similar to: Wildcard E100P and E400P

hi, we are experiecing the following probem, if anybody have come across such a problem or a solution to this please let us know. our set up is, an Asterisk server equipped with, 4 port station interface card ,single port fxo card and several soft sip phones we have found problems with the following scenarios, outside caller (calling through fxo interface) <------------------------------>

hi, Can anybody suggest me a good, reliable, robust, SIP supported hardware IP phone? Surajee -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030906/ed1d46cf/attachment.htm

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

hi, I have a problem in call time out, An ISDN PRI E1 from PSTN and another ISDN PRI E1 from a Nortel PBX is conneted to my server. But when i do a Dialout(from both E1s)the calls do not timeout. For ex. Dial(Zap/g4/123456|20|t) suppose other side is ringing and is not answering. even after 20 seconds, call doesn't get timeout pls gv me a solutions.. its really urgent.. Surajee

<P>hi everyone,</P> <P>I know this issue has been raised many times before, i think still the problem remains. When a call is made through a Zap channel, whether it is actually made or not (irrespective of whether, engaged, busy, or actually answered), asterisk logs it in CDRs as a call made. This makes it impossible to do an accurate billing. Has anybody found a way to overcome

hi All, We are working on Soft-PBX using Asterisk. This relates to CALL TRANSFERRING aspects of Asterisk. We were able to do one type of call transfering, ie, the called person can transfer the original call to another person. but we were unable to do the other, that is, call initiator him/her self couldn't transfer the call. Eventhough the documentation for Dial application intructs to

hi, This question is about DBPut and DBGet, Can i put about 1000 keys in a single family, (only once for the lifetime) for ex. exten => _X.,5,DBput(family/key1=${val}) ... exten => _X.,5,DBput(family/key1000=${val}) like above and if i later retrieve it, randomely, with inbound calls, will it affect performance? Surajee -------------- next part -------------- An HTML

hi, can we have arrays in contexts? i tried like this, but didn't work :-( declaration myarray[0]=192.168.3.4 myarray[1]=192.168.3.1 usage myvalue = ${myarray[${myval}]} pls tell a way to do this Thanx a lot -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030521/f8b61c89/attachment.htm

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Hi, Is this card the same as the T410P, after all, it's made by Digium. There's one prior reference on the mailint list[1] but it didn't answer the question. There was also an SS7 status report[2] last June but it's doesn't seem to have lead anywhere either. There was post saying an SS7 release was immenent last September[3], but then silence. Any info anyone would like to

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

We've changed E1 providers and I'm trying to reconfigure an E400P to make it work with the new lines. They're supposedly "standard" EuroISDN lines (in the UK). I'm initially just trying to get a single line up. I have the following in /etc/zaptel.conf: span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone=uk defaultzone=uk The LED on the back

A brandly new E400P 128 channel PRI, you can find more information on the Digium's site. The card was not used before, I sell it cause our company just don't need, we use Cisco AS5300. I can offer you the PCI PRI at $940 if bought in the next 2 days, I can send it to you via FedEx or DHL express. Please email me for more details! Regards, Kalin ----------------------------- IPPN Networks

<P>hi,</P> <P>Can anybody pls tell me how to activate loggin CDR on mysql db. I tried&nbsp;editing the /etc/asterisk/cdr_mysql.conf file and recompiling asterisk, it didn't work. Normal loggin on Master.csv file works fine.</P> <P>Thank you inadvance,</P> <P>Surajee</P> <P>&nbsp;</P><br> --------------This mail sent

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it.

Hi, I came back from a quiet weekend today and found my E400P box to have gone astray. Asterisk is loaded from inittab, and started crashing and reloading a couple of thousands of times, each time notifying my monitoring service :-P I remember there would be issues on old cvs stuff since the crash at digium so I made a clean checkout just now. Here is what happens when I load manually:

Hi, Can someone send me a sample on how to get an E400P working with ISDN PRI signaling? What conf. files must I edit? thanks in advance Eduardo