similar to: Adaptec adp94xx - anyone using it?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 1) Has anyone been able to get their AIC-9410 controller recognized in CentOS 5.3? I'm working with a Supermicro X7DBR-3 motherboard. It has 2 "ICH Raid Codebase" options in the Bios (Intel and Adaptec); neither of which seem to change Linux's behavior. The interesting part though, choosing either Adaptec or Intel, then performing

I'm trying to get the RHEL-5 version of their kernel driver to install with no luck so far. http://www.adaptec.com/en-US/support/scsi/u320/ASC-39320A-R/ Here is what I'm seeing when I install their provided .RPM: [root at hcnas ~]# rpm -i a320raid.rhel5.i686.rpm Adaptec adp94xx driver installer - V1.2.5934.0-1 Backing up all modified files to /boot/adp94xx-backup-4 Using GRUB

I have a server with Super Micro X7DB3 motherboard and Adaptech AIC-9410 controller (http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DB3.cfm). The hard disk is single SeaGate SAS disk (300Gb). I'd like to install CentOS 7 on the server, but unfortunately, the CentOS installer can't find any hard disk. I think the problem maybe caused by the disk controller. Can you please

I'm having speed problems with the SCSI card we're using to do tape backup. It seems to be functioning in 16 bit mode and the current thinking is that perhaps it's using a legacy driver instead of the correct one. The Adaptec site has a 'driver' for RHEL5 which I've downloaded and tried to install but it seems to have a problem installing on a CentOS-5 system. [root at

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

--> Requote: Trying to install Centos 4.3 on IBM eseries with Adaptec 9405 SAS. Fail to install / recognized SAS. Download from IBM RHE4 driver unfortunately did not help. Then I install RHEL 4 / SLES 9 - Running fine. SAS was installed and recognized. Anybody have any idea? -- ----------- ( ) ?( (.) (.) )? ---o000o-(_)-o000o--- Mahayudin Mohd Hashim

I have a Supermicro SuperServer 6025B-3V with their X7DB3 mobo. It has an onboard Adaptec SAS RAID controller and has been configured as a RAID1 with two Seagate Cheetah 15k.4 disks. Original attempts at installing CentOS4.4 x86_64 appeared to load the aic94xx driver, but then reported something like "No hard drives found...". I grabbed the x86_64 aacraid driver disk from Adaptec

Trying to install on IBM eseries with Adaptec 9405 SAS. Fail to install / recognized SAS. Download from IBM RHE4 driver ... unfortunately did not help. Anybody have any idea? -- ----------- ( ) ?( (.) (.) )? ---o000o-(_)-o000o--- Mahayudin Mohd Hashim Kuantan Port Consortium Sdn Bhd Wisma KPC, KM 25 Tanjung Gelang PO Box 199 25720 Kuantan, PAHANG MALAYSIA Vox :

Good Day! We have some troubles with installation of CentOS 5.0 on Supermicro server with Adaptec AIC-9410 SAS Controller, but installation complete successfully on CentOS 4.5. This issue has been solved in version 5.2? Or it will be solved in version 5.3? Sorry for my English ;( -- wbr - Maxim Odinintsev

Hi, I want to compile the kernel for supermicro server . I need the SATA controller support(adp94xx.o). Where i can get the source code of linux kernel 2.6.9 with the support of above mentioned driver ?? Thanks in advance Regards juliet

Hi: I've tried to install centos 4.3 in a raid array, setuped on bios as mode "Adaptec". The chip is ICH7R but centos always sees 2 drives instead of the array that I create. I've contacted Supermicro support and they gave me this link ftp://ftp.supermicro.com/driver/SATA/Adaptec_ICH7R/Linux/Redhat/ , but the disk drivers I tried to use with centos 4.3 did not work, saying that

Hello, I just recently purchased two new Supermicro servers: SYS-6025B-3R SYS-6015B-3R Both of these have an Adaptec AIC-9410 SAS controller in them, that is apparently not detected (or supported?) by FreeBSD (amd64) (7.0 or 7.1 RC1) Is there any way to get FreeBSD to detect this controller (and drives on it)? I found some conversations from 2006 about this, but no updates since. Thanks in

Hello I'm running centos 3 and a raid 5 array running in good order however I'm trying to install some monitoring for the raid array using dptapps-static-3.1.24-1.i386.rpm and run it but this fails: [root at ns1 Scripts]# /usr/dpt/raidutil -L physical osdIOrequest : File /dev/dpti17 Could Not Be Opened Engine connect failed: COMPATIBILITY number Has anyone a rpm for a supermicro

So, having returned from a month's vacation, I'm back to work on attempting to build a set of small form factor CentOS compatible computers. I've really tried to do my homework, but this doesn't appear (at first glance) to be at all easy. It's not made easier by the fact that I have to get it right the first time (and I haven't built a PC in a decade); the time and money

Package: xen-hypervisor-4.1-amd64 Version: 4.1.4-3+deb7u1 Severity: important Dear Maintainer, We are having a problem on several Supermicro servers (I'll include more details on the configuration later) : when booting Linux 3.2 linux-image-3.2.0-4-amd64 (Wheezy) as a DOM0 on Xen 4.1 (xen-hypervisor-4.1-amd64 from Wheezy), the system hangs after : [ 3.716174] scsi1 : ata_piix [

hi, i have new supermicro server (centos5, 2.6.30.9/2.6.27.34/2.6.18-distro kernels, wanpipe 3.5.6) card is: 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=11 : CPU=A : PORT=1 : HWEC=32 : V=36 and i have this in log irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.30.9rh #1 Call Trace: [<c0465b07>] __report_bad_irq+0x27/0x90

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

Greetings, Wondering if anyone could assist with this. I have many SuperMicro 5015B-MTB servers. These all have the X7SBi Motherboards. After upgrading to CentOS 5.3 the Hard Drive LED's on some of the servers started blinking red(drive fail) but all is functioning normally. All servers are running raid 1 arrays with MDADM. Primary drive does not blink, but all others do including spares.

Hello, is anybody using this controller with opensolaris/snv ? http://www.adaptec.com/de-DE/products/Controllers/Hardware/sas/entry/SAS-2405/ does it run out of the box ? how does it perform with zfs? (especially when using it for zfs/nfs esx setup) the driver from adaptec is for solaris 10 u4. If it does not work out of the box, can i use that driver with opensolaris/snv ? thanks roland --

I am posting this as I was researching an issue with my Adaptec 2200s controller, where I would get command timeouts on the controller under heavy constant load (either using rsync or ncftp to mirror folders). I noticed some interesting information that Scott Long posted about issues with 4GB RAM and the firmware. Well, I have 4GB of RAM, and a SuperMicro X5DPL-iGM mobo (intel 7501 chipset), and