similar to: help with linejack card

Hi folks, First off all, I'm new to asterisk. I'd like to make a basic installation of * with a Linejack, as recommended in this mailing list, I downloaded and setup successfuly the pwlib, openh323 lib, asterisk and chan_323. I have made little changes to default configuration files packed with asterisk and I managed to call with the telephone plugged in my Linejack a friend

I have a Quicknet Linejack in /dev/phone0. My phone.conf is: [interfaces] mode=dialtone format=slinear echocancel=medium context=mayores device => /dev/phone0 Only I can mark 7 digits, soon asterisk tries dial automatically. I cannot mark 8 or more digits. 6 or less digits work ok. -------------- next part -------------- An HTML attachment was

Hi, I have been experimenting with Asterisk and the linejack card and have discovered the follow: 1) The linejack in FXS mode works well with asterisk as long as the format in the phone.conf is set to ulaw. With mode set to slinear, gsm recorded messages played by voicemail appear to be slightly choppy (sounds like a click at the end of each frame). 2) Using the configuration above, the

I cant seem to be able to figure this out. As much as I can tell it is a codec problem. I can dial out to 612@fwd.pulver.com and the "Call Me" test there rings my phone. However when the callee endpoint answers, there is a failure to translate: Outgoing Call for 612 612 is not a local user -- Called 612@fwdpulvercom No path to translate from SIP/fwdpulvercom-dd5a(2) to

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

How will this fare? I am planning on putting an asterisk box for my brother in the Philippines but they only have dialup internet. I want them to be able to use a telephone set on a phonejack or linejack card and call me and vice versa via VOIP. My setup in the US is working already with a broadband cable connection. I am thinking that dialup may not work because of the bandwidth required

I found a message from you to the asterisk users mailing list from 2001. I was wondering if you got (or still have) an asterisk system working with the linejack? If so, would you be willing to assist me with mine? I seem to have things working, and * says that caller ID is coming in, but I can't get * to actually answer the call. Thanks, Greg -- NetIO.org

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

Hi there, I?ve been out for some months now, haven?t been checking the list at all. Does anyone know if the problem with the Quicknet Linejack (FXO) card dial out to PSTN with asterisk was solved? Is anybody working on it? Cheers, -Z -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

I don't have any experience of your problem - but I thought this might help. http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html <http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html> The UK (and some of it's former colonies) use a system called 3-wire ringing. Some equipment from overseas requires an adaptor to make it work. I don't know if the LineJack is one

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

I have a Quicknet Linejack. Actually, I want to make a standalone(no internet connections) call to my asterisk box running GNU/Linux. When I call the system it says: -- Executing BackGround("Phone/phone0", "demo-congrats") in new stack NOTICE[14349]: File channel.c, Line 1212 (ast_set_write_format): Unable to find a path from 2 to 1 WARNING[14349]: File file.c, Line 553

Good evening, I am just getting started with Asterisk. I have it installed, and I believe I am on the right track, overall, to get it working, but I can't get the linejack to answer any calls. At this point, all I'm trying to do is have Asterisk answer an inbound call on my linejack, /dev/phone0, and play a greeting or tone. I figure, once I am able to get asterisk to actually answer the

Hi *, now for a long time i am trying to set the outgoing callerid, without luck. I am here in Germany, my asterisk has a pri interface connected to a PMX installed by Telekom. All telephone calls are preselected to EcoVoice. I am using asterisk 1.2.7.1, zaptel 1.2.5 and libpri 1.2.2. A week ago we tried with a device able to simulate a telephone system so send out a callerid, and that

(PLS, also CC: to 7ukwn@wanadoo.fr, which is my private address) Hi, I'm trying to setup 2 boxes with Asterisk; one with one quicknet PhoneCard, the other with two Quicknet cards: a PhoneCard and a LineJack; either boxes have a phone connected to the PhoneCards, a regular line is connected to the LineJack They'll be both on the internet (by adsl) and the purpose is to be able to make