similar to: Newbie : i try and test to use asterisk

hi ---------modem.conf :---------- msn=240862922 incomingmsn=240866365,6365 device => /dev/ttyI2 group=1 device => /dev/ttyI1 ; ttyI3, ttyI4 ---------extensions.conf ;------- [sip] exten => _XXXXXXXXXX,1,Dial,Modem/g1:BYEXTENSION (Sjphpone) Call to : 024076xxxx result : --Executing Dial(Sip/roseau-6163","Modem/g1:BYEXTENION") in new stack -- Called g1:024076xxxx --

hi My stations are behinds a firewall, the system is windows 2000 & 98, i use sjphone asterisk is on the internet gateway where is the firewall Shorewall the system is linux debian (sid) kernel 2.4.20 j do whaton http://www.automated.it/guidetoasterisk.htm (grateful Andy) to write my sip.conf but i can't call an external sip user. (an external user can call me) i try without asterisk with

Hello, Since our server migration from OES1 (rsync-3.0.2-2.1) to OES2 (rsync-3.0.6-3.1), rsync backup do not work anymore. Here is some explanation : With a full verbose mode on the source server : rsync: writefd_unbuffered failed to write 631 bytes to socket [sender]: Broken pipe (32) rsync: connection unexpectedly closed (786 bytes received so far) [sender] _exit_cleanup(code=12,

hello to asterisk start WARNING {98311] : File chan_sip.c, line 388 (retrans_pkt) : Maximum retries exceeded on call xxxxxxx...xxxxxxxxxx@192.168.0.1 for seqno 102 (Request) with a call from x-lite 38113@fwd.pulver.com WARNING {98311] : File chan_sip.c, line 2002 (__transmit_response): Unable to determine sequence number from '' and x-lite hang up the second warning is new since morning

hello Newbie, i try examples to understand "asterisk". I have a pb with your macro macro-record-cleanup. the progress of the macro stops if the macro is execute on a hangup. I try many other configure with exchange of rules but it seems me that there is no execute after the first (or second) instruction after an hangup. i use two "sip" phones "x-lite", one with a

Hi all, I'm working on an implementation of VoIP en Linux. I have a Debian Suse (*.*.*.173) with an * and a X-lite client and a Red Hat 9.0 (*.*.*.172) with another softphone X-lite. Both of the softphones are registering and appear in the peers (sip show peers) with the good parameters of address and port. If I try to make a call, * receive the INVITE request and send a 404 NOT FOUND answer.

https://bugs.freedesktop.org/show_bug.cgi?id=98709 Bug ID: 98709 Summary: [NV50] clocksource: timekeeping watchdog on CPU2: Marking clocksource 'tsc' as unstable because the skew is too large Product: Mesa Version: 12.0 Hardware: x86-64 (AMD64) OS: Linux (All) Status:

I am getting this Error on my Asterisk. How to solve it ? "ERROR[2654]: chan_sip.c:11355 handle_request: Missing Cseq. Dropping this SIP message, it's incomplete." -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090115/cb953962/attachment.htm

I have a problem in ssh login without password Systems: vmware-centos 5.2: 192.168.0.4 vista copssh: 192.168.0.2 [192.168.0.4 $] ssh-keygen -t dsa [192.168.0.4 $] scp -p id_dsa.pub tester at 192.168.0.2:.ssh [192.168.0.2 $] cat .ssh/id_dsa.pub >> .ssh/authorized_keys [192.168.0.2 $] chmod 700 .ssh [192.168.0.2 $] chmod 600 .ssh/authorized_keys [192.168.0.4 $] ssh id at 192.168.0.2

I feel I'm on the verge of setting up a pbx for handling internal calls only... The last problem - I think - I've run into is w/ the phone registration running asterisk -vvvc I get a bunch of messages looking like so Apr 6 14:46:05 NOTICE[1116957488]: chan_sip.c:5623 handle_request: Registration from 'sip:2001@192.168.22.254' failed for '192.168.22.1' Apr 6

Hi, I have Mandrake 10.0 gateway with internet via. ppp0. Also, another machine 192.168.0.4 is always connected to net via. a dial-up modem. Now I want to allow a machine (192.168.0.2) in my LAN to access net through 192.168.0.4. So according to lartc howto I did, # echo 200 John >> /etc/iproute2/rt_tables # ip rule add from 192.168.0.2 table John # ip route add default via 192.168.0.4 dev

Hi I have using a Bering (LRP) box with shorewall, and I must enable IP masquedare only a few hosts on my network. I want to enable only masquerade from 192.168.0.2 to 192.168.0.25. What I must do ? I known that I have to configure the /etc/shorewall/masq file, but I don''t known how. Thanks in advance.

Dear sir or madam, i've got a problem connecting a Linux machine with a Windows Me internet and file share. This problem i didn't got it with SuSE 7.2. From SuSE told me that have been some changes on SAMBA from 7.2 to 7.3. I'd like to ask you if some one could help me. I am looking forward for your anwser. Yours faithfuly, Bill Giannakopoulos P.S. I can see the Win PCs but i

On 07/05/2019 01:55 PM, Rowland penny via samba wrote: > I currently run tinydns and dnscache on my proxy machine.? I was > hoping to keep that going.? I have a Windows Server2004 doing DC work > right now.? Need to update that. >> >> -- >> Bob Wooldridge >> > You can run a caching nameserver that forwards your AD dns zones to > your AD DC, but you can

Hi everyone! I have a little problem here. First let explain my network topology I have a 192.168.0.0/24 network, with win98 workstations, a NT serving domain and another NT as a WINS server. 192.168.0.3 - NT / WINS 192.168.0.6 - NT / DOMAIN 192.168.0.1 - Internet gateway 192.168.0.2 - Wireless AP 200 that connects to a linux gw ==--==-=-=-==-= AIR :) -- --- == --==--=-- =-=- 192.168.0.4 -

Ok, and then? in file smb.conf.192.168.0.1 [global] ... bind interfase only = yes interfaces = eth0 ... [FOR_ALL] ... in file smb.conf.192.168.0.2 [global] ... bind interfase only = yes interfaces = eth1 ... [ADMINS] ... Does this configuration works? Is this a good solution? i really don't know, so what's the global thinking about this. -- Information Systems

I'm trying to figure out how I can have my lan browser display computer names instead of IP Addresses. I think the ip addresses are generated by my router since if I add a new computer, the ip addresses will be different for each computer. anyway let me give you the specs first. Running Samba 2.2.8a-1 on Red Hat 7.3. I have not set up WINS or DNS at all. I have set up lisarc to use

hi all, i know a whole lot more about MS windows networking than i did this morning (but it still feels like i don't know much). the linux samba server is a local, master and preferred browse master. it's also a WINS server. linux's IP address is 192.168.0.2. the win2k machine is 192.168.0.4. the goal is to browse linux's filesystem from win2k's "computers near

Hi All, I am new to tc so please forgive me. I have read as much documentation as I can get my hands on, but I still have problems with getting the rules right. Here is my scenario: Internet Cafe/Office 4 Internet Cafe Terminals 3 Office Terminals Leased Line connectivity at 64Kbps. What I would like to have: All Cafe terminals have priority to the internet over the office machines. Each

Hello, I'm working on project that requires my linux application to access (read/write) via samba a single partition that is bigger than 2TB. I would like to know if the latest versions of the linux samba client support this kind of partition and what the limit accually is and what are the specific requirements. Thanks for any help. -- Thibaud Tourneur DBee