similar to: libpri and zap lib

Hi, I have an asterisk installation with 2 E1 cards Software version is Asterisk 1.2.6 Libpri 1.2.2 Zaptel 1.2.5 I'm having problem with fax transmission, let me explain better my setup: My fist TE110P E1 card is connected to the telco line the second TE110P E1 one to an Nexspan PBX so the server is basically sitting between the line, and the pbx. every call coming from the line is

Hi all, inside my * is a E400P. The machine is a PII 400Mhz with 256MB Ram. OS is Debian woody. * is the newest cvs co. I have written a little callgen script which make outgoing calls through my *: #! /bin/sh set -e n=$1 # Nummer anz=$2 # Anzhal der Versuche anz2=$3 # Kan?le sle=$4 # Timeout bis zum n?chsten Versuch if [ -z $4 ]; then sle=0 fi s=1

Still not working, but I took the latest patch and: - rebased it against libnbd 1.0 - fixed it so it handles new args and cbargs The generator now runs without warnings. This patch doesn't handle optargs at all. In C these are converted to non-optional parameter. Rust doesn't (AFAIK) have optional or labelled arguments unfortunately. Rich.

Hi all, I have to asterisk-1.0.9BRIstuffed-0.2.0n boxes each equipped with a TE410P. Box A is connected with pri1 to the PSTN. Box B is connected with pri1 (cpe) to the Box A at pri2 (net). Now I want Box B to dial out to the PSTN tunneled thru Box A and have it get all ISDN indications in case of call failure, eg. unallocated destination number etc. But currently Box B always gets only

Hi all, I replaced a TE410P Rev C 1st Generation Firmware with a TE411P without any cfg changes (zaptel/zapata). As a result Asterisk crashes on outbound from PRI4 going to PRI1 calls: Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1 Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1

according to the wiki, I should be able to do this: exten => _9./3003,1,Set(CALLERID(number)=2814444443) exten => _9./3004,n,Set(CALLERID(number)=2814444444) exten => _9./3005,n,Set(CALLERID(number)=2814444445) exten => _9./3006,n,Set(CALLERID(number)=2814444446) exten => _9.,n,Dial(SIP/${EXTEN:1}@mycarrier,30,wt) and have the correct calleridnum's set for each extension based

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

While most cell phones are fine, some cell phones don't seem to produce DTMF digits that Asterisk/Zapata will detect. One of our salespeople has an AT&T model that never gets any digits through. Is there a known solution? I understand, of course, that with cell phones the DTMF tones are actually created at the base, and that pressing the key longer usually does not result in longer

Hello ! I 've some questions how bridging of ISDN calls is done. Assume an asterisk system with a TE405 card equipped. (PRI1 - PRI4) An incoming ISDN call on PRI1 is transfered back to PRI3. Unless there is DTMF detection or other things involved, the bridging is done without Asterisk. Does this card have a some sort of cross connection ? Does the PCM leave the card ? Or is there some DMA

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Hello, I installed Asterisk 1.6.2.17.3 ( latest as of yesterday ) and had multiple problems with DTMF. I have two machines, we'll call them asterisk and asterisk-pri. Asterisk does IVR and asterisk-pri has a PRI card in it and connects to the PSTN. The two servers communicate via SIP with RFC2833. I setup logger.conf on both machines to display DTMF to the console. Both are built from

Hi We interfaced our ASCOTEL PBX to Asterisk. by EuroISDN PRI , DSS1 It works fine on channels 1- 15, but on 17-31 the miststood each other. Asterisk speaks in Timeslots, the PBX in B-channels The signalling is ok, but the bridging is shifted. The first incoming connection is bridged to "nirwana" also no indication is hearable, calling a second internal subcribes bridges them to the

Hello! I have a special problem with a zaptel PRI card (E100P) with Asterisk STABLE CVS (zaptel and libpri also from stable branch). I use iaxComm softphone for outgoing calls (ulaw currently). Calls are going out through PRI. After about 5-6 calls, when the 7th call arrives, the voice volume on the called party's side is decreased, so they can't hear much (the caller's volume kept

I've been having trouble matching variable extensions on a zap channel (an E1 line). Doing it the extensions.conf way: [pri1] ; Match 8078078- calls include => m807nat include => m807mob include => m807oth [m807nat] exten => _80780782XXXXXXXXX,1,StripMSD(7) exten => _2XXXXXXXXX,1,SetVar,clidest=${EXTEN} exten => _2XXXXXXXXX,2,Goto(cli,s,1) [m807mob] exten =>

This is just a basic ugly support, not meant to be pushed (at least for now). There is quite a lot missing, but there is an example which shows that it really works. And valgrind reports that all allocations were freed. The way the code is generated is also not nice, I wish there was more code actually written in some files and not generated by the generator (as much hard-coded static strings as

Hi Tim and Rowland, thanks for Your support! I was thinking about e.g. Python 2.7.15 compatibility (as newer Samba versions require Python3), but You are right, here in DB can be problem - first Samba AD DC was created by migrating Samba3 NT4 domain to Samba4 AD cca week ago (using 'samba-tool domain classicupgrade ...', according to Samba Wiki): On Tue, 26 Mar 2019 10:14:02 +1300 Tim

Hi All, I have configure my Asterisk as follow (using Asterisk@home): [zaptel.conf] span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 loadzone = uk defaultzone=uk [zapata.conf] [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local internationalprefix=00 nationalprefix=0 usecallingpres=yes busydetect=no ; not need on pri callprogress=no ; was yes but wiki says experimatley

Hello, I am looking to buy a large number of TE410P cards for a big international project. I have studied the documentation and zaptel.conf and as result I have the following questions: 1. How do you switch the card from ISDN PRI TE to NT? This means from being configured as User Equipment (the PABX) to be Network Equipment (the Exchange). 2. How do you configure the card for E1 or T1? 3. In

Hi, I am trying to use Asterisk cmd ZapRAS (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ZapRAS), I pathed the ppp daemon ftp://ftp.digium.com/pub/zaptel/misc/, but when I try to use it, I obtain the following error: Connected to Asterisk 1.2.4 currently running on TSU-R1 (pid = 7242) Verbosity was 0 and is now 44 -- Accepting call from '123456789' to

First of all sorry for the little offtopic post :-) For one of our customers i need to make a vpn between the Netherlands and Hungary. Over this vpn two * machines are gonna talk IAX and employees in Hungary are gonna use the Exchange server located in the Netherlands. So far no problem... The problem: I'm from in the Netherlands and don't understand the .hu websites :-( First question: