similar to: Cisco 1760 config examples - SIP

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

I have several phones running Cisco's 6.0 SIP software release at this time. Two of the phones have not shown any abnormal behaviors, but one of them has an unsettling propensity to lock up after several hours, where the softkey labels disappear and the phone stops registering, requiring the standard *-6-settings reboot sequence. Otherwise, the phone seems to work OK except for a slight

Bug in the register= code; see details below from the developer of "ser" (SIP Express Router) Apparently, ACKs don't need to be sent on OK's to REGISTERs. Plus, malformed data somewhere... no details on that, though. JT >Date: Sun, 23 Feb 2003 23:54:07 +0100 >To: John Todd <jtodd at loligo.com> >From: Jiri Kuthan <jiri at iptel.org> >Subject: Re:

Interesting notes on the 79xx series. The 7920 is the wireless phone; not mentioned here. For a more complete guide to Cisco's phones, see: http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheets_list.html The 7902 is the "very inexpensive" Cisco phone, and it looks like it will be SCCP (Skinny) only. Twiddling my thumbs here waiting for the chan_sccp to

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small

John, I spoke with Level(3) last week regarding SIP termination. They quoted $0.01/minute, with an 11 Million Minute / Month minimum. Ugh! -dg -------------------------------------------------------------- Darnell Gadberry President binaryMedia darnell AT binmedia DOT com ------------ Date: Fri, 19 Dec 2003 21:12:22 -0500 To: asterisk-users@lists.digium.com From: John Todd

Every half year or so, I probably will repost this list, adding and subtracting as the community makes advances (or ignores what isn't required.) >Date: Thu, 9 Oct 2003 04:51:23 -0400 >To: asterisk-users-lists.digium.com >From: John Todd <jtodd@loligo.com> >Subject: Sasquatch, the Loch Ness Monster, UFOs and... > >Mythical Asterisk Creatures, oft-discussed, rarely

Sipura does include STUN as an option. It has for quite some time. We are using it with all of our Sipuras behind NAT'd gateways and it works great! Try upgrading to the latest Sipura firmware rev. Darren Nay > -----Original Message----- > From: John Todd [mailto:jtodd@loligo.com] > Sent: Saturday, May 22, 2004 1:57 PM > To: asterisk-users@lists.digium.com > Subject:

I have asterisk 1.6.2.11 talking to a cisco 1760 running ipvoicek9-mz.124-25b. whenever a call goes through the 1760's FXO or FXS (in or out) there is a 915 second maximum call time due to asterisk hanging up the call because of a "critical packet" being missed. I read doc/sip-retransmit.txt and I don't see anything there that is helpful to my situation - the asterisk box is

Hello all - Second-to-last notice to collect RSVP's for interested parties for the Asterisk Birds of a Feather dinner/beer meeting. There are five people signed up for this at the moment. Looks like it's going to be the 23rd of September, since that fits well with the VON conference schedule. Please email me directly for details. JT >Date: Thu, 21 Aug 2003 01:52:52 -0700

-----Original Message----- From: Adams, Gavin Sent: Monday, August 04, 2003 6:10 PM To: 'asterisk-users@lists.digium.com' Subject: Cisco 7960, SIP, NAT, Voicemal Hey all, I've got a couple 79xx phones working peer-to-peer and am now trying to work on the voice mail. In extensions.conf: [ATL] exten => 4001,1,Dial(SIP/gadams)|10 exten => 4001,2,Voicemail,u4001 exten =>

I've been involved with getting better data for running Asterisk on the Amazon EC2 cloud computing system. Here are some calculations I've made on costs based on current published prices on Amazon's system. Feel free to tell me that I'm wrong with these calculations - but be specific if you find any problems, as I suspect others may glom onto these figures as gospel and

Anybody on the list who implemented Cisco ATA + * + Cisco 2600? I cannot get my calls from ATA to terminate to the Cisco gateway via *. I am not sure if it is my hardware problem. I'm getting the following "codec negotiation problem" from Cisco. 23:39:08: Unexpected VoIPCodec Type :g729br8 23:39:08: Unexpected VoIPCodec Type :gsmefr I appreciate any help I can get. Thanks.

Hi i am search a sample config (for asterisk and for cisco) for connect a cisco 1760 with a FXO card to my asterisk. Thanks for your help Jerome

I'm wondering if there is any command-line interface available for working with values stored in astdb. Of course, I can run "asterisk -rx "database show" " or other commands like that, but I was hoping for a local command that would allow manipulation or output in some other form. Is astdb in a standard db format? JT

This is a fairly large list of hardware phones, features, and URLs, with some vendors I've never heard of before on it. I suspect that any phone that doesn't explicitly say "SIP" is an H.323 phone. http://www.tmcnet.com/it/0403/0403sg.htm#sidebar2 JT

This is not specifically Asterisk-related, but I think that sometimes a "pre-emptive" clue is a good thing. Viking Electronics (http://www.vikingelectronics.com/) has some neat widgets that attach to phone lines, which I'm sure many of the people on this list would find at least somewhat useful in conjunction with their Asterisk systems. Many of the widgets can be replaced with

Hi, There is any simple way to have external access to the Asterisk database? I want to be able to edit a specific family only, which is a phonebook. Thanks, Dan

The soundfiles I submitted earlier today have been cleaned up, and added to the Digium CVS server in a more formal manner. Also, some of the really bad formatting in my .txt description file has been rectified. All of the sounds on my website are now on the Digium site, and I will be submitting future changes via patches to Digium for additional sounds. Ideas welcome for more text; I may

I ran across this URL the other day: http://www.advancedvoip.com/ It seems that they have a low-priced solution for billing, which seems to have some interesting features (at least, via the canned demo they provide.) It handles CDRs and also (sorry, Jeremy) Radius, and seems to have a lot of features. I'll be calling them later today to discuss their product, if only out of curiosity