similar to: Running Asterisk on non-intel hardware

Dear All Can you please do me favor and let me know how can I check for my CentOS mainboard type ? Please be informed that I want to know if it is as EPIA 500 or EPIA 600 and I am seeking a way to check it as we check for our HDD type via /proc/ide/hda/model . Can you please let me know where such an info can be checked via /proc folder ? Let me thank you in advance -------------- next part

> Date: Sun, 19 Sep 2004 12:59:52 -0600 > From: Rich Adamson <radamson@routers.com> > Subject: [Asterisk-Users] Re: [Asterisk-Dev] X100p on VIA EPIA-V > problems > To: asterisk-users@lists.digium.com > Message-ID: <Chameleon.1095617288.adar0@vegas> > Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-1 > > > I'm running Asterisk on my (new) VIA EPIA-V

I am using a Asus M2A-VM mainboard with Athlon X2 2300 cpu. The mainboard features a AMD 690G chipset. I thought this hardware is amd-v compatible. While using xen with hvm I get the message: root@pluto:/etc/xen# xm create /etc/xen/win.cfg -c Using config file "/etc/xen/win.cfg". Error: HVM guest support is unavailable: is VT/AMD-V supported by your CPU and enabled in your BIOS?

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

Is that a bios setting (I don't recall seeing it) or an OS setting? I run a lot of Via C3 machines (they are so nifty) but don't remember seeing this. -----Original Message----- From: Technical Support [mailto:support@ocg.ca] Sent: Tuesday, September 06, 2005 10:43 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion'; shmaltz@gmail.com Subject: RE: [Asterisk-Users]

Hi, I was wondering if anyone had a good dhcpd.conf and /tftpboot files for a EPIA-M motherboard with RedHat 9.0.... Or maybe just a configuration that works with the EPIA-M (doesn't matter which type of linux). I'm trying to boot the system from the network and it seems to be getting to downloading pxelinux.0 but then nothing happens after that.... I'm using ISC dhcpd V3.0pl2,

I use them with just the one NIC card. I don't use them as a router so the phones and my gateway are all on the same network. -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Remco Barende Sent: Tuesday, September 06, 2005 4:33 PM To: Asterisk Users Mailing List - Non-Commercial Discussion

--- Raja Chidambaram <raja_chidambaram82@yahoo.com> wrote: > Date: Wed, 3 Aug 2005 06:27:05 -0700 (PDT) > From: Raja Chidambaram > <raja_chidambaram82@yahoo.com> > Subject: Phone interface hardware > To: Asterisk-Users@lists.digium.com > > Hello All, > > We are in the process of putting together an asterix > based phone network in our office. The

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Is there any problems using this board? I have a dead board in a Book-PC (board size 10.5"x6") so am looking for a new board. Actually I want 2 LAN ports. 'Router' boards with enough umph to run Centos are expensive. I can pick up a VIA epia-m with 512Mb memory for $70 including shipping, so this is rather attractive option. I do have a 100Mb low-height PCI board that I

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Hi, I've been learning asterisk for a couple of weeks now - and it worked for me as faar as standard configurations where concerned (sip/iax outbound/isdn4linux & capi with AVM Fritz!, Digium X100P FXO). Now I recently I'evaluating to use asterisk as a replacemnt for our companies (15 employees) legacy pbx system and I'm experiencing multiple problems with the hfc isdn cards:

Does anyone have recommendations for (or against) mini-ITX platforms to be used with Wildcard X100P and TDM400P cards? I am considering the use of systems using VIA EPIA CL and Epia M as small, quiet platforms on which to host Asterisk.

I have written a step-by-step setup for installing Asterisk on Debian using the VIA EPIA M platform. It is oriented to the Linux novice (myself being one). Feel free to use it :) http://www.steady-com.com/asterisk/debian-install.html

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

I would like to ask what people think the best way would be to build a low-power consumption, passively-cooled system. For example,one could use a fanless-Eden (mini-ITX/EPIA) system, but the loss of FPU power would limit performance. The obvious choice for FPU work are the Intels and AMDs, nut they're all power-hungry radiators. Is there something that can offer the quiet, power-savings of

Hi, I am trying to install asterisk 1.0.7 on a VIA EPIA 5000 board - anyone of you already managed to do so? I got V1.0.6 running, but 1.0.7 seems not to compile. I don?t want to bother you all with output code of the errors I get when I try to compile asterisk; I am just curious if anyone of you made it! Thanks for a quick reply! Sincerely, Armin Lediger

Greetings, I've been having a large number of deadlock issues lately on chan_sip occurring only on VIA EPIA ML6000 boards. I'm curious if anyone else is having similar issues. My Config (have multiple systems all running the same hardware with the same problem) VIA EPIA ML6000 1GB RAM 80GB HDD Various Digium Cards (T1 and TDM cards) Trixbox 1.2.2 (though running stock asterisk code)

Hello, I don't know if it's ISOLINUX or a broken BIOS, this is the first time ever seeing this error. "Extremely broken BIOS" on a EPIA -M10 BIOS Rev 2.07 (latest ver available) EDEN VIA mini-ITX mobo. ISOLINUX on RH8 ver 1.75, RH9 ver 2.00 and Yarrow ver 2.06 all produce the same type of error. RH 7.3 and Lindows boot and build without any problem but I don't think they