similar to: LineJack PSTN Out

Hi All, Does anyone know if there has been any developments in asterisk to use LineJacks to dial out (connect to the PSTN)? The card works perfectly with virtually anything else but asterisk. Maybe the CVS versions have some work on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

Hello All... I have searched in the archive and also followed Zara's instruction on getting incoming calls to work with Asterisk...but I still can't get Asterisk to answer incoming call on Linejack's LINE port. I attached a phone set to the PHONE port, and telco line to the LINE port on the Linejack(ISA) card. I have downloaded, compiled and installed the newest driver for

Hi there, I?ve been out for some months now, haven?t been checking the list at all. Does anyone know if the problem with the Quicknet Linejack (FXO) card dial out to PSTN with asterisk was solved? Is anybody working on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup

Dear all I read on the list back in 2003 that * does not support IXJ LineJACK dialout yet is this still the case? Thanks

Hi, Is it possible to use asterisk with Free World Dialup (FWD) ? Did someone manage to make it work? how? Best, -P -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

It would be nice if Digium updated the hardware compatibility list on asteriskpbx.org to indicate that the LineJACK can't be used for dialing out. I've seen several people on IRC be burned by not knowing this. --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)

Hi, I am trying to get a prototype working based on Asterisk and Quicknet cards. I currently have to systems set up each with a LineJack card. I have the systems working, but can't get the voicemail demo to work properly. Messages to the user telephone set from the voicemail system are clear, but recordings left through the phone are distorted. Sounds like the audio has lots of echo and

Hi, I am successful in getting incoming calls for my linejack .... But, I am getting an error cannot create channel of type Phone.... Does linejack do outgoing calls in asterisk ? Thanks, PTA -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031011/79060c3b/attachment.htm

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

Hi, Anyone configured X-Lite with asterisk? Any help on config, both on X-Lite and asterisk? I managed to have SJPhone working OK with * but not X-Lite. Any ideas? -Z -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

I have a Quicknet Linejack in /dev/phone0. My phone.conf is: [interfaces] mode=dialtone format=slinear echocancel=medium context=mayores device => /dev/phone0 Only I can mark 7 digits, soon asterisk tries dial automatically. I cannot mark 8 or more digits. 6 or less digits work ok. -------------- next part -------------- An HTML attachment was

Hi, When I compile * with just make I get problems, I can't ring the phonejack PCI I have installed but when I compile with make valgrind I don't have problems ringing the PhoneJack. Anyone has been through this? Maybe that's a Dev list question, anyone on that list could please forward it to them? Cheers, -P -- __________________________________________________________ Sign-up

Hi All, Here at my office we have two basic ISDN Access with two phone lines each. We would like to install an Asterisk PBX. The question is: How can I connect the ISDN lines to Asterisk? Is it possible to connect to a DIGIUM Wildcard TE410P card? Or this E1 card is only for PRI access? Any other suggested and tested hardware for a production box? Let me know, -Z --

I found a message from you to the asterisk users mailing list from 2001. I was wondering if you got (or still have) an asterisk system working with the linejack? If so, would you be willing to assist me with mine? I seem to have things working, and * says that caller ID is coming in, but I can't get * to actually answer the call. Thanks, Greg -- NetIO.org

Hi, Not sure if anyone will be intersted but I have put together an install guide for Asterisk on RedHat 9.. Its nothing special but it may be of use to the newbies.. Like me.. If you would like a copy let me know and I will send it to you.. later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze