to it and zttool says it's OK, I have configured the whole 31 channels into one group as follow: Zapata-auto.conf: callerid=asreceived signalling=pri_cpe switchtype=euroisdn context=from-zaptel group=0 channel=>1-15,17-31

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Hi there. I currently have a GotoIf statement that goes to a special extension priority if the CID match with one of the numbers in my "list" of CIDs. The way I've done it now is by multiple OR operators. There must be a better way. Anyone got some suggestions? This is basicly what I want. "If CID Exists in $File, goto s,10". So when I want to add a new CID I

I have call center PCs that switch between an IBEAM SIP softphone and a NEBU IAX softphone (for reasons that aren't germane here). The SIP softphones work fine, but the IAX softphones get a fast busy unless I give them an IAX trunk to use, instead of the PRI trunks that all the other phones are using. I am using Asterisk 1.2.3. svn rev 47264. I've appended a sample call trace. The

Hello everybody, and first of all sorry for my poor English. I'm having trouble with Quadbri installed on Asterisk 1.2.17-BRIstuffed-0.3.0-PRE-1y-e. Everything is working fine, except calling to switched off or "out of coverage" cell phones. In this case I have to wait 40 seconds until Asterisk tell me that "all circuits are busy now" instead of receive cell phone

Hi, I set up a ring group. I would like for people who select a certain voice menu option to ring a list of extensions (I have just one extension in there at the moment) and if it doesn't answer to go to an extension's voice mail. I am using a version of asterisk from CVS, last updated a couple of weeks ago. This line in extensions_addtional.conf sends the call to ringgroup 3 if

I have Asterisk 1.2.29, Zaptel 1.2.24 and Freepbx Setup for a queue up to 15 agents through a PRI line, it was working fine for more than 1 year, suddenly, when there is a load on the queue, the asterisk service disconnects and the calls are dropped. And the service starts again after few seconds, and so on. I am not using fax. I checked PRI by zttool and there are no alarms. The cdr logs

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

How I can change AGI script return status to failure from within the script? It always return AGI Script ........ completed, returning 0 Thanks, Hristo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090515/462d5dc3/attachment.htm

Hi, maybe a dumb question, but it seems that some calls are directed to our central dial in number despite the extensions the callers say they dialled. E.g. they dial 1234-567, asterisk recognizes 12345, it says this is an unknown extension, where it is right, and redirects the call to the central dial in extension 1234-0. This only seems to happen when the numbers are dialled manually. When

Hello, i've recently switched over from 1.0.9 to 1.2.3. I've experienced some (to me) weird behaviour. This is the config for an example queue.conf: [654] wrapuptime=30 timeout=20 strategy=ringall retry=5 queue-youarenext=queue-youarenext queue-thereare=queue-thereare queue-thankyou=queue-thankyou queue-callswaiting=queue-callswaiting music=default monitor-join=yes monitor-format=

When I make a call out on the Faktortel number I am then able to transfer to call to my asterisk meetme room of 801 by hitting 'transfer' then '801' then 'send' on my grandstream phone. This connects my faktortel trunk (and who ever is on the other end) to my conference room I can then make another call using my local pstn service and set up a 3 way (or whatever number

I have the following in my dialplan, counts the number of loops and when it hits greater then 5, exit. It works, but errors initially with, "syntax error, unexpected TOK_PLUS, expecting TOK_MINUS or TOK_LP or tolken; Input: +1". Could somebody tell me why? Thanks: ; **************************************** ; Setup a varriable to count the number of ; times the message has been

Hi Gang, I'm testing 1.8.0 on one of my machines and this snippet "chokes" on line 7 (works fine with 1.4.30) [tb-account-balance] exten => s,1,Set(BALCOUNT=0) exten => s,n,NoOp(Verbose(acct ${digitacc} pwd ${digitpwd} )) exten => s,n(runagi),Set(TEST_RETURN="NONE") exten =>

Hi all, I'm looking for some rudimentary insight on GotoIf() which seems to be failing on me in my dial plan. All I basically wish to do is block a particular caller. Sounds easy enough, but my ternary operator/plan currently is not properly being implemented. Can anyone spot where I'm being a momo? All extensions get forwarded to the following macro: [macro-forward] ; arg1 = phone

I've noticed that with FastAGI (and maybe AGI) that when you sequentially send a sequence of dial commands, if the call is picked up, that after the call ends, the Fast AGI script keeps executing the commands! Is there anyway to stop execution once a call is picked up? I think looking at the result codes after the Dial to determine if the call was picked up or not is not a good idea... if it