similar to: pci passthrough MoBo ASUS M4A89TD Pro/USB3

This patch adds "guestdev=" boot parameter. This boot parameter is used to reassign page-aligned memory resource and bind PCI back driver. Thanks, -- Yuji Shimada. Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> diff -r 4769a6db78f5 -r fcefb8852878 Documentation/kernel-parameters.txt --- a/Documentation/kernel-parameters.txt Thu Dec 25 10:37:52 2008 +0900 +++

testing, uname -ri 2.6.33-rc5-4-xen x86_64 rpm -qa | grep -i Xen-4 xen-4.0.0_20873_01-29.1.x86_64 cat test.cfg name = ''test'' builder = ''linux'' bootloader = ''/usr/lib/xen/boot/domUloader.py'' bootargs = ''--entry=xvda1:vmlinuz-xen,/boot/initrd-xen'' disk = [

tmoore wrote: > > > I`ve raised a support case with ASUS to try to get them to fix the BIOS on > P6T Deluxe ... I`ll keep this thread updated. > > The IOMMU is seriously broken on this board, I have tried many workarounds > and it always results in failure. > > > Hello, did you get a reply? Somebody else has something new about the Asus P6T and this problem? How

This patch adds the function that reassign page-aligned memory resources, to dom0 linux. The function is useful when we assign I/O device to HVM domain using pci passthrough. When we assign a device to HVM domain using pci passthrough, the device needs to be assigned page-aligned memory resources. If the memory resource is not page-aligned, following error occurs. Error: pci: 0000:00:1d.7:

Hi all I have a problem with enabling IOMMU on Xen 4.2.1. When I enable it in BIOS and in grub.conf using iommu=1 kernel option, my machine cannot boot. I get a following error on serial console: (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) Xen BUG at pci_amd_iommu.c:35 (XEN) **************************************** (XEN) (XEN) Reboot in five seconds... Error says

We have 4 systems supported by ASUS M2V mobos with AMD2 cpus on board. No we haven't gotten CentOS of any flavor to work yet. Yes, we did load Fedora Core 6 and it worked, with respect to the SATA driver only. There is a RAID, Audio and LAN driver for Linux that comes on the M2V mobo CD. The audio driver installs and works fine on FC6. I've read many of the messages with respect to

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install,

Hello all, this is my first post to the mailing list, so I hope this is the right way to ask a question. I''ve installed xen on my laptop (Asus N51Vf, specs here: http://www.asus.com/product.aspx?P_ID=0Tc42s23bOdbbvY5), as I''m currently at university and don''t have my proper desktop hardware to play with. The laptop supports IOMMU/Vt-d and has one PCI-e Geforce GT130M

Hi. I got a asus SABERTOOTH 990FX, reading about vt-d, I read the MoBo that support IOMMU and there was chip 990FX, them I pick this MoBo, the BIOS that came with the board was 0402 05/11. I follow the xen wiki, I''m running Xen 4.1.1 from Gitco on Centos 5.7 x64, by default the MoBo have the IOMMU disable, I enable the feature IOMMU = 64MB, save the bios settings, restart, turn off

I replaced my development machine with 6 cores, 32 GB etc. I thought it would be simply inserting the existing HDDs and changing /etc/sysconfig/ifcfg-eth0 but, * in the UEFI "BIOS" USB2 and USB3 work. * in C5.11 USB2 works but USB3 does not. * in C6.5 (my install disk; OS be updated to C6.8) USB2 works but USB3 does not. On both C5 and C6 lsusb shows an entry for the plugged-in

Hi. Just wondering is someone have been able to connect usb memory sticks in xen 4.1-gitco running hvm windows 7? I use xen 4.1 from gitco, is working without any issue, I need support for a usb memory stick, but I had not been able to make this works. Reading xm commands and process, first my MB Biostar A780L3L v6 wont support IOMMU. Now exist a doc from xen wiki from someone from Fujitso

Hi Folks, CentOS 5.5 x86_64 Asrock-Board with 2 USB3 plugs. Normally USB3-drive is detected. But occasionaly after "umount" next time this drive or other ones will not be detected. I have to boot the PC - than it works - till next unrecognition. On USB2 plugs all works correct. No messages in /var/log/messages nor dmesg. What happens here? Board failure - or other reasons? Some

On Fri, 2016-03-04 at 13:35 -0800, ToddAndMargo wrote: > Hi All, > > Scientific Linux 7.2 > > # rpm -qa \*kvm\* > qemu-kvm-1.5.3-105.el7_2.3.x86_64 > pcp-pmda-kvm-3.10.6-2.el7.x86_64 > qemu-kvm-common-1.5.3-105.el7_2.3.x86_64 > libvirt-daemon-kvm-1.2.17-13.el7_2.3.x86_64 > > Question: when I set "Controller USB" to "USB3", what > USB3

Hi All, Scientific Linux 7.2 # rpm -qa \*kvm\* qemu-kvm-1.5.3-105.el7_2.3.x86_64 pcp-pmda-kvm-3.10.6-2.el7.x86_64 qemu-kvm-common-1.5.3-105.el7_2.3.x86_64 libvirt-daemon-kvm-1.2.17-13.el7_2.3.x86_64 Question: when I set "Controller USB" to "USB3", what USB3 driver do I use to install Window 7? Many thanks, -T -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Computers are like

I''ve currently got a Xen 2 system running on a CL10000 VIA system. I''d like to upgrade to Xen 3 and make use of the hardware virtualization support in Xen (sometimes). My requirements then: 1) Cheap CPU. AMD or Intel. Must have Xen3 hardware VM support. Any speed. 2) Lower power consumption from the CPU 3) Cheap mobo to support the chip. 4) Decent raid-1 SATA support on the

I'm looking for a small formfactor mobo for an install that needs to handle 25 phone sets (no transcoding). I found a new dual atom 1.66GHz mobo - anyone know what kinds of call volume that will handle? MD

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

Hello, I''m trying to do a pci passthrough for a perc 5/i raid controller and i have 2 problems (i haven''t used linux systems recently so i may be a bit rusty) : On the hardware part i''m using an ASUS M4A89TD PRO motherboard with iommu enabled in bios (and i can see with "xm dmesg" that I/O Virtualization seems enabled by xen). On the software part i

Hi, I cannot get * to run on my VIA 800 mini-itx MOBO. I keep getting "ouch...broken pipe" errors. I have downloaded mpg123-0.59r and compiled it, so I know that the problem isn't there. I edited *'s Makefile and uncommented the VIA processor section before I compiled Asterisk. Can someone that's been successful with * and the VIA 800 mobo help me out? Thanks, Mike C.

On Dec 7, 2019, at 7:01 PM, Gene Heskett <gheskett at shentel.net> wrote: > > What driver do I now put in /etc/nut/ups.conf? hid-generic doesn't seem > to want to talk to it, and the original name _(usbhid-ups) doesn't work > from new mobo. Oh wait, I can't spell. But that didn't help, and a > restart gets this error: ... > Dec 07 18:49:46 coyote