similar to: [Bug 179] New: sshd sends channel data after sending EOF

http://bugzilla.mindrot.org/show_bug.cgi?id=1264 Summary: Channel not close by sshd Server Product: Portable OpenSSH Version: 4.3p2 Platform: Other OS/Version: HP-UX Status: NEW Severity: critical Priority: P2 Component: sshd AssignedTo: bitbucket at mindrot.org ReportedBy: ajain at hp.com

http://bugzilla.mindrot.org/show_bug.cgi?id=1131 ------- Comment #18 from cove at wildpackets.com 2006-03-17 09:06 ------- It could be a bug in cryptlib, but I had the same problem with libssh and the first comment in this bug report is with a 3rd implementation. debug2: load_server_config: filename /usr/local/etc/sshd_config debug2: load_server_config: done config len = 292 debug2:

Thread split from my previous communication. Here is the integrity logs on the platform. I had to cut this should due to the length of the logs (5Mb). ***************** failed-regress.log ************ trace: test integrity: hmac-sha1 @2900 FAIL: unexpected error mac hmac-sha1 at 2900: Bytes per second: sent 65665.7, received 55994.0. trace: test integrity: hmac-sha1 @2901 FAIL:

Hello. Since some days I cannot use scp anymore but ssh login work. Reinstall did not help. I do not exactly what has changed but I now it used to work. sshd runs on a firewall-bastion host (Linux SuSE 9.2). Firewall is open on port 22 for local network. Even tried all open (in and outgoing). Between the clent and the firewall-bastion is another nat-router. Works with ssh, though. The

Hello, I'm trying to setup a chroot for one user on my AIX 5.2 system I have tried with openssh 5.0 (don't know where it comes from) and as it didn't work, I have downloaded and compiled the current version (6.6p1) When I connect, password is checked, chroot is done, sftp subsystem is accepted, but I get disconnected without any error Below is all can say about my config (after

Darren Tucker <dtucker at zip.com.au> writes: >That's a vendor-modified version of OpenSSH. Assuming it corresponds to >what's in FreeBSD head, there's about a thousand lines of changes. Ugh. >Can you reproduce the problem with an unmodified version from openssh.com? >Failing that, can you get the server-side debug output from a failing >connection (ie

Initially send this mail to user group. then realized this is more apt place. Apologies for posting in both groups... Hi all, We're using openssh version 4.7p on our linux 2.6-22 kernel. We have a Java based GUI that opens a secure shell connection to this linux box. To do something over the connection, the GUI opens a session (some times 3-4 simultaneous sessions) & once done, it will

Hello developers, some informations before I come to the problem: At work we're using Open-SSH 3.4p1 under Solaris 8. I compiled the Open-SSH by myself with gcc-3.1. In the gcc is the bounds checking patch included (http://web.inter.nl.net/hcc/Haj.Ten.Brugge/bounds-checking-gcc-3.1-1.01.patch.bz2). With this patch I compiled: - prngd 0.9.25 - zlib 1.1.4 - Open-SSL 0.9.6d Everything

Hi there, I have a weird problem with OpenSSH 2.9.9p2 on Solaris 8. Whenever I try to use ssh, scp or sftp to connect to the Solaris box, the connection is closed by the server and the following msg logged thru syslog: "sshd[542]: fatal: buffer_get: trying to get more bytes 129 than in buffer 39" I tried from an RH 7.1 client (2.9.9p2), from a Solaris 8 client (2.9.9p2), and an OpenBSD

I'm using an OpenBSD 2.9 snapshot on i386. "ssh -V" reveals OpenSSH_2.9, yada yada. I generated a keypair using ssh-keygen and accepting defaults. I copied the public key to another box, stuck it in ~/.ssh/authorized_keys with host restriction and then tried to use it. Failed. Removed the host restriction, still failed. Just get asked for password. So I cut out the extra box.

Team - I'm running Solaris 9 and gcc 3.1 on a Blade 1000, named jefferson. I built OpenSSH_3.3. I can use the client to connect out, but cannot use the client to connect to localhost (nor can I use a Linux box with OpenSSH_3.2.3 to connect to it). I *can* use F-Secure 3.0.0 on a Windoze box to get into it. I've tried configurations both with and without privsep enabled but get the same

Both systems are running RH 7.3 with a compiled copy of 3.4p1 with pam support enabled via configure root at vlan root]# ssh -v -v -v root at 207.62.147.3 OpenSSH_3.4p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f debug1: Reading configuration data /usr/local/etc/ssh_config debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1:

Just upgraded to OpenSSH_6.4 with OpenSSL 1.0.1e and libz.so.1.2.8. Now some (but not all) Cisco router logins hang: kraken> ssh -vv -l noc XXX-mgmt.gw OpenSSH_6.4, OpenSSL 1.0.1e 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 50: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to XXX-mgmt.gw [10.12.0.1] port 22.

5.1p1 disconnects after the password prompt when connecting to my router and UPS. 5.1p1 connects fine to other unix hosts, and my Windows client connects fine to 5.1p1 servers. 5.0p1 works fine everywhere. I've tried ssh -T, ssh -t, permutations with ssh -o Compression=no -o TCPKeepAlive=no, etc, to no avail. I've used the default ssh_config file, and it still fails. Can anyone

Hello, I recently compiled OpenSSH 4.0p1 with OpenSSL 0.9.7g on my Linux 2.6.11.3 machine. When I try to connect, the connection is immediately closed. When I setup public key authentication, I am able to login using my public key. However password authentication seems to be ignored. I attached debugging output from both the server and client. $ ssh -vvv localhost OpenSSH_4.0p1, OpenSSL 0.9.7g

Hi guys, I have a OpenSSH 3.4p1 installation on a SourceMage box, and I am trying to connect to a OpenSSH 3.3p1 installation on a RedHat 7.x box and any other machine. The client fails with a "Host key verification failed." Any other client connects correctly to the RedHat box, and any other server that I try to connect to from the SourceMage box fails with the same error message.

Dear Sirs, I have installed openssh-3.1p1 in a RedHat-7.1 server (By default openssh-2.5.2), I have not problem in the installation but when treatment to login to this server leaves the following message to me: root at 192.168.100.1's password: Permission denied (publickey,password,keyboard-interactive). I have seen the file sshd_config and if this qualified so that it can enter like root.

http://cvs-mirror.mozilla.org/webtools/bugzilla/show_bug.cgi?id=387 Summary: command="" in authorized_keys fails when sshd_config has "PermitRootLogon forced-commands-only" Product: Portable OpenSSH Version: -current Platform: All OS/Version: Linux Status: NEW Severity: major

I've recently upgraded our environment to OpenSSH-3.7.1p1 on Solaris, AIX and IRIX. I have had no luck when it comes to getting the IRIX environment to work. With sshd running on an IRIX server, I connect with any other version/OS ssh, watch the connection establish, get right up to the point where the shell should spawn and sshd terminates. I have been unable to find any information online

http://bugzilla.mindrot.org/show_bug.cgi?id=376 Summary: HostbasedAuthentication, followed snailbook but not working! :-( Product: Portable OpenSSH Version: -current Platform: UltraSparc URL: http://groups.google.com/groups?dq=&hl=en&lr=&ie=UTF-