similar to: register with outbound proxy from behind nat for freeworlddialup etc.

Hi, after reading about it on the list I decided to set up a Free World Dialup account. For those of you who don't know, that is a sip proxy where you and your friends can singn up free and then you can just connect to it with any sip client and call anybody that is registered for free. Pretty much like iaxtel (I belive that was the name of it) for the iax protocol. It even supports clients

Same thing. It will make sense to try Register => <FWDnum>@fwd.pulver.com:<FWDpass>@fwdnat.pulver.com:5082 but in that case Asterisk sends REGISTER sip:fwdnat.pulver.com SIP/2.0 which is not right. It should be sip:fwd.pulver.com but sent thru fwdnat.pulver.com:5082 BR Borut -----Original Message----- Subject: Re: [Asterisk-Users] Using Asterisk with FWD through NAT From:

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

Hi All, Is there any way to connect (register, initiate and receive calls) with Asterisk to FWD through NAT? Since I own my router port forwarding is not a problem. I tried with Register => <FWDnum>@fwd.pulver.com:<FWDpass>@fwd.pulver.com but since Asterisk still use internal IP in some SIP fields I got "479 We don't accept private IP contacts. Please set your external

I've been having issues getting FWD to work. I posted this same Q to the FWD forum (no responses yet), but I was hoping someone here had some insight: http://yabb.pulver.com/cgi-bin/yabb/YaBB.cgi?board=news;action=display;num=1072263468;start=0#0 I just signed up for an FWD account (I know I had one before, but I lost it.. :) I've got it running through Asterisk - all working fine

Hi all, I have seen a lot of messages in the last time about * If you put a section in sip.conf as: > [fwd1] > reinvite=no > canreinvite=no > nat=yes > type=friend > secret=dunk13 > username=33537 > host=fwd.pulver.com > ;host=192.246.69.247 > context=inbound this does make sense??? What is [fwd1]? For me it means that a SIP user with the name fwd1 is defined in

Someone said something about FWD registrations requiring the extended syntax shortly, like this: register => 12345@fwd.pulver.com:somepassword@fwd.pulver.com/12345 At the moment, using the extended syntax doesn't work - I get authorization errors. So stick with the old syntax: register => 12345:somepassword@fwd.pulver.com/12345 JT

I'm trying to understand IAX and whether or not it would solve my difficulties: 'The primary goals for IAX were to minimize bandwidth used in media transmissions, with particular attention drawn to control and individual voice calls, and to provide native support for NAT (Network Address Translation) transparency. Another goal is to be easy to use behind firewalls.'

I'm new to Asterisk and have installed it on OS X. I am trying to use an X-Lite softphone to connect through Asterisk to FreeWorld Dialup and am not having any luck. I have looked at several settings pages at voip-info.com but have had no luck. I am on a school network which I assume has some security but the particulars are unknown as they are not very helpful. It is necessary to

I have successfully configured asterisk to make outgoing calls over FWD, but cannot receive incoming calls. The console shows no messages, even though an XTEN client on the same network has no problems receiving incoming calls. This is the relevant part of sip.conf [general] ..... register => 688426:xxxxxxxx@fwd.pulver.com/6000 [fwd.pulver.com] type=friend username=688426 fromuser=688426

hi My stations are behinds a firewall, the system is windows 2000 & 98, i use sjphone asterisk is on the internet gateway where is the firewall Shorewall the system is linux debian (sid) kernel 2.4.20 j do whaton http://www.automated.it/guidetoasterisk.htm (grateful Andy) to write my sip.conf but i can't call an external sip user. (an external user can call me) i try without asterisk with

Can multiple FWD accounts be registered? I have the following output in my sip.conf file: register=74928:xxx@fwd.pulver.com/74928 register=75160:xxx@fwd.pulver.com/75160 register=74573:xxx@fwd.pulver.com/74573 [fwd-74928] type=friend secret=xxx username=74928 host=fwd.pulver.com [fwd-75160] type=friend secret=xxx username=75160 host=fwd.pulver.com [fwd-74573] type=friend secret=xxx

Could someone please point me to the proper url to register for a fwd acount and get a fwd number. I couldn't find it at www.freeworlddialup.com or fwd.pulver.com Thanks, -Galt -- "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." Benjamin Franklin

Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial("SIP/Phone4-e85b", "SIP/612@fwd.pulver.com|90|Ttr") in new stack -- Called 612@fwd.pulver.com -- Got SIP response 500 "I'm terribly sorry, server error occured (1/SL)"

Hi, I have an FWD account and it's configured in asterisk. I can be called by people using FWD, but I cannot make FWD calls myself. Every number dialed with a 8 prefix goes to FWD, if for example I call the echo servie I get this: Connected to Asterisk 1.2.13 currently running on asterisk (pid = 2865) Verbosity is at least 35 -- Executing SetCallerID("SIP/timothy-08224f08",

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

I'v a sip client and a sip trunk to FWD: [general] port=5060 context=default tos=reliability disallow=all allow=ulaw careinvite=no [freeworlddialup] context=default type=friend username=MYUSERNAME secret=MYPASSWORD host=fwd.pulver.com [igor] type=friend callerid="Me" host=dynamic dtmfmode=rfc2833 careinvite=no When i try to call a FWD number from SIP client i obtain a lot of

Hi, Over the past weeks, I've configured and fine-tuned a bells-and-whistles desktop based on CentOS 7 and KDE, which I've documented in detail on my blog: * https://www.microlinux.fr/poste-de-travail-entreprise-centos-7-kde/ So far I have one single thing that's not working. It's a little detail, but I'm sure it will come bite me, since I know some of my users need this

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

I have recently started experimenting with Asterisk. I am running the system the other side of the a NAT router and trying to connect to FWD. I have opened UDP ports and have configured sip.conf to handle NAT. The problem: I can call from the FWD phone and the extension on Asterisk rings and there is two way sound so no problem. Now if in the extension.conf file I have, exten =>