similar to: No hangup detect after adding second X100P

I have a couple of X100P's in my system and while on calls they just randomly hang up for no reason. I have tried messing with the busydetect and callprogress setting them to yes and no same and still random hangups. Is there another setting I should be looking at? My zap config looks like. context = inbound-work include => extensions signalling

When I enable callprogress I get this error message... (when I call, it will ring forever but asterisk is acting as if it DID pick up the line ... but it never did... ) I'm beginning to think that asterisk can't hangup the line when in voice mail and this, whatever action I'll take... Actually, callprogress doesn't seem to work at all... (in my case) Mar 24 23:37:28

FYI to anyone else who may be experiencing random hangups; I removed the busydetect=yes lines from the conf files on my asterisk servers, and haven't had a hangup since. I had done that once before and it didn't seem to have much of an effect, so I'm not breaking out the champagne yet. But so far over dozens of calls both made and received since I took that line out, I

> Hi Gareth Blades & Doug, > > Thanks so much for for the feedback. I have searched on lot of documents > but couldn't able to find clear answer regarding it. > > I hope you guys replies are very much help all in aterisk community. > > > Thanks & Regards, > > Vidura Senadeera, > > Network Engineer, > > Debug Solutions > > Sri Lanka .

simple setup... two * boxen, X100P in each pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2) with busydetect=yes and callprogress=yes in zapata.conf, calling from pots(1) through to pots(2) we get the following -- Zap/1-1 is ringing -- Zap/1-1 is ringing etc, and if nobody picks up, then it timeouts and hangups, good however, if during the ringing,

Hi everybody I am having problem detecting fax with my X100P. I have RedHat 8 as OS and an X100P and a TDM400P. The X100P being plugged into PSTN. I have successfully installed tiff-v3.5.7 and spandsp-0.0.1 and also patched Asterisk wthout problem. Here is my zapata.conf file context=cda signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5

Hi, Just wondering if anyone else in Australia is using the X100P to connect to the PSTN, and what configs they have for it? I'm finding at present when I make a call I get a fair bit of echo of myself speaking, and also the person on the other end can't hear me very well (perhaps need to up the digial Tx Gain? I don't have it configured at present) Asterisk is running on

Hi all.. I have a problem with my asterisk installation. I'm using a Wilcard X100P clone in Spain. Incoming calls work fine, but when I make a outgoing call, a hear the ringing, and the peer phone ring, when the peer answer, asterisk hangup the call, or say busy. This is my conf: zaptel.conf: --------- loadzone = es defaultzone=es fxsks=1 zapata.conf ---------- [channels]

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Thanks for your suggestion Steve. I have done as you advised and set busypattern=300,200 to match the sample I recorded. This hasn't worked though, asterisk doesn't seem to detect the busy signal. Does asterisk require a the signal to be in a certain power range? The signal I get is very quiet. Thanks for your help Regards Jonathan On Mon, 19 Dec 2005, [ISO-8859-1] Diego Andr?s

Hello, After much searching of voip-info.org and google, I'm finally giving in and asking the list. The setup I have is this:- Single X100P card in a Debian system Inbound/Outbound POTS line connects to the X100P Sipura 2000 and Budgetone 100 on the LAN 1 Cordless and one conventional phone connected to the sipura Account on Stanaphone.com for eitherbound SIP calls. (I have other SIP

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

I'm having a problem getting 3 way calling to work correctly using two outside lines and one extension. The two outside lines are connected to the X100P's and a standard model 2500 phone is connected to the TDM10. When I dial the first outside destination 9xxxxxxx, the call completes correctly. When I flash the hook switch and dial the second location 9yyyyyyy. The call doesn't

Hi, I have configured tdm400p alone and it works fine for me. But now i tried to add 2 x100p in the same machine with the following configs, but asterisk refuses to load, can someone guide me what i have done wrong. Following r the configs and output. TIA, Azher >> ./asterisk -vvvvvc [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found --

Howdy y'all, I am using an ATA-186, through Vonage, connected to my X100P. It works well - except, hanging up... The hangup doesn't register, most of the time, with Asterisk. Are there any known tweaks out there that I should look into? I've noted some have altered dsp.c, and rebuilt. Just curious to see what y'all think. Below is my zapata.conf file:: [channels]

Hi, Does some one experience the Sangoma A20X-ec series card that cant detect the hangup tone? I got * server 1.2.5 and running on Centos 4.3, I hock up to two PSTN lines and each time some one call in and my phone delay 1-2 sec (this is Asterisk delay nothing to do with Sangoma) and it rings on my phone, however, end on the day I got not less that 10 empty messages. I found out that Sangoma FXO

When a caller hangs up (e.g. after leaving a voicemail), my British Telecom exchange sends a continuous tone for about 15s and then silence. I can't get asterisk to recognise this tone as a hangup indication. I have tried indications.conf with both country=uk and country=us. My zapata.conf has busydetect=yes, callprogress=yes and I've tried setting busycount from 1 through 7 I am using

Hi, Im getting mad with this error, I have a x100p installed with wcfxo module loaded perfectly, I can receive incoming calls and detect very good the hangup for incoming calls. But for outgoing calls its a mess. When I place a call for outgoing, i heard the ringing, my cell or phone rings and when I pick up the phone it hangs: -- Called g1/91xxxxxxx -- Hungup