similar to: Zap asterisk prob

hey, I bought a license for 729 but I can't use it this is the message. == Registered translator 'g729tolinb' from format 8 to 6, cost 99999 == Registered translator 'lintog729b' from format 6 to 8, cost 18 == Parsing '/etc/asterisk/enum.conf': Found Asterisk Ready. *CLI> WARNING[5126]: File chan_sip.c, Line 1601 (process_sdp): No compatible codecs!

Hi folks. I am using a X100P card and after some random amount of time of correct operation, say 8-20 hours, the card starts acting up and producng horrid sound quality which is all broken up. All other channels appear to work fine. One thing I noticed, is that "zap show channel 1" always shows the "Actual Hookstate: Offhook" as soon as the telco line is plugged in. Is this

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

Hi, there were some postings a few weeks ago telling that the GSM codec problem with snom100 will be fixed. But it still seems to be very quality. Will be any change in this subject? THX -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030516/2fa9d206/attachment.htm

Don't know what else to call this. Googling and some time on the IRC channel haven't gotten me anywhere. Here's the sitch, which is a bit complicated but is something my customers are in fact encountering on an everyday basis: 1. Bob is on a Zap channel talking through the PSTN to Carol. Both have the misfortune, like so many of us, of having LECs who do not offer disconnect

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

Hello, When i run the code below from Weibull distribution with 30% censoring by using optim i get an error form R, which states that Error in optim(start, fn = z, data = q, hessian = T) :? ? objective function in optim evaluates to length 25 not 1 can somebody?help me remove this error. Is my censoring approach correct. n=25;rr=1000 p=1.5;b=1.2 for (i in 1:rr){ q<-c(t,cen)

Thank you for Prof.Ripley's suggestion. I fixed the program by adding a lower scope, and the program ran, but I still got warning messages, and don't know what is going on, would this affect my results? ... Step: AIC= 12337.74 Surv(tlfup, cen) ~ MI[[j]]$trt + MI[[j]]$agem40 + MI[[j]]$agem40sq + mhtypeed1 + mhtypeed2 Df AIC <none> 12338 -

The problem: T100P connected to an Adit600. Channel 1-16 are FXS, 17-24 FXO. I have Zap/24 in callgroup 3 and Zap/1-16 in pickupgroup 3. When a call comes in on Zap/24 I cannot pick it up with *8 from Zap/1-16. *CLI> show version Asterisk CVS-04/27/04-23:48:08 built by root@tuck on a i686 running Linux The zapata.conf and extensions.conf are located here:

Should be simple and perhaps I'm tired but it's not coming to me. In its simplest form... for old in `cat "$FILENAME"`;do echo "$old" dirname "$old" new="$(echo $old | sed 's/\*/\-/')" done I'm trying to take out some stupid Macintosh things - in this case filenames with asterisks but I have others like tilde's and probably

My TDM400P w/ 4 FXO cards seems to have trouble with onhook/offhook switching. It dials perfectly, but does not seem to be changing the onhook/offhook state appropriately. It changes sometimes, but it's not really reliable. For example: When I booted the machine, it started as onhook. It remained "onhook" through the entire first call (which was silent on both ends --

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the

I tried implementing my * and it didn't pass the spouse factor at this time. I wanted to hook it up for outbound only at this point to get a better handle on the dial plans and the echo problem. I thought this might have been done before as a natural part of testing - but maybe not. In wcfxo.c I found this: if (!wc->offhook && !wc->ringdebounce) { if

Hi, Found this in logfiles: Jul 25 14:12:38 dovecot: pop3(cen at so.red): Error: UIDL: File name lookup failed: Message was expunged Jul 25 14:12:38 dovecot: pop3(cen at so.red): Disconnected: POP3 UIDLs couldn't be listed top=187/356348, retr=0/0, del=0/1207, size=789346199 Jul 25 14:12:38 dovecot: pop3(cen at so.red): Panic: file ioloop.c: line 39 (io_add_file): assertion failed: (fd

Hi, there: It's my first time to post question in this forum, so thanks for your tolerance if my question is too naive. I am using a nonparametric smoothing procedure in sm package to generate smoothed survival curves for continuous covariate. I want to truncate the suvival curve and only display the part with covariate value between 0 and 7. The following is the code I wrote:

Hi, I'm analyzing a large number of large simulation datasets, and I've isolated one of the bottlenecks. Any help in speeding it up would be appreciated. `dat` is a dataframe of samples from a regular grid. The first two columns are the spatial coordinates of the samples, the remaining 20 columns are the abundances of species in each cell. I need to calculate the species richness in

Hello all, I am trying to use stepwise procedure to select covariates in Cox model and use bootstrap to repeat stepwise selection, then record how many times variables are chosen by step() in bootstrap replications. When I use step() (or stepAIC) to do model selection, I got errors. Here is the part of my code for (j in 1:mm){ #<--mm=10 for (b in 1:nrow(reg.bs)){ #<--bootstrap 10

Hi all - (this is posted to r-help and R-SIG-MAC) OSX 10.3.7, R 2.0.1, lme4/Matrix/latticeExtra latest, fresh install of R. MASS loaded (or not). I am getting an error message for the print() and summary() commands with all lme models I try and run in lme4 (GLMM's work fine). Using the example from the lme help, summary and print produce the following errors, despite the model being

I have found that lower cased boolean operators such as "and" or "or" does not work. Of course I never forget setting FLAG_BOOLEAN_ANY_CASE flag. QP seems to treat them as terms. Just look at the following tests regardless of search results! $ python search.py -v woman AND man Performing query 'Xapian::Query((woman:(pos=1) AND man:(pos=2)))' 0 results

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be