similar to: New 4port FXS

Scenario, I got some very good help earlier from Joseph getting me up and started but I have a couple of small problems still. Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4 Analog dialout line and Analog handset plugged in. Problems: 1. Incoming calls work and the phone rings and can be answered no problems, (although I wouldn't mind being able to adjust the ring but

Seems to have struck a small problem.. Using a t100p & Zhone channel bank.... one extension ringing another.....the following will appear WARNING[18448]: File chan_zap.c, Line 2685 (zt_handle_event): Didn't finish Caller-ID spill. Cancelling. if we are using defaultzone=au change it to us and the problem goes away..... any possible solutions ?? Gary .

Well, I thought I had my problem solved, but it is acting up again. Hopefully this time I can provide enough information. What I have is an * box setup with one X100P and TDM400 with one FXO and one FXS. For my regular setup with interfacing with my PSTN and my entire house with analog phones, the box is working great. I am trying to interface a Mediatrix 1202 device to my * box via the

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

HI I have two servers both of which get this message on one of the lines. Ring/Off-hook in strange state 6. The one server seems to be ok with it, but the other one when an extension picks up there is no one there and the incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like someone had suggested, but it didn't do anything. I also upgraded zaptel to the latest. 1.2.18 and

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Calling out on PSTN over a TDM400P seems to generate a Red Alarm - whatever that is. I have another extension on the PSTN, and I can dial out over that. zttool shows no alarms. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV I Board 1 OK 0 0 0 CAS Unk YEL 0 db

Hi all, I have hit a wall configuring a TDM400, I have set these up before without issue but today I just can't seem to figure out what I am doing wrong. On an incoming call the following is produced in the Asterisk console with verbose 4 -- Starting simple switch on 'Zap/2-1' Mar 22 16:12:34 NOTICE[2051]: chan_zap.c:6063 ss_thread: Got event 18 (Ring Begin)... Mar 22

Here is a log from a recent call made out on a ZAP channel from a SIP phone inside my network. For some reason, CDR is billing time even though the "busy tone" was detected. It's also logging the call as ANSWERED. Is this normal behavior? Seems a little odd to me. I have this as the first 3 lines of my zapata.conf [channels] busydetect=1 busycount=3 CVS HEAD updated late

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

Anybody else get theses warning? [Jun 26 10:08:55] WARNING[3158]: chan_zap.c:4747 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1 PB

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

I have an issue getting any incomming calls When the phone rings something picks up and gives it a fast busy. There is no one using Zap/2 it does the same thing with voicemail and voicemail 2 you can see the console output below, I would love any help anyone could shead on this issue, Michael NOTICE[1192484144]: File chan_zap.c, Line 4270 (ss_thread): Got event 2 (Ring/Answered)... --

Hi, Has anyone seen this problem - Nov 25 18:09:14 WARNING[12923]: chan_zap.c:3463 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. I started to get this message after upgrading from 1.0.2 stable to the latest CVS. Hope someone can help me out here. Regards Garry Taylor

I am having problems getting incoming caller id to work on a Telstra Onramp 10. I have changed "/DEFAULT_CIDRINGS 2"/ Is there something i'm missing ? My Cisco 7960 just shows "asterisk" Thanks, Nathan [zapata.conf] context=incoming usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local usecallerid=yes callerid=asreceived

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this