similar to: new dell B120 laptop

>/Jerry Geis wrote: />// I am installing 4.2 on the new dell $499 B120 laptop. //>/ Centos installs just fine. however, when rebooting />/ it is starting udev and then says Disabling IRQ#11 and stops. />/ />/ Any ideas on why that would be?? />/ / >/Do you have a USB devices plugged in? I reinstalled CentOS 4.2 on my />/laptop this past weekend. I forgot to unplug my

Hi, OSOL, b118 > milek at r600:~# flowadm show-flow > FLOW LINK IPADDR PROTO PORT > DSFLD > local_25 iwh0 -- tcp 25 -- > local_22 iwh0 -- tcp 22 -- > milek at r600:~# flowadm show-flow -s -i 1 > FLOW IPACKETS RBYTES IERRORS

I have a dell inspiron 8200 laptop running centos 4.1 just fine. I want to connect it to an external 32 inch LCD. This laptop is dual boot windows. I set windows up to 1024x768 and connected the LCD - it worked just fine. LCD max is 1333x768 I then booted Centos 4.1 and set X to be 1024x768 also. rebooted the laptop just ot make sure. I then connected the LCD and it says can't display

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

I have changed over to CentOS5 on some of our computers. I had been using Mandriva 2006 and the nut software worked using: driver = newhidups port = auto Using the same version of nut with the same config files on CentOS5, I get the following error output from 'upsdrvctl': Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.4) No

Is there a way on Dell R320 (two power supplies and hardware RAID-1) on centos to get a message that a power supply is failing or that one of the hardware RAID disks is failing? Sure there is the front panel - but no-one is there ... Is that reported to linux/centos some way? This is my first R320. Thanks, Jerry

Hi, I've posted this on Ubuntu forums as well, but I'd like this communities input. Has anyone experienced this before? Note that DW8 is the only Windows program I use... Help with gnome panel freezing Ubuntu 10.04 Kernel 2.6.32-32-generic Dell D620 I really have searched for a solution, but none of them matched mine. This is the problem: At least once a day my desktop freezes. I can

I am running Xen 4 and want users to be able to install arbitrary HVM images. We want both PV and emulated drivers to appear. The reason for this is for compatibility with images that were prepared for Xen 3.3, which assume emulated devices exist at boot time (particularly for running the boot loader). If I do not specify on the boot line xen_emul_unplug=never, then under some guest OS''s

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Greetings Charles; Following the chapter 6, configuration notes, and having configured everything I had done previously in the repo built /etc/nut directory without any success previously, I found when trying: /usr/local/ups/upsdvrctl start, It reported it couldn't open /usr/local/ups/etc/ups.conf So I copied what I had done before to that path by mv'ing them with mc. Then I checked

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

Hi All - I have a Dell R430 server running CentOS 7.5 that is dropping packets on the network. Its connected to Cisco switch at AUTO for the port. The server reports 1000M on the network. I even changed the setting for the switch to 1000M full, that did not seem to make a difference either. What else might I look at as to why its dropping packets? Its mainly 90'ish percent idle. so not

https://bugs.freedesktop.org/show_bug.cgi?id=37669 Summary: [NVAC] problem when disabling external monitor Product: xorg Version: unspecified Platform: Other OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

The problem is that I have only 2 ethernet adapters in my linux router, one of this adapter pluged to the LAN and the other is pluged to a HUB who have 2 routers DSL. Each DSL routers have an static ip and the solution that I found was creating an eth0 and eth0:1 but with this option I have any way to use the eth0:1 adapte... Any one knows a solution for this ? Regards.

Odd thing happened... A centos 7 install set for DHCP. boot the box no network connected. I let it like this overnight. I come in this morning and plug in the network. Is it supposed to get a DHCP address at that time ? It did not . service network restart did get an address. if I unplug the network, reboot the box, want a minute or so - then plug the network in - it gets a DHCP address. Is

A customer of mine has 3 TDM400P cards in a box running asterisk. On each card he has four FXO modules. I have set up the dialplan to dial via group 1 for an outgoing call. Channels 1-12 are in group 1. If he plugs a telephone cable into socket 2 or 3 etc, but not 1, when he dials out, it still tries to make the call via socket 1. Straight away the console says that it has dialed the

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Hi guys, when I detach an interface from vm during boot (vm boot not finished), it always fail. I'm not sure if there is an existing bug. I have confirmed with someone that for disk, there is similar behavior, if this is also acceptable? # virsh destroy rhel7.2; virsh start rhel7.2 ;sleep 2; virsh detach-interface rhel7.2 network 52:54:00:98:c4:a0; sleep 2; virsh dumpxml rhel7.2 |grep

https://bugs.freedesktop.org/show_bug.cgi?id=56615 Priority: medium Bug ID: 56615 Assignee: nouveau at lists.freedesktop.org Summary: Unable to start X on ThinkPad T420s laptop QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: mark.cave-ayland at

Hi, I have 2 samba4.0.5 DC controllers running ubuntu 12.04 in my network which are in sync. Everything works fine but I still get the following error on the first samba4 DC I installed when running /usr/local/samba/sbin/samba -i Failed to bind to uuid e3514235-4b06-11d1-ab04-00c04fc2dcd2 for e3514235-4b06-11d1-ab04-00c04fc2dcd2 at ncacn_ip_tcp