similar to: centos on 64M 350Mhz pentimum II

Hi All, I a working on configuring a not-quite minimal installation of CentOS 6.2. I tried doing the "minimal" installation available with the installer, but it's a bit too minimal to be useful. So I'm cutting down from a less minimal starting place. I'm pretty familiar with 5.x, but what I'm finding in 6.2 is a lot of new stuff, and a lot of odd behavior. For example,

I have been trying all sorts of things to get this working. nfsv4 works fine if I just use the nfs-v3 form of export i.e. /nfs4exports 192.168.230.237/24(ro,fsid=0,sync,insecure,no_root_squash,no_subtree_check,squash_uids=0-99) /nfs4exports/NDG 192.168.230.237/24(rw,insecure,no_subtree_check,nohide,sync,no_root_squash,squash_uids=0-99) but this is inherently open to all on this machine. so then

Hello all, I have been doing some searching for information about disabling services within a CentOS 5.5 install. I have found a few different opinions, and wanted to ask for some feedback. First off, the system is running a LAMP stack to serve a web application. It will only be doing email to send occasional messages out (sent via the application only). It will not be receiving email for any

I run chkrootkit daily. For the first time I've got reports of a problem - Checking `bindshell'... INFECTED (PORTS: 1008) The page http://fatpenguinblog.com/scott-rippee/checking-bindshell-infected- ports-1008/ suggests that this might be a false positive, so I ran 'netstat - tanup' but unlike the report, it wasn't famd on the port. It was tcp 0 0 0.0.0.0:1008

Greetings I did another quick server install on an old rackmount Compaq Proliant 1850R with hardware RAID5 today. would someone please shed some of their experience and light on how they deal with deleting or keeping the default configs on these items please when i do a chkconfig --list | grep :on | more nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off readahead

So, I'm seeing XMMS behave mighty strangely here. decode_example piped into a command line player manages to playback realtime on my p233 somewhat easily. XMMS (with the Vorbis plugin) utterly pegs the CPU and stutters badly. So, I started playing. Playing back mp3, xmms stutters badly (mp123 and xaudio play back realtime without difficulty). Playing back straight wav files, xmms also

Hi all, I have a user who is reporting excessive amounts of lost characters when using SYSLINUX (PXELINUX actually) over a serial port at 38400 bps. What is somewhat bizarre is that he has a very high quality server with a Cyclades board, and yet he's losing characters in the PXELINUX->server direction. Has anyone else seen this? Thanks, -hpa

Hello, I would like to bring up the topic of possibly including partial authentication functionality into OpneSSH again - it was discussed a few weeks ago. I believe that implementing auth vectors was suggested as a way to achieve this. The reasoning behind the need for partial auth is that there are cases when multiple methods of authentication are required for the user to be successfully

Hi, If this is a redundant post I apologize. I am running 2.4.20 on what has been a very stable Athlon machine for months, tried to move a 2 GB file from an ext2 partition to an ext3 and kjournald crashed. Here are the last reminants of my shell scrollback: [*ROOT* mofo /mnt/sda1/mysql/fd 641 ] ll oldmail/ total 2363288 -rw-rw---- 1 mysql mysql 2147483647 Jan 23 18:04 maillog.MYD

Hi, I''m trying to configure QoS on my linux in the following manner: I have a main link with 64K, so I divided it in 3 classes of 18K, 14K and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is

Hi list!: A question about the refinement of the configuration: Always when I start a domain kudzu (hardware detection daemon) ask me for remove hardware. I answer yes, but in the next boot kudzu ask again. I''m guessing that kudzu is asking for remove the «real» drivers that are inside the domU because the domainU was created copying the dom0 system in the domU. How can I deal with

Yesterday I started using CBQ in production on our firewall over an IMQ device, but since then I get a lot of messages in my syslog like below: On Wednesday 13 November 2002 09:07, root@ism.nl wrote: > Nov 13 08:01:36 firewall kernel: NET: 1 messages suppressed. > Nov 13 08:12:36 firewall kernel: NET: 1 messages suppressed. > Nov 13 08:18:36 firewall kernel: NET: 1 messages

Hi, Maybe a bit off topic for this list, bt anyway. I have received several feature requests for DarkIce to support downsampling of the audio input before passing it to lame or ogg vorbis. For example the audio read from the soundcard would be 44.1kHz, and lame would get it at 22.05kHz. I figure two ways of doing this: 1. For lame, one can specify the input and the desired mp3 sampling rate,

So I have a CentOS 5 machine, which I recently did a 'yum update' on. Everything went fine, but I rebooted as a precaution (just to confront any problems which might arise the first time after an update). And sure enough, when the machine came back up, the network didn't work. Luckilly, someone said (and I quote) 'mv /etc/sysconfig/networking-scripts/ifcfg-eth0.bak

Redhat has a 'Hardware Discovery Utility' called Kudzu. When I change cards, kudzu pops up and ask to remove/config the card. Most of the time kudzu has trouble recognizing the Digium Zaptel cards and calls them something wrong, like calling the TDM card a network card. I'm having a devil of a time getting 3 TE410P cards to come up with all green lights. For example one or two cards

I'm running a CentOS 4.4 VM on a Windows XP host with VMware Server, and have the problem that my clock runs too slow (it happens in VMware Workstation as well). It loses between 30 and 45 seconds every minute! This is a known problem and can be fixed by adding "nosmp noapic nolapic" to the boot command according to VMware tech note ID 1420. However, despite adding these

Hi My card is working, but when I reboot the machine, most of the times it is not working, I get "ztcfg: ZT_CHANCONFIG failed on channel 1: No such device or address (6)" To make it work again I have to shut down, remove the card, reboot so kudzu will remove the config. shut down again, put the card back in, reboot, now kudzu see it, I choose "Ignore" and then it's

Hello I got a nice problem, i don''t know if the i''m put my question a the right place, but anyway.... I have 3 server LINUX with LVS (linux virtual server) I had to recompile my kernel cuz it was not supporting LVS. Since there, everything was going right. Then I''ve change the hard drive of the primairy LVS to an other computer, now i want KUDZU to detect my harware,

Hello, I have an IBM Netvista and since kernel 2.6.9-34.0.2, I have not been able to upgrade to the latest kernel. If I do, in about 8 hours, the system becomes sluggish almost unresponsive. Currently I am running 4.6 but with the kernel mentioned above. I think I may have figured out the problem. It seems when I reboot with the new kernel, kudzu runs and wants to configure a different driver

I have newly installed a RedHat 4.0 EL rebuild. The install was done without the ISDN card present. After disabling kudzu and haldaemon I inserted the card. Stil that *(&$^&%$(&$^!!!!!! kudzu shit modified my config and is loading hisax, crc_ccit and isn modules. Even worse, they do not appear in /etc/modprobe.conf which means that that f*cking kudzu added the modules to initrd.