similar to: ssh port forwarding blocks in connect()

Hi, I get the following, having built openssh 3.0.1p1 on a linux system - this is the result of trying to ssh to localhost. OpenSSH_3.0.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090601f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Seeding random number generator debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: restore_uid debug1:

Hi, Folks ... Apologies in advance for the length of this message, but I wanted to be thorough, and provide as much info as I could. I'm trying to figure out a problem in trusted-host authentication using AIX hosts as clients, and a Sun host as the server; either I'm missing something real obvious, or there might be a bug somewhere in some piece of software involved here. -- All of

Dear all, I have a data.frame with some NAs that can happens anywere, and I would like to keep only rows without NAs. Thanks in advance for your help, and Merry Xmas. myvect<-runif(100) myvect[sample(1:100)[1:5]]<-NA myDF<-data.frame(matrix(myvect,ncol=5)) myDF miltinho [[alternative HTML version deleted]]

Hi Guys.. I am making an anoucement machine that is not allowed to "answer" the call due to a billing issue. I found that Playback with "noanwser" is usefull in this case. $AGI->exec('Playback',"$message","noanswer")} But when i request some values to the user with get_data, i think there is an answer anywere. Is there a way to get_data

Hello, Sorry if this question is a FAQ, but I don't find it anywere. Does klibc support dynamic linking ? TIA -- gpg key@ keyserver.linux.it: Goffredo Baroncelli (ghigo) <kreijack@inwind.it> Key fingerprint = CE3C 7E01 6782 30A3 5B87 87C0 BB86 505C 6B2A CFF9

I can not see how this could be a xen and/or amd64 problem but the evendence seem to point to it. I''m running ltsp under xen 3.4.2 64 bit dom0 on 5 servers. Noticed that on some systems that acroread always crashes when opening a pdf with a fillable form. I see no error messages anywere. Some domu are 32bit debian etch using pygrub. Some domu are 64 bit debian lenny using

Hello, I have a problem with ssh client. I have: SSH-2.0-OpenSSH_2.3.1p1 When I try to connect to a sshd server (USING V2): Remote protocol version 1.99, remote software version OpenSSH_2.5.2p2 or Remote protocol version 2.0, remote software version OpenSSH_3.0.1p1 I get error (looking at codebase): In sshconnect2.c: ssh_dhgex_client(kex, host, hostaddr, client_kexinit,

Add a note to the public headers regarding how to get the VCPU ID for HVM guests (on x86). Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Keir Fraser <keir@xen.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matt Wilson <msw@amazon.com> --- This is what Linux PVHVM does AFAIK, and also what I've been

Add a note to the public headers regarding how to get the VCPU ID for HVM guests (on x86). Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Matt Wilson <msw@amazon.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Keir Fraser <keir@xen.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matt Wilson <msw@amazon.com> --- This is what Linux PVHVM

Following Situation: Having an intranet-application that needs to know the ip-Address of the clients before running. Clients anywere in the Internet with any ip-address. So I thought about using masquerading the opposite way than normal. But then anybody could use this application. Dos anybody know how to make it a little bit more secure, like proofing the mac-address of the client, or something

Hello, where do you had downloaded the ocfs-2.4.9-e-1.0.9-8.src.rpm -Package and where can I find a working combination of fw-kernel and ocfs? We are testing under SLES8 and had linux-2.4.20rc2-orafw Kernel downloaded from otn and try to compile the ocfs-sourcen also downloaded from otn. Problem is, that Suse SLES8 works with kernel 2.4.19, so we can't recompile the ocfs-sourcen for kernel

--- "Olle E. Johansson" <oej@edvina.net> wrote: > From: "Olle E. Johansson" <oej@edvina.net> > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Asterisk on FreeBSD > Date: Mon, 27 Oct 2003 08:24:22 +0100 > > Rich Adamson wrote: > > >>My Asterisk (fresh CVS) takes 98% of the system load on my FreeBSD > server.

Hi! I've just searching the list archives but cannot solve my problem with mounting samba (v3.0) shares back on linux (RH 8.0 and 9). Mounting on Win clients works fine and any filenames (including long names with non-ascii chars and spaces) are perfictly supported and accessed. Mounting the share back on (even the same) linux box is a complex task. I use: mount -t smbfs -o guest

Hi After changing from samba 2.2.7 to 3.0.rc2 I can't get roaming profiles work. Clients Are W2K and XP. I've also switched from smbpasswd backend to ldap. Logon path is only set in smb.conf, not in ldap. Storing of profiles is working but it takes very long. I've tried logon path = \\wilma2\profile\Win2K and \\wilma2\profile. But the clients are always storing profile in

Hai, Ok, for the sysvol. I'll put all steps here again. I suggest start with this one. wget https://raw.githubusercontent.com/thctlo/samba4/master/samba-check-set-sysvol.sh This checks and set the rights to be known to be right. ( aka works great for me ) ;-) Then follow these steps. - login as dom\administrator. - start computer manager, connect to dc. - klik Shared Folders, Shares,

Hi I'm having huge problems with OpenSSH 3.0.1p1, compiled with OpenSSL 0.9.6b 9 Jul 2001 and running with prngd_0.9.23, it disconnects unexpectedly during client session due to bad packet length and corrupted MAC on input, according to debug anyway. What can cause this kinds of errors? I've verified that both se9104/server and switch runs in 100 Mbit full duplex and switch statstictics

Following the recommendation of Prof. Ripley, I have created the Makevars file with the line: PKG_LIBS="-L/usr/lib/libm -lm -L/usr/local/lib/libgsl -lgsl -L/usr/local/lib /libgslcblas -lgslcblas" in the working directory. Now I have the code file Example3.c which computes the Bessel function value (the example is taken from the GSL reference book). I am running: R CMD SHLIB Example3.c

NEW message w/ URL to zip archive containing debug output. Hi I'm having huge problems with OpenSSH 3.0.1p1, compiled with OpenSSL 0.9.6b 9 Jul 2001 and running with prngd_0.9.23, it disconnects unexpectedly during client session due to bad packet length and corruped MAC on input, according to debug anyway. What can cause this kinds of errors? I've verified that both se9104/server and

On 02/07/2018 05:01 AM, L.P.H. van Belle via samba wrote: > Hai, > > Ok, for the sysvol. > I'll put all steps here again. > > I suggest start with this one. > wget https://raw.githubusercontent.com/thctlo/samba4/master/samba-check-set-sysvol.sh > This checks and set the rights to be known to be right. ( aka works great for me ) ;-) > Thanks, but before I run that

Hi I need some help and am hoping you may be able to help me I have tried to install the latest 2.2.4 of samba with winbind and I am not geting anywere. This is what I have done I have installed Red Hat 7.2 cleanly on a system I have used RPM to remove all versions of samba that is installed Downloaded samba 2.2.4 extracted it then ran sh makerpms.sh created the smb.conf file with the following