similar to: OT: Multiple SIP phones behind NAT gateway?

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3179 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040908/53404b39/smime.bin

Hi all, I was wondering whether any of you have experience/info on Cable and/or ADSL modems that would come together with a SIP phone adaptor. What I am interested in is something that would plug directly into you ISP's cable (be it ethernet or adsl/phoneline), would combine a modem/router/nat such that on the other you could simply plug in your RJ-45 cable for your PC and a RJ-11 cable for

One for the gurus.. I have seen there has been a lot of discussion about using SER with Asterisk.. This to me seemed like an over kill becasue it would basically be doing most of what Asterisk is doing anyway unless you create some weird and wonderful config in SER.. Anyway, I decided to go and have a quick read through the SER docs and in the section about NAT they say that the best way to

well .. good news :) i've just put in txgain=1.0 rxgain=1.0 in my zapata.conf and upgraded the Grandstream Budgettones i'm using to version 81 of the software and all seems fine .. there is still an echo but after the first couple of seconds of call it vanishes, as the echocancelling kicks in .. so far my client is happy :) now .. i have one slight problem left .. although most of my

i cannot see caller ID of the call originated from outside zap channel. i hv configured both zapata.conf and extensions.conf. i m right now in india i think asterisk only supports Bellcore enable caller ID. so is it the same bug of BT caller ID problem in UK? or it is the bug of my asterisk configuration? i hv enabled callerID from my TELCO. -------------- next part -------------- An HTML

Hi, Does the G.729 module support adding more licences??

Hi, I installed s fresh system yesterday and it seems that zttool did not install!! ztcfg is there.. Anyone else had this problem or is it just me? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

Greetings list, Thanks to all who replied to my thread a few days ago "SIP devices with packet loss tolerance". One of the suggestions that came out of that thread was to replace routers at users' premises with ones that support QoS. I've used m0n0wall's QoS in the past with reasonable success, but it's quite a bulky and complex setup for deploying to remote sites which

Hi, Quick question to all the electronics gurus out there.. I unpacked my second GS phone yesterday (had it for about a month!) and set it up.. This morning the power supply is dead.. I have looked for a new one online (In the UK using Maplin let me know if you know a better place.) becasue it would probbaly take too long to get one sent from China or the US and I need to get that station

Hi, Has anyone worked out a way to use Asterisk in a Hot Desk environment?? I have not been able to think of a way for the user to have control over which IP phone will ring when that users extension is dialed without the user needing to reconfigure the phone.. Something like this would be cool.. User dials *8555 (or similar) and is prompted to enter their extension and then password, after

Hi,. How can I make that Voicemail app to play only my own recorded message without the default one? Thanks, Dan

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: Steve Beaumont.vcf Type: application/octet-stream Size: 215 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041226/1c213f8a/SteveBeaumont.obj

Hi all, Is there any alternative hardware components for multi port FXO cards, other than Single and E1 or T1 level? For example 4 or 8 port FXO card is ideal. Also the price matters. Thanks!

Hi.. How do you accept user input while waiting or playing moh? My Dialplan is as follows.. ring,ring,.. Hello thanks for calling blah blah... Please enter the extention number blah blah... WaitMusicOnHold(10) If no input pass call to operator.. The problem is that the user has to input the extension while they are being told what to do.. any input during Wait or WaitMusicOnHold is ignored...

Hi, Is Asterisk (or can it be set up as) a SIP proxy? Thanks -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Should the following setup work? SIP UA---NAT---Internet---NAT---SIP UA If both UA's support STUN and report the external IP address in the SIP packet.. I am trying to get away from using canreinvite=no so that traffic can go directly between the UA's and not via the central server but I can't seem to get it to work.. Has anyone set this up and can give me some pointers??

Look like SNOM have rolled back the firmware version of the 200's from 1.16w to 1.16q.. Anyone know why? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I thought I would give RedHat 9 a try with Asterisk..I thought it would be a good idea to use the latest version.. Zaptel, Zapata and Libpri all appear to have compiled sucessfully.. But.. (Why is there always a but??) It seems Asterisk is having issues with 'termcap' or 'tgetent' whatever that is.. Here is the output from 'make install'.. --------Start-------- if [ -d