similar to: Testing two E400P with E1 cross-cable

Good day all How do i set a connection between 2 asterisk servers via PRI In Bri I would set one to NT and TE How shoud the zapata.conf and zaptel.conf look And how should the cable be? All I got on the web was to set one to "pri_net"...this cant be all? And the cable > pin1 <--> pin4> pin2 <--> pin5> pin3 <--> pin6> pin4 <--> pin1> pin5 <-->

Hello, I have one UPS Infosec XP Pro 2500 RM and it works with windows sw RUPS2000. Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux). On this linux I have NUT 2.6.0 and I stopped now with configuration of genericups driver. Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows: PIN | PC | UPS

Hi all- HELP! This is actually a revisit of a problem that I had earlier with E400P's at a customer site. Customer still gets locked up channel problem, but has learned to live with it (channels clear themselves after several minutes). The symptoms, which I believe are directly related: I'm having problems with tons of framing and "read" errors on my E1 connections (and

About every hour I see the yellow alarms on all or a number of channels of my PRI which is connected to the dutch telephony network, Asterisk keeps on working fine.... Here's an example where channel 1-24 went into alarm: WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event): Detected alarm on channel 1: Yellow Alarm WARNING[90124]: File chan_zap.c, Line 4139 (handle_init_event):

Configuration: Linux wpbx 2.4.9-13 #1 Tue Oct 30 20:11:04 EST 2001 i686 unknown P4 2.5 GHz, 1 GB RAM T400P with 3 T1s plugged in. A flow of 46 calls (spread out over 3 T1s). Each call gets transferred (Dial) to the SIP platform and stays for 5 min. Case 1. Asterisk built out of CVS Mar. 19. Test was running for 3 days. Segmentation fault. Case 2. Asterisk built out of CVS Apr. 1. Test was running

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

Dear List i have upgrade my * box with the latest CVS version of Asterisk Stable 1.0 and zaptel/libpri my system is MDK9.2 with 1 TE410P and seems work well for now but i have a little amount of traffic (25 IN/OUT calls) i only notice this Warning.. What kind of error is? ------------------------------- Apr 20 21:28:49 WARNING[147466]: chan_zap.c:5979 zt_pri_error: PRI: !! Got reject for

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

I managed to get Asterisk working with my PBX using T1, now I am moving on to trying to make PRI work. I have my zaptel.conf and zapata.conf configured as follows: Zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone=us defaultzone=us Zapata.conf: [channels] transfer=yes immediate=yes callprogress=yes language=en context=default switchtype=national signalling=pri_net group=1

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Hi! I'm trying to use the internal LDAP provided by Samba4 to store mail domains used by SOGo. I have two sets of users. Those used by Samba and created through samba-tool and those created under some "ou" I have made up. A few days ago I was able to change the latter users passwords using "ldapadmin" (a windows LDAP client) but today I am not. When I try to change a

[please use reply-all when responding - the list does not modify the reply-to header.] > On Nov 16, 2015, at 8:24 AM, R?bert SZAKSZ <robert at szaksz.eu> wrote: > > Hello, > > I have one UPS Infosec XP Pro 2500 RM and it works with windows sw RUPS2000. > Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux). > On this linux I

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Hi, We have a Ericsson BP250 Phone system setup witht he following configuration Telco <-> Asterisk E405P <-> BP250 The system seem to work perfectly on 1.0.9 for a very long time but there is some functionality we wanted to take advantage of in the 1.2 version branch so we upgraded. Currently running Asterisk 1.2.4 Zaptel 1.2.3 (noticed 1.2.4 is out will upgrade next

Hi Charles, >----- Original Message ----- >From: "Charles Lepple" <clepple at gmail.com> >To: "R?bert SZAKSZ" <robert at szaksz.eu> >Cc: nut-upsuser at lists.alioth.debian.org >Sent: Monday, November 16, 2015 3:20:17 PM >Subject: Re: [Nut-upsuser] Contact-closure UPS > >[please use reply-all when responding - the list does not modify the

I just had the same exact problem this morning. The only thing I've done in the last couple of days is update update zaptel. I rolled back my zaptel to 2/11/04 from 3/8/04. And kept my libpri from 3/8/04. I never had this error before updated. I had other issues, but not this one. -sb -----Original Message----- From: asterisk-users-admin@lists.digium.com

Hi all, Sorry to bother you with the potentially not too bright question, but since I cannot get it to work, I'll have to ask someone.. I've got this vector: > token [1] sal skal skal bak b_r d_ gal kal l_r n_r pak p_r [13] sal sl_r sn_r spak sp_r st_r s_ bak d_ gal l_r pak [25] p_r sak sl_r sp_r t_ kal n_r s_ st_r sak kal

I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:02 WARNING[131081]: PRI:

Hi All, Greg has been a huge help getting me going with this tellabs echo can, but I'm still having some problems getting it to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable: http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it

Hi, I am running * with E100P board. At least every our I got an Error 500 message and ISDN-PRI restarts: Jan 10 12:53:02 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 12:54:27 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 13:33:01 WARNING[98311]: File chan_zap.c, Line