similar to: compaq r4000

Hi I have a compaq R4000 with the 2.4GIG AMD 64 bit. 4000+ rated. proc cpuinfo reports cpu Mhz as 997.481 Do I have to run the 64 bit version to have things run correctly? I just have the normal 4.2 loaded at this time. The laptop seems slow for 4000+ as reflected by the cpu Mhz also. Any thoughts on running the 32 bit version of 4.2 vs the 64 bit version of 4.2? Jerry

Jerry Geis wrote: >/ I finally got the time to try the new kernel. />/ recompiled it and now the compaq r4000 seems like an amd 64 4000+. />/ />/ THe issues of sloowww ness seemed to have gone away. / >Which kernel did you end up with? >Cheers, Chris, The subject line mentioned 2.6.14.5, I downloaded it from kernel.org today. Jerry -------------- next part --------------

I am trying to install x86_64 on a compaq r4000 laptop. booting the CD I have tried text mode only and graphicaly mode. I see the normal stuff flying by and I just get a black screen (in text for graphic install). I have tried linux acpi=off apci=off nousb nopcmcia linux noprobe all result in the same black screen. Once the screen goes black the CD is still being accessed but the screen is

I finally got the time to try the new kernel. recompiled it and now the compaq r4000 seems like an amd 64 4000+. THe issues of sloowww ness seemed to have gone away. Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20051228/e8f151a7/attachment-0001.html>

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW...

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ So I thought I would try those same options on my r4000 />/ laptop. they had no effect.... This AMD turion 64 4000+ />/ rating laptop is still running SLOWWW... />/ /proc/cpuinfo has the cpu Mhz running at 2393 / Yes, the 4000+ is 2.4GHz. >/ below is my dmesg output for

Gents, I first installed the 32 bit version (as you might have read) of centos 4.2, after downloading x86_64 the install process/progress is about the same. going VERY slow... The screen for formatting the partitions took a LONG time (3 partitions 10 GIG, 2 GIG swap and 50 GIG). While on that screen and moving the mouse it lagged big time and could not keep up. Anyway just reporting that so far

Chris, I have a compaq AMD r4000 x86_64. grabbing the latest kernel and compiling it fixed my clock skew. I have not had any slow disk issues. again the kernel may help doing the command: killall -SIGUSR1 cpuspeed makes the CPU run faster. Hope that helps. Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

Is there a location for centos 4.2 that has a current kernel compiled and ready to just install for the 2.6.14.X kernel? I am wondering if a current kernel helps with my slowww compaq r4000 amd64 machine. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a compaq V2000 laptop. Specs for network say its a realtek 8139/8139C+ NIC. Other distros (namely suse) said there was no problem with this was detected and worked. Mine does not work on either of the 2 V2000 laptops I have. I tried manually loading the 8139cp module then restarting the network and that did not do it. Any ideas? Jerry

Hi Has anyone got a Compaq(/HP) T700 UPS to work with the BCMXCP driver? I've built yesterday's CVS of NUT 2.1 on one of my FreeBSD systems but chown root:wheel /dev/cuaa0 /usr/local/libexec/upsdrvctl -u root start gives: -- Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Communications with UPS lost: Error executing command

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Hi, />/ I have a compaq V2000 laptop. Specs for network say its a />/ realtek 8139/8139C+ NIC. / Is it really a RTL8139? Or it is possible that it's a RTL8100? The reason I ask is because while the RTL8100 is supposed to be MAC compatible with the RTL8139, I'm finding

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

greetings i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on them before a CentOS 4 load i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am wondering which specific smartstart download i should be using for them from this URL below h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp would someone please share their experience

Good day all, I've recently added a new piece of hardware to my collection - it's a Compaq Proliant 1600R with a Smart Array 2DH controller and dual processors. Unfortunately these features don't seem to play well together. Installing FreeBSD 4.8 was very smooth. After doing a CVSup, one of my first tasks was to compile a new kernel with SMP support. The compile went fine, but when I

Hi, I''m trying to boot xen dom0 on a Compaq Proliant 2500 but so far I have been unsuccessful, I get (XEN) Not enough memory to stash the DOM0 kernel image. On a normal linux 2.6 kernel to boot I have pass "memmap=exactmap memmap=640K@0 memmap=319M@1M" to the kernel at boot otherwise it hangs because of the way Compaq Bios reports the system memory. I''ve tryed to use

I have been using the LEAF Bering firewall for a year or so. It boots with Syslinux 1.75. But Bering is too large for a 1440KB floppy, so it formats the diskette as 1680KB. Recently I found a small Compaq 2266 box to replace a larger Compaq 7170 to run the firewall. But when I try to boot the Bering diskette on the 2266 I get the following message: Loading Linux ............ Boot failed:

I'm using OpenSSH_3.5p1 (server protocol 2.0 ) on a Compaq device V5.1A with C2 Security (SIA) configured. I must set UsePrivilegeSeparation to no to get this working. Does anyone have PrivilegeSeparation working on a Compaq device with C2 Security configured? Source device: ssh user at destination ( produces these errors) sshd: /var/tcb/files/__db_lock.share: Permission denied sshd:

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion