similar to: centos4.2:raid1:grub

I posted this to the Fedora-list, but thought I might get some additional information here as well. I have a HD that refuses to mount with a 'bad magic number in super-block'. I'm running FedoraCore 6 x86_64. [root at moe ~]# fdisk -l /dev/hdc Disk /dev/hdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes

first time poster here - hello everyone I started out with CentOS x86 5.3 with the following partitions on my source hard drive: /dev/hdc1 swap /dev/hdc2 / I did the following to migrate my CentOS box to the destination hard drive: 1. boot up with CentOS 5.3 livecd in rescue mode 2. partition destination hard drive (/dev/hdd) /dev/hdd1 swap /dev/hdd2 / 3. create the

Hi I have a Raid 1 centos 4.4 setup and now have this /proc/mdstat output: [root at server admin]# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 hdc2[1] hda2[0] 1052160 blocks [2/2] [UU] md1 : active raid1 hda3[0] 77023552 blocks [2/1] [U_] md0 : active raid1 hdc1[1] hda1[0] 104320 blocks [2/2] [UU] What happens with md1 ? My dmesg output is: [root at

hi! raid 1 arrays: I already have 2 systems running this same raid1 config. 1 sys has 2 120 gb 1 sys has 1 120gb and 1 200gb but matching the raid partitions this system here that is giving me fits right now has 1 250gb and 1 200gb. I tried it w/a new 250 gb for the 2nd drive but the same results. Will not boot. in druid, when I am config. the raid arrays, I always create the boot partitions

Hi All I've just shifteed over to linux,form Windows.I 'm having 5 partations for use by my windows XP Professional and another one by linux.The partation table is as shown : ------------------------------------------------------------------------------------------------------------------------------------------ [root at localhost6 ~]# fdisk -l Disk /dev/hdc: 250.0 GB, 250059350016

Hi, Yesterday I nuked an old fat32 partition on my hard drive using fdisk. I just destroyed the partition and then created a new linux partition. Then I created an ext3 filesystem with the following command mkfs.ext3 -j /dev/hdc1 Everything seemed fine so I went ahead and moved all my music (MP3s and FLACS) onto that partition. This morning when I turn on my computer I can't mount that

I am trying to create an additional domain and have created a configuration file based on the examples. When I try to boot the domain, it eventually hits a Kernel panic, as follows: Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none

When a new system CentOS-4.4 is built the swap partition is always reversed... Note md3 below, the raidtab is OK, I have tried various raid commands to correct. swapoff -a raidstop /dev/md3 mkraid /dev/md3 --really-force swapon -a And then I get a proper ourput for /proc/mdstat, but when I reboot /proc/mdstat again reads as below, with md3 [0] [1] reversed. [root]# cat /proc/mdstat

it seems like I keep running into a wall. The present raid array...well let me do an fdisk -l: ---------------------------------------- Disk /dev/hda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 13 104391 fd Linux

I am running RH 7.3 with kernel 2.4.18-27.7.x. Recently I have added a new 60GB Quantum IDE hard drive to the server. I have set it up as a MASTER on a separate IDE channel. Two partitions on the /dev/hdc are /dev/hdc1, /dev/hdc2 - both using ext3. For more detailed HDD parameters, this is 'hdparm -i /dev/hdc': ----------------- /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA66A,

> > Dear all, Thanks for the greate explanation regaing Software/H/W Raid. This details better but on voip-info.org/wiki pages. Thanks lot agian. Regs, Vidura Senadeera. ====================================== Dear All, > > > > I would like to get community's feedback with regard to RAID1 ( Software > or > > Hardware) implementations with asterisk. > >

Hi I have a clean CentOS 4.4 disk and I have setup a RAID 1 with two IDE disk. The system RAID 1 boot fine but when I disconnect a disk (the first disk) the system not boot. The screen goes black and not boot anything (grub not boot). Can anybody help me ? What I doing wrong ?? Excuse my english .... My setup is: df S.ficheros Bloques de 1K Usado Dispon Uso% Montado en

Erm, sheez having alot of problems :( I have just been reading all the archives on the mailing list for the past few hours and decided to try make the journal with: tune2fs -j -J10 /dev/hdc1 [root@tkw /]# tune2fs -j -J10 /dev/hdc1 tune2fs 1.20-WIP, 17-Jan-2001 for EXT2 FS 0.5b, 95/08/09 Creating journal inode: done [root@tkw /]# cat /etc/fstab /dev/hdc1 /usr/local ext3

I''m getting a VFS kernel panic when trying to booting to FC3 from Xen. Its the one that says I must supply a valid "root=" option. (sorry I don''t have it verbatim.) I''m using the xen-2.0 binary installer, kernel 2.6.9. I am using ext3fs, but I am fairly certain that I have compiled support into the kernel. (I''ve tired compile xen from the 2.0

Hi all, I know this is the EXT3 list, and my problem is with an EXT2 filesys, but I cannot seem to find a more suitable list on this server, and I have seen a lot of knowledge go by on this list and in the archives, so I thought I'd give it a try anyway... Here goes nothing: I am in a terrible problem: My data disk on my Linux server has gone bad, with approx 18 GB of data on it, and I

Hi, Sorry if this is an old and fixed issue but I can't really seem to find a definitive explanation/fix to this in the mail lists. Ever since I upgraded to FC2 my server randomly decides that it can no longer access the disk and "aborts" the ext3 journal leaving it read-only as expected. I've seen the same errors on other mail list, explained away as disk or disk cable

Recently I've encountered a problem, and now I would preciate any help about being able to undelete files. My /var filestructured is mounted at /dev/hdc1 Part of my /etc/mtab looks like this: /dev/hdc1 /var ext3 rw 0 0 I'm using the e2fsprogs-1.23-2 package currently installed with Redhat 7.2 So, could anyone give me a hint of how things could be done to find deleted inodes? I've

I wanted to boot gentoo on xen, but it doesn''t work. What can I do? Booting ''Xen 3.0.0 / Linux 2.6.12.5'' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen.gz dom0_mem=131072 com1=115200,8n1 [Multiboot-elf, <0x100000:0x641cc:0x27e34>, shtab=0x18c078, entry=0x100000] module /vmlinuz-2.6.12.5-xen-0 root=/dev/md0

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]

On Sat, 2005-11-12 at 20:44 -0600, Mike Hanby wrote: > Howdy, the path statement in the smb.conf file is using Unix pathing. > > path = /backup > > I tried adding the "guest only = yes" to the [netfiles] section and it > didn't change anything. > > Here's my [netfiles] section again: > [netfiles] > comment = Network file storage space >