similar to: torisa: trying to understand the design

?Hola! torisa.c (from zaptel 0.50) says: #define MASTERVAL 0x41 /* Enable E1 master clock on Rev. B board */ Does that mean that there is a torisa revB? If so, are the schematics downloadable from somewhere? (www.zapatatelephony.org only has Rev. A ones) Does the Rev. A support E1? (just changing the DS2151 for DS2153, the DS crystal and closing the E1 jumpers, or something else is

Looking at my log file I found the following error: May 2 12:00:45 debian kernel: Zapata Telephony Interface Registered on major 196 May 2 12:00:45 debian kernel: No ISA tormenta card found at d0000 May 2 12:00:45 debian kernel: Zapata Telephony Interface Unloaded May 2 12:00:45 debian insmod: /lib/modules/2.4.20-8smp/misc/torisa.o: init_module: Input/output error May 2 12:00:45 debian

Followed the "instructions" on voip-info.org regardinging fedora FC2, making Zaptel seems to work fine, however when I modprobe I get this. It looks like a version mismatch somehow. Ideas? If this ooc, sorry first post here :-) modprobe tor2 WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.358smp/misc/zaptel.ko): Invalid module format WARNING: Error inserting zaptel

Greetings, I'm having some trouble with the realtime engines. When asterisk loads, everything looks fine, there don't seem to be any problems via notices or anything. Furthermore, cdr_odbc is working, and actively logging my failed call attempts to db through ODBC using the same DSN. unixODBC and the mysql drivers are installed from source. Here are the relevant parts of the config:

Hi All, This is our 2nd E1 client that we try to use crc4 either with the e100p or with the e405p without luck. After some trials, we ask the telco to switch off crc4 on their side and everything works flawlessly. Is there anything in the crc4 calculation that may be broken? We took a look at wct1xxx.c and wct4xx.c but there doesn't seem to be much there to be fixed (apparently the crc4

?Hola! [Please keep me in the Cc: list, i amn't subscribed to the list] (From ftp://ftp.plig.org/pub/OpenBSD/OpenSSH/portable/openssh-2.2.0p1-vs-openbsd.diff.gz) --- ssh-openbsd-2000090200/sshd_config Tue Aug 8 16:55:05 2000 +++ openssh-2.2.0p1/sshd_config Wed Aug 30 09:40:09 2000 @@ -2,7 +2,7 @@ Port 22 #Protocol 2,1 -#ListenAddress 0.0.0.0 +ListenAddress 0.0.0.0 #ListenAddress ::

Hola! I''m trying to follow the User Manual''s example on how to run ttylinux on xen and failing. # xm create ttylinux-xen.cf -c Using config file "ttylinux-xen.cf". Started domain ttylinux, console on port 9604 ************ REMOTE CONSOLE: CTRL-] TO QUIT ******** Linux version 2.6.11-xenU (horape@elanor.compendium.net.ar) (gcc version 3.3.5 (Debian 1:3.3.5-3)) #1 Thu

Hola! I''ve just downloaded rails edge and noted two strange things: ---------------- 1. The "About your application.s environment" link on "Welcome aboard" page fails saying: Rails/infoController#properties uninitialized constant Rails::InfoController The trace ends like : vendor/rails/activesupport/lib/active_support/dependencies.rb:178:in

Hola! I've a Digium E1 card, zaptel recognizes it as (loading the module with debug=1) Setting up DMA (write/read = 321b2000/321b2200) Controller version: 43 Framer: DS21554, Revision: 5 (E1) Found a Wildcard: Digium Wildcard E100P E1/PRA Using CCS/HDB3 coding/framing with CRC4 120 Ohms Calling startup (flags is 4099) Started DMA Got interrupt: 0x0005 /etc/zaptel.conf:

Hola! I'm using asterisk as H.323 -> PRI gateway. First call goes thru ok, second concurrent call fails with: Aug 6 11:52:30 DEBUG[737292]: chan_h323.c:1038 setup_incoming_call: Sending to context [ip2pri] -- Executing Dial("H323/ip$192.168.32.25:60271/984", "Zap/1/9541163107100") in new stack Aug 6 11:52:30 NOTICE[753677]: app_dial.c:554 dial_exec: Unable to