similar to: compaq r4000 32 bit and 64 bit install

Hi I have a compaq R4000 with the 2.4GIG AMD 64 bit. 4000+ rated. proc cpuinfo reports cpu Mhz as 997.481 Do I have to run the 64 bit version to have things run correctly? I just have the normal 4.2 loaded at this time. The laptop seems slow for 4000+ as reflected by the cpu Mhz also. Any thoughts on running the 32 bit version of 4.2 vs the 64 bit version of 4.2? Jerry

I finally got the time to try the new kernel. recompiled it and now the compaq r4000 seems like an amd 64 4000+. THe issues of sloowww ness seemed to have gone away. Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051228/e8f151a7/attachment-0001.html>

Jerry Geis wrote: >/ I finally got the time to try the new kernel. />/ recompiled it and now the compaq r4000 seems like an amd 64 4000+. />/ />/ THe issues of sloowww ness seemed to have gone away. / >Which kernel did you end up with? >Cheers, Chris, The subject line mentioned 2.6.14.5, I downloaded it from kernel.org today. Jerry -------------- next part --------------

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW...

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ So I thought I would try those same options on my r4000 />/ laptop. they had no effect.... This AMD turion 64 4000+ />/ rating laptop is still running SLOWWW... />/ /proc/cpuinfo has the cpu Mhz running at 2393 / Yes, the 4000+ is 2.4GHz. >/ below is my dmesg output for

I am trying to install x86_64 on a compaq r4000 laptop. booting the CD I have tried text mode only and graphicaly mode. I see the normal stuff flying by and I just get a black screen (in text for graphic install). I have tried linux acpi=off apci=off nousb nopcmcia linux noprobe all result in the same black screen. Once the screen goes black the CD is still being accessed but the screen is

Anyone tried installing centos 4.2 on an compaq R4000? The CD boots, I hit enter, starts uncompressing the kernel detects my disks (last thing I see) then the screen is BLANK. I tried "linux text" also and exact same thing happens. THanks, Jerry

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

greetings pre centos install raid5 setup on a compaq dl380 is asking for stripe size. 16kb 32kb 64kb i am using one of the built in controllers and the machine has just a gig of ram and 4 18.2 gig 10,000 rpm drives machine will be an email server with simple web hosting as well. suggestions? thanks - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509)

From: Tony Wicks <tonyw at tonyw.com> > I run Centos on Compaq dl380g1/2/3's and Dell servers. While the > Compaqs are strong hardware they are old and frankly the performance > compared to modern (cheap or otherwise) hardware is not really that > impressive. A dual 1 gig P3 dl380 and ultra 3 scsi drives get significantly > out performed by a generic celeron with software

Ok, here's what iam trying on,, a compaq proliant 8500 server with 8 xeon 550mhz processors, 6 gig ram,, i just installed centos 4.1 on a proliant 3000 dual 550's and 2 gig ram and went smooth as silk, just got the 8500 and it seems to be in good order, but when i tried (twice) to install centos 4.1 it stalls shortly after a screen of stuff installing and the last two items are something

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

greetings, as most know i have some older dual processor Compaq playtoys that i am deploying CentOS 4 on and doing some real world'ish simulation of failure and regular server environment testing. i have searched www on some things to no avail so off to the experts for some guideance please? case of: a dual Pentium 3 processor 1850R with a smart array 221 controller and quantity (4) 18 Gig

Hi, LLVM already uses dynamic-programming based optimal pattern matching selectors for some of the target architectures. But as far as I know, the code is first converted out of the SSA form, before the selection process takes place. The same approach is used by many other compilers. But there is an article from Erik Eckstein, where a different method is proposed. In the described approach, the

I was wondering what the best practice is for setting up several SAMBA servers in a SAMBA domain all on the same LAN. Here is what I am looking at PDC: LDAP, Samba, nss_ldap, pam_ldap Member1: Samba, nss_ldap, pam_ldap Member2: Samba, nss_ldap, pam_ldap Member . . . . Should I set the member servers up with: Security = domain and join the severs with net rpc join or, whould it be better to set

Hello, I'm trying to sum up current options for doing small (up to 20 agents) inbound-only CC. I've found: astguiclient, maybe there are some other CC solutions? And on the other side: witch is better to have 20 PC w/ softphones or one T1 channel bank and normal phones with hands-free sets. (whitch set whould you recomend) ? kd, -- Krzysztof Drewicz Affordable 2/4 span E1/T1

For easy reading: http://www.karthaus.nl/r/ Hi, We used to have 1 single ip range (1.1.1.0/24) that had one uplink to a = switch of the colocation provider. Recently we got a second range 2.2.2.0/24 and a redundant uplink = directly on two routers. But our switch does not have spanning tree = protocol support so we cannot use them redundantly. We have set up the switch to have a vlan for both

Hi I just "stumbled" over the flags settings in pam_password_change_required(). As far as I looked over the OpenSSH code, setting/resetting the 2nd bit in those flags from auth-options.c whould only make sense if the flags are checked to be 0/1 in the remaining OpenSSH code. Frank

Hello, Maybe I am not understanding how negative indexing works but 1) This is right. (1:10)[-1] #[1] 2 3 4 5 6 7 8 9 10 2) Are these right? They are at least surprising to me. (1:10)[-0] #integer(0) (1:10)[-seq_len(0)] #integer(0) It was the last example that made me ask, seq_len(0) whould avoid an if/else or something similar. Thanks in advance, Rui Barradas

I am trying to install mySQL 1.41 from the ports tree, but it hangs. He says that: "The host 'hostname' could not be looked up." I changet the hostname to the correct one. $ hostname server.com And it still hangs and says this error. It said that --force whould do it, but I don't know how to do this.... :( I tried: $ make install --force But it didn't work... Please help!