similar to: Two Rings

If anyone is interested in X100P Cards, I have quite a few brand new ones. Never been opened. $55.00 each, and I'll include ground shipping anywhere in the U.S. If you want one or more, email me off list at bbawkon@malibutech.com And since the discussion has been raging, if you are looking for support, you should buy a new one from Digium. These are sold as-is, (although I will guarantee

We were just testing forwarding one of our numbers to a VoIP CLEC and ran into an issue that we've seen before but never figured out the cause of. It seems if you call us and immediately hang up - or if the call is forwarded by Verizon (which stills rings about ? of one time) the Zhone detects the ring and answers the call.. The Zhone however DOESN"T detect that it's no longer

Hi, My PBX/key system failed when building power was switched off and then back on. The service rep says the PBX unit is so old that it is not repairable. The unit has 8 incoming POTS lines and 12 multiline sets. There are voice mailboxes on each line. Switching to Qwest's Centrex system would cost about $3800/yr. My 8 business lines now cost $3320/yr, so the Centrex increment would

I live in New Brunswick Canada. The phone company is Aliant. When you set up business service here, you can go with either analog or digital lines. This isn't a T1 or ISDN. They are talking individual lines direct to handsets that they provide. They offer the digital option with even very small ( 2 - 4) number of lines. What technology could this be? Is there any way to connect such a

I am new to Asterisk. I am trying to ascertain the hardware setup (and associated cost) I would need. The documentation in the wiki (and elsewhere) is extensive but I am somewhat lost in product model numbers. Hence I need an initial recommandation to work on. 15 incoming lines, 25 employees). Initial scenario is to use * as a plain old PBX. I need voicemail, ability to transfer calls, ... I

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -

Hi, being a total newbie in shellscripting and similar stuff, I am suffering from a brain freeze around the following problem: * I need to print (or transfer otherwise) to a WinNT box; * the files are send from inside a shellscript; * the script gets the filename on the commandline when started; * so the only knows it works on "$1"; * the problem is, that the original filename needs to

I am looking into supporting around 20 SIP clients (ATAs, IP softphones, etc) distributed in around 10 different end points (in South America). For the most part they all have narrow band connections 64kpbs, 128 at most and I?d like to use g729 all around (don?t have too many alternatives) To start with, I will have one * with no gateway to the PSTN and eventually a few * boxes with termination

I haven't dealt with Centrex for a long time, and one of my customers is being courted heavily by a Sprint salesperson. Am I not correct in assuming that each "line" of Centrex corresponds to an "extension" in the PBX world? This site has 2 POTS lines and 5 extensions, and they told me that for the same thing they're paying right now (~$40/POTS line) they will be

Hey guys, I've had a working Asterisk setup going for a while now, but am having problems with the Zhone Zplex 10b thinking that during ringing, an extension has answered the call when infact it hasn't. This only seems to happen on some of the ports and doesn't appear to be specific to the handset. Does anyone have any suggestions as to how I could go about fixing this (aside from

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

Hey all, Any suggestions on how to estimate how much data rsync would synchronize on average in a given installation? Assume that a full rsync has already run and the only data being updated is just the daily diffs. Thanks, noam Noam Birnbaum http://maccentricsolutions.com/ 877.luv.macs x89 ð Apple Certified Technical Coordinator ð Apple Certified Help Desk Specialist --------------

I've just received a brand new zhone z-plex 10b. At first, I was able to login using the default (admin/zhone), and started exploring with the configuration, trying to set it up to work with the TE410P. Somehow the admin password was changed, but I don't know what it is anymore. So now I'm stuck at the login prompt, and can't get back to the CLI.... Is there a way to reset the

Greetings, I am running Asterisk with a T100P and a Zhone channel bank for over a month now. For the most part it works fine but from time to time (about once a week) the system will not let go of a line and will play the greeting over and over. Anyone calling gets a busy signal. If I reset Asterisk everything works fine. Has anyone seen this problem before and fixed it? If so what did you do?

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

Hi 2 all. I've a nice issue my * system. I have: asterisk latest cvs T100P + Zhone cb (3fxo+10fxs used) Diva Server 4BRI running Capi a bunch of pots and sip phones The whole system is running good (thanks to capigod and Bic. for the help with the Eicon Diva), but there's a very strange issue when calls arrive on the Diva and then bridged to the pots on the channel bank: the voice is not

I notice most things say to open ports 10000-20000 for UDP for SIP, however from time to time this range isn't where Asterisk is opening the ports: We're at xxx.xxx.xxx.xxx port 8542 Answering with capability 0x2(GSM) Answering with capability 0x4(ULAW) Answering with capability 0x8(ALAW) This call has no audio, presumably because port 8542 is firewalled in the iptables on the server.

I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has been working fine for me now for a while. These have been pulled out of a working Asterisk installation (as they were no longer required) to use at home only to find that the fan noise is too loud. As such I'm looking to sell off this hardware and replace it with some combination of fanless hardware that will allow me to

Hello, I had a partner of mine present a Centrex 21 brochure and ask how many of those features can I fulfill. There is nothing out of the ordinary, it's stuff like call hold, call forward, 3-way calling, etc. Has anyone assembled a how-to that shows how to configure PBX or Centrex type functionality? I found one in the voip-info wiki but only a couple of topics were filled out. Regards,

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year