similar to: Has anyone had success getting on-board sound to work on a Tyan S2895?

It seems that unstable PowerNow support on the Tyan S2895 is not limited to Linux according to this review: http://www.hardcoreware.net/reviews/review-296-1.htm Their solution was to upgrade the BIOS as well. -- Bryan J. Smith b.j.smith at ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT

Hi All, I've just started caring for a dual Opteron machine. It has a 3Ware 9500S-12 RAID controller, a Tyan S2882G3NR motherboard, 10 IBM 400GB disk drives, and a 650 watt power supply. It has been behaving itself quite nicely until recently. The poor behavior started when I upgraded the OS from CentOS 4.1 (32 bit) to Centos 4.1 (x86_64). When running in uniprocessor mode, the system

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

I tried updating the BIOS on my K8WE (S2895) yesterday to 1.03, but after the update, FreeBSD (RELENG_6 dated March 26) would randomly freeze after booting. As I was updating from v1.01, I suspect it may be the updates to the nVidia SATA firmware that caused the issue, as things generally froze shortly after the background fsck processed kicked in (with, obviously, the exception of the first

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

From: "Bryan J. Smith <b.j.smith at ieee.org>" <thebs413 at earthlink.net> > I wrote a pre-sale evaluation back in January 2005 here: > http://lists.leap-cf.org/pipermail/leaplist/2005-January/000532.html > ... Tyan S2895 -- nForce Pro 2200+2050 Just know that the pre-sale evaluation was of the nForce4, and didn't take the nForce Pro 2200 and 2200+2050

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

I've been planning to build a dual Opteron server for awhile. I'd like to get people's suggestions on a suitable motherboard. I've looked at the Tyan K8SE (S2892) and K8SRE (S2891) but would like to find more Linux-specific experiences with these boards. Some features I expect are at least 4 SATA (SATA-300?) ports, serial console support in the BIOS, USB 2.0 and IEEE-1394

Hello I have at this time a w3are 7006-2 controller in my server Dual Xenon 2.8Ghz . But now i will change it to a 9500S-4LP SATA Raid Controller. I have seen in lsmod that the 7000 driver is loaded. scsi_mod 115112 3 [sg 3w-xxxx sd_mod] My question Is it possible to running this card with centos 3.3? I have seen this at 3ware http://www.3ware.com/KB/article.aspx?id=12706 But

I want to know if I buy a Tyan Transport GX28 (B2881) will it work with a TDM400 card? As the expansion slots are only (2) 64-bit 133/100MHz PCI-X. I never tried PCI 2.2 compliant card in a PCI-X slot so I don't know if it can even fit in the slot and if it does will it be seen? Thanks Martin Roy

Was wondering if anyone has any luck with the Tyan s4985 motherboard, I had loaded up the latest 5.4 release and in installed most everything that I wanted but when I loaded it up, as in processor wise it would lock up. Funny thing I could still ssh to it but not do a su - or anything from the console. I think it is kernel related and tried the previous kernel but it still exhibited the same

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

A couple of months ago I reported some problems with a batch of Tyan K8SSA (S3870) based machines. We are continuing to have an odd problem with these boxes, and if anyone has seen something similar elsewhere, I'd appreciate hearing about it. These boxes are running Centos 4.4 x86_64 with kernel 2.6.9-42.0.3.ELsmp. They are dual Opteron 265's (dual core) with 4x2GB DIMM's. The

We've had a spate of these lately - about 3 or 4 boxes. I have a feeling we just got a bad run of motherboards, but thought I'd try to get some feedback. These are servers running with the Tyan Thunder K8SD (dual core AMD's, S2882 model). They have three onboard NIC's, two Broadcom gig NIC's BCM5704C's and an Intel 82551QM which is a 10/100 board. We use the

Hi Everybody, Does anyone could install CentOS 4.4 on Tyan Teledo i3010w (S5197) successfully ? without any kernel parameter when boot up. I haven't buy it yet. But I want to make sure it works with CentOS 4.4. Thanks. Ceg Ryan -------------- next part -------------- An HTML attachment was scrubbed... URL:

Been picking brains on IRC for a few days, but we still don''t have this one figured out. The boot setup that I''m using on a ASUS board with a Phenom processor works perfectly. I take that same configuration and try to boot this Tyan/Barcelona setup and it freezes when grub (or pxe/isolinux ) passes control to the hypervisor. http://www.gaealink.net/not-very-xen.png