km172 at daimlerchrysler.com
2003-Sep-24 19:07 UTC
sshd terminates a session after a successful login
I've recently upgraded our environment to OpenSSH-3.7.1p1 on Solaris, AIX
and IRIX. I have had no luck when it comes to getting the IRIX environment
to work. With sshd running on an IRIX server, I connect with any other
version/OS ssh, watch the connection establish, get right up to the point
where the shell should spawn and sshd terminates. I have been unable to
find any information online regarding this behavior and am looking for any
assistance possible. I upgraded the IRIX version to OpenSSH-3.7.1p2, but
the behavior still happens. Interestingly, OpenSSH-3.4p1 works properly in
this environment.
The servers are running IRIX 6.5.13m.
Please cc: me on any replies as I am not subscribed to this list.
Thanks in advance,
Ken Monville
(I'm running the new version on port 2200 for testing purposes, I have the
same result if it's on port 22 as well.)
IRIX sshd 3.7.1p2 output:
{root at dsm1} /etc/ssh2 % /usr/local/openssh-3.7.1p2/sbin/sshd -dd -f
/etc/ssh2/sshd_config
debug2: read_server_config: filename /etc/ssh2/sshd_config
debug1: sshd version OpenSSH_3.7.1p2
debug1: read PEM private key done: type DSA
debug1: private host key: #0 type 2 DSA
debug1: Bind to port 2200 on 0.0.0.0.
Server listening on 0.0.0.0 port 2200.
debug1: Server will not fork when running in debugging mode.
Connection from 53.233.36.117 port 42662
debug1: Client protocol version 2.0; client software version
OpenSSH_3.7.1p1
debug1: match: OpenSSH_3.7.1p1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.7.1p2
debug1: list_hostkey_types: ssh-dss
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent
debug2: dh_gen_key: priv key bits set: 136/256
debug2: bits set: 1602/3191
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT
debug2: bits set: 1607/3191
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: KEX done
debug1: userauth-request for user kjm service ssh-connection method none
debug1: attempt 0 failures 0
debug2: input_userauth_request: setting up authctxt for kjm
debug2: input_userauth_request: try method none
Failed none for kjm from 53.233.36.117 port 42662 ssh2
debug1: userauth-request for user kjm service ssh-connection method
publickey
debug1: attempt 1 failures 1
debug2: input_userauth_request: try method publickey
debug1: test whether pkalg/pkblob are acceptable
debug1: temporarily_use_uid: 2196/20 (e=0/0)
debug1: trying public key file /usr/people/kjm/.ssh/authorized_keys2
debug1: matching key found: file /usr/people/kjm/.ssh/authorized_keys2,
line 1
Found matching DSA key: 3f:00:1c:20:01:12:7e:be:ee:6b:4e:d8:cb:8a:b5:29
debug1: restore_uid: 0/0
debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss
Postponed publickey for kjm from 53.233.36.117 port 42662 ssh2
debug1: userauth-request for user kjm service ssh-connection method
publickey
debug1: attempt 2 failures 1
debug2: input_userauth_request: try method publickey
debug1: temporarily_use_uid: 2196/20 (e=0/0)
debug1: trying public key file /usr/people/kjm/.ssh/authorized_keys2
debug1: matching key found: file /usr/people/kjm/.ssh/authorized_keys2,
line 1
Found matching DSA key: 3f:00:1c:20:01:12:7e:be:ee:6b:4e:d8:cb:8a:b5:29
debug1: restore_uid: 0/0
debug1: ssh_dss_verify: signature correct
debug2: userauth_pubkey: authenticated 1 pkalg ssh-dss
Accepted publickey for kjm from 53.233.36.117 port 42662 ssh2
debug1: Entering interactive session for SSH2.
debug2: fd 3 setting O_NONBLOCK
debug2: fd 7 setting O_NONBLOCK
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 65536 max
16384
debug1: input_session_request
debug1: channel 0: new [server-session]
debug1: session_new: init
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_channel_req: channel 0 request pty-req reply 0
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req pty-req
debug1: Allocating pty.
debug1: session_pty_req: session 0 alloc /dev/ttyq2
debug1: server_input_channel_req: channel 0 request x11-req reply 0
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req x11-req
debug2: bind port 6010: Address already in use
debug2: fd 10 setting O_NONBLOCK
debug2: fd 10 is O_NONBLOCK
debug1: channel 1: new [X11 inet listener]
debug1: server_input_channel_req: channel 0 request shell reply 0
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req shell
debug2: fd 4 setting TCP_NODELAY
debug2: channel 0: rfd 9 isatty
debug2: fd 9 setting O_NONBLOCK
debug2: fd 8 is O_NONBLOCK
debug2: channel 0: read<=0 rfd 9 len 0
<<<<<<<<<<--------- Appears to be
where it is closing the connection?
debug1: Received SIGCHLD.
debug2: channel 0: read failed
debug2: channel 0: close_read
debug2: channel 0: input open -> drain
debug2: channel 0: ibuf empty
debug2: channel 0: send eof
debug2: channel 0: input drain -> closed
debug2: notify_done: reading
debug1: session_by_pid: pid 50804544
debug1: session_exit_message: session 0 channel 0 pid 50804544
debug2: channel 0: request exit-signal
debug1: session_exit_message: release channel 0
debug2: channel 0: write failed
debug2: channel 0: close_write
debug2: channel 0: output open -> closed
debug1: session_close: session 0 pid 50804544
debug1: session_pty_cleanup: session 0 release /dev/ttyq2
debug2: channel 0: send close
debug2: channel 0: rcvd close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: server-session, nchannels 2
Connection closed by 53.233.36.117
debug1: channel 1: free: X11 inet listener, nchannels 1
Closing connection to 53.233.36.117
Linux ssh 3.7.1p1 output:
{kjm at agusta} /home/kjm % ssh -vv -p 2200 dsm1
OpenSSH_3.7.1p1, SSH protocols 1.5/2.0, OpenSSL 0.9.7b 10 Apr 2003
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to dsm1 [152.116.117.24] port 2200.
debug1: Connection established.
debug1: identity file /home/kjm/.ssh/identity type -1
debug1: identity file /home/kjm/.ssh/id_rsa type -1
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug2: key_type_from_name: unknown key type '-----END'
debug1: identity file /home/kjm/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version
OpenSSH_3.7.1p2
debug1: match: OpenSSH_3.7.1p2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.7.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc
at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at
openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 132/256
debug2: bits set: 1625/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'dsm1' is known and matches the DSA host key.
debug1: Found key in /home/kjm/.ssh/known_hosts:188
debug2: bits set: 1627/3191
debug1: ssh_dss_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/kjm/.ssh/identity ((nil))
debug2: key: /home/kjm/.ssh/id_rsa ((nil))
debug2: key: /home/kjm/.ssh/id_dsa (0x8103d58)
debug1: Authentications that can continue:
publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/kjm/.ssh/identity
debug1: Trying private key: /home/kjm/.ssh/id_rsa
debug1: Offering public key: /home/kjm/.ssh/id_dsa
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433
debug2: input_userauth_pk_ok: fp
3f:00:1c:20:01:12:7e:be:ee:6b:4e:d8:cb:8a:b5:29
debug1: read PEM private key done: type DSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: ssh_session2_setup: id 0
debug2: channel 0: request pty-req
debug2: x11_get_proto: /usr/X11R6/bin/xauth list :0.0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req
debug2: channel 0: request shell
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Wed Sep 24 15:02:08 2003 from agusta.tcc.chrysler.com
<<<<<<------- Successful authentication? Then terminates...
debug1: permanently_set_uid: 2196/20
debug1: client_input_channel_req: channel 0 rtype exit-signal reply 0
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
Connection to dsm1 closed.
debug1: Transferred: stdin 0, stdout 0, stderr 28 bytes in 0.4 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 64.9
debug1: Exit status -1
--
Ken Monville - <km172 at daimlerchrysler.com>
DaimlerChrysler Corporation
Unix System Administrator - Unix Systems Management Group
Tel: 248.576.3842
km172 at daimlerchrysler.com wrote:> > I've recently upgraded our environment to OpenSSH-3.7.1p1 on Solaris, AIX > and IRIX. I have had no luck when it comes to getting the IRIX environment > to work. With sshd running on an IRIX server, I connect with any other > version/OS ssh, watch the connection establish, get right up to the point > where the shell should spawn and sshd terminates. I have been unable to > find any information online regarding this behavior and am looking for any > assistance possible. I upgraded the IRIX version to OpenSSH-3.7.1p2, but > the behavior still happens. Interestingly, OpenSSH-3.4p1 works properly in > this environment. > > The servers are running IRIX 6.5.13m.Hmm, I thought that problem has been fixed in openssh-3.7.1p2. Please post the server-side debugging (eg "sshd -ddd -p 2022" and "ssh -p 2022 localhost"). -- Darren Tucker (dtucker at zip.com.au) GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69 Good judgement comes with experience. Unfortunately, the experience usually comes from bad judgement.
km172 at daimlerchrysler.com
2003-Sep-25 12:54 UTC
sshd terminates a session after a successful login
Darren Tucker wrote:>Hmm, I thought that problem has been fixed in openssh-3.7.1p2. > >Please post the server-side debugging (eg "sshd -ddd -p 2022" and "ssh -p >2022 localhost").Server side debugging: debug3: Seeding PRNG from /usr/local/openssh-3.7.1 p2/libexec/ssh-rand-helper debug2: read_server_config: filename /etc/ssh/sshd_config debug1: sshd version OpenSSH_3.7.1p2 debug3: Not a RSA1 key file /etc/ssh/ssh_host_dsa_key. debug1: read PEM private key done: type DSA debug1: private host key: #0 type 2 DSA debug1: Bind to port 2200 on 0.0.0.0. Server listening on 0.0.0.0 port 2200. debug1: Server will not fork when running in debugging mode. Connection from 127.0.0.1 port 45662 debug1: Client protocol version 2.0; client software version OpenSSH_3.4p1 debug1: match: OpenSSH_3.4p1 pat OpenSSH_3.2*,OpenSSH_3.3*,OpenSSH_3.4*,OpenSSH_3.5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.7.1p2 debug1: list_hostkey_types: ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none debug2: kex_parse_kexinit: none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_init: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug2: mac_init: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug2: dh_gen_key: priv key bits set: 112/256 debug2: bits set: 1592/3191 debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug2: bits set: 1597/3191 debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user kjm service ssh-connection method none debug1: attempt 0 failures 0 debug3: allowed_user: today 12320 sp_expire -1 sp_lstchg 12026 sp_max -1 debug2: input_userauth_request: setting up authctxt for kjm debug2: input_userauth_request: try method none Failed none for kjm from 127.0.0.1 port 45662 ssh2 debug1: userauth-request for user kjm service ssh-connection method publickey debug1: attempt 1 failures 1 debug2: input_userauth_request: try method publickey debug1: test whether pkalg/pkblob are acceptable debug1: temporarily_use_uid: 2196/20 (e=0/0) debug1: trying public key file /usr/people/kjm/.ssh/authorized_keys2 debug3: secure_filename: checking '/usr/people/kjm/.ssh' debug3: secure_filename: checking '/usr/people/kjm' debug3: secure_filename: terminating check at '/usr/people/kjm' debug1: restore_uid: 0/0 debug2: key not found debug1: temporarily_use_uid: 2196/20 (e=0/0) debug1: trying public key file /usr/people/kjm/.ssh/authorized_keys2 debug3: secure_filename: checking '/usr/people/kjm/.ssh' debug3: secure_filename: checking '/usr/people/kjm' debug3: secure_filename: terminating check at '/usr/people/kjm' debug1: restore_uid: 0/0 debug2: key not found debug2: userauth_pubkey: authenticated 0 pkalg ssh-dss Failed publickey for kjm from 127.0.0.1 port 45662 ssh2 debug1: userauth-request for user kjm service ssh-connection method keyboard-interactive debug1: attempt 2 failures 2 debug2: input_userauth_request: try method keyboard-interactive debug1: keyboard-interactive devs debug1: auth2_challenge: user=kjm devsdebug1: kbdint_alloc: devices '' debug2: auth2_challenge_start: devices Failed keyboard-interactive for kjm from 127.0.0.1 port 45662 ssh2 debug1: userauth-request for user kjm service ssh-connection method password debug1: attempt 3 failures 3 debug2: input_userauth_request: try method password Accepted password for kjm from 127.0.0.1 port 45662 ssh2 debug1: Entering interactive session for SSH2. debug2: fd 3 setting O_NONBLOCK debug2: fd 7 setting O_NONBLOCK debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: init debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_channel_req: channel 0 request pty-req reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/ttyq5 debug3: tty_parse_modes: SSH2 n_bytes 266 debug3: tty_parse_modes: ospeed 38400 debug3: tty_parse_modes: ispeed 38400 debug3: tty_parse_modes: 1 3 debug3: tty_parse_modes: 2 28 debug3: tty_parse_modes: 3 127 debug3: tty_parse_modes: 4 21 debug3: tty_parse_modes: 5 4 debug3: tty_parse_modes: 6 0 debug3: tty_parse_modes: 7 0 debug3: tty_parse_modes: 8 17 debug3: tty_parse_modes: 9 19 debug3: tty_parse_modes: 10 26 debug3: tty_parse_modes: 11 0 debug3: tty_parse_modes: 12 18 debug3: tty_parse_modes: 13 23 debug3: tty_parse_modes: 14 22 debug3: tty_parse_modes: 16 0 debug3: tty_parse_modes: 18 15 debug3: tty_parse_modes: 30 0 debug3: tty_parse_modes: 31 0 debug3: tty_parse_modes: 32 0 debug3: tty_parse_modes: 33 0 debug3: tty_parse_modes: 34 0 debug3: tty_parse_modes: 35 0 debug3: tty_parse_modes: 36 1 debug3: tty_parse_modes: 37 0 debug3: tty_parse_modes: 38 1 debug3: tty_parse_modes: 39 0 debug3: tty_parse_modes: 40 0 debug3: tty_parse_modes: 41 0 debug3: tty_parse_modes: 50 1 debug3: tty_parse_modes: 51 1 debug3: tty_parse_modes: 52 0 debug3: tty_parse_modes: 53 1 debug3: tty_parse_modes: 54 1 debug3: tty_parse_modes: 55 1 debug3: tty_parse_modes: 56 0 debug3: tty_parse_modes: 57 0 debug3: tty_parse_modes: 58 0 debug3: tty_parse_modes: 59 1 debug3: tty_parse_modes: 60 1 debug3: tty_parse_modes: 61 1 debug3: tty_parse_modes: 62 0 debug3: tty_parse_modes: 70 1 debug3: tty_parse_modes: 71 0 debug3: tty_parse_modes: 72 1 debug3: tty_parse_modes: 73 0 debug3: tty_parse_modes: 74 0 debug3: tty_parse_modes: 75 0 debug3: tty_parse_modes: 90 1 debug3: tty_parse_modes: 91 1 debug3: tty_parse_modes: 92 0 debug3: tty_parse_modes: 93 0 debug1: server_input_channel_req: channel 0 request x11-req reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req x11-req debug1: X11 forwarding disabled in server configuration file. debug1: server_input_channel_req: channel 0 request shell reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug2: fd 4 setting TCP_NODELAY debug2: channel 0: rfd 9 isatty debug2: fd 9 setting O_NONBLOCK debug2: fd 8 is O_NONBLOCK debug2: channel 0: read<=0 rfd 9 len 0 debug1: Received SIGCHLD. debug2: channel 0: read failed debug2: channel 0: close_read debug2: channel 0: input open -> drain debug2: channel 0: ibuf empty debug2: channel 0: send eof debug2: channel 0: input drain -> closed debug2: notify_done: reading debug1: session_by_pid: pid 56395638 debug1: session_exit_message: session 0 channel 0 pid 56395638 debug2: channel 0: request exit-signal debug1: session_exit_message: release channel 0 debug2: channel 0: write failed debug2: channel 0: close_write debug2: channel 0: output open -> closed debug1: session_close: session 0 pid 56395638 debug1: session_pty_cleanup: session 0 release /dev/ttyq5 debug2: channel 0: send close debug3: channel 0: will not send data after close debug2: channel 0: rcvd close debug3: channel 0: will not send data after close debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: server-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 server-session (t4 r0 i3/0 o3/0 fd -1/-1) debug3: channel 0: close_fds r -1 w -1 e -1 Connection closed by 127.0.0.1 Closing connection to 127.0.0.1 -- Ken Monville - <km172 at daimlerchrysler.com> DaimlerChrysler Corporation Unix System Administrator - Unix Systems Management Group Tel: 248.576.3842