similar to: Cisco 7960

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

Gents, I've built an Asterisk system to replace our PBX at work and have Cisco 7960 phones (SIP 7.4) running with Asterisk 1.0.7. How to I get Asterisk to recognise the '#' being pressed during a call? In sip.conf I have entries likle this: [2001] type=friend context=local-phone auth=md5 username=2001 secret=xyzzy callerid=Jack Tubby <2001>

I have noticed a problem with the Cisco 7940/7960 phones where if you put your voice-mail box on hold using soft keys and come back you can no longer navigate. I am curious if anyone else can duplicate this problem. Happens reliably for me with the 7940 phones. I use rfc2833 for DTMF. I would think it was a Cisco bug, but for the fact that this did not happen with older version of

Hello all. We have an asterisk system set up, and we are seeing a lot of multiple DTMF digits being read by asterisk. In digging through the archives the only answer I have seen is to put in the statement relaxdtmf=yes in the zapata.conf file. Since we are not using any zapata devices, I have tried to put that statement in my sip.conf file to no avail. Any help would be appreciated as my end

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi All Total noob on the list so all help appreciated.... I've successfully installed Asterisk on an IBM A30P Thinkpad using fedora Core 2 (I'm looking at having a mobile PBX for conferences and shows). I've plugged in two Cisco 7960 phones.... The phones register with the Asterisk correctly and I can run the demo's and even the AIX demo through to digium works correctly.......

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47

Is there a way to make the Cisco 7960 SIP phone dial out automatically without having to press the dial button, once the numbers that you have entered match a specific pattern? This feature is present when the phone is working with a Cisco CallManager. For example, if all of my internal extensions begin with a '5' and are four digits long, if I dialed '5123' on the phone, the

Does anyone know how to customize the order of the soft keys on a 7960 running SIP? All the documentation I could find is CallManager related. Specifically, I want to move the transfer function to the first set of buttons during a call.

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

Hi All! First, let me introduce myself, as this is my first post to the list (I've been lurking for quite some time now). My name is Matt Hardeman, and I work for a software development firm in Birmingham, AL. We are interested in the Asterisk PBX and it's various configurations first as an internal solution for our occasionally bizarre telephony needs, and eventually are interested

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

<div><br><div><br><br><br><br><br><font color="#990099"><br></font><blockquote style="border-left: 2px solid rgb(0, 0, 0); padding-right: 0px; padding-left: 5px; margin-left: 5px; margin-right: 0px;"><div><div><br> <asterisk-users-request

I found a few mentions of the 7914 being used with Asterisk, these all covered SCCP/skinny though. Does anyone know if the 7914 can even be used with SIP? If so, any pointers? Is it a services thing? Anyone get the operator (line/extension status) to work with it. Thanks for the help, Cisco doesn't even mention ANYTHING about SIP + the 7914. Matt

Can someone point me in a direction where I can acquire the Cisco 7960 SIP firmware? I just purchased two phones of ebay, but they are both in Call Manager mode. Thanks, Marcus -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030515/6265b777/attachment.htm

Hello, I have just bought a cisco 7960. I cannot find any information how to get into configuration panel on Cisco 7960 I need to configure cisco 7960 to work with asterisk but I do not know where to start with cisco phone. Where in the phone I can configure all settings ? Thx.

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've noticed that a few people here are from Australia. I'm wondering where you all get your hardware from. I'll probably order some of the X100P cards from Digium soon (and possibly some FXO cards), but for other things such as ATAs, etc. However - these obviously aren't ACA compliant. Does anybody know of compatible hardware (for POTS lines) that is ACA compliant? The cheapest