similar to: can't boot from install cd

Hello everyone I have a quite weird problem, and I've try a lot of possibility without any success. It's about file transfert beetween a Windows 2000/98/ME and a Samba PDC. I've made some tests with a Win 2K PDC too. Oh yes, English isn't my native language, so please excuse me in advance for my *bad* english. I'll try to be the most complete I can, so this post may be a

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Good day. Thanks in advance for any help. I have a Tyan S2895 (Thunder K8WE) with 2 275 Opterons and the latest (1.02) bios. It appears to have an nVidia nForce SATA chipset which connects to a 250gb WD Caviar SATA drive. Using the CentOS 4 update 2 x86_64 DVD, the install is peachy until half-way through the "performing post install configuration" bit. Then it hangs forever. I

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

Greetings, I have several Tyan S2518UGN (Thunder LE-T) server boards that I've been running for a few yrs. I've always used the SCSI on them, so never really used the ATA ports. I once experimented dual-booting NT2003 & FBSD on one of the ATA ports about a year ago. But ran into the problem I'm running into now. Back then I just blamed it on the drive (even tho it was brand new,

Hi- I'm looking for an appropriate system board to power a system with two (2) Digium TE410P cards. Since these cards require the 3.3 volt PCI, I'm considering vendors like Tyan for the motherboard. Can anyone please tell me their experiences with the Tyan i7501 series (Xeon-basd), or recommend an alternate motherboard? Thanks Scott Scott M. Stingel Emerging Voice Technology Inc.

We have been seeing failures with CentOS 4.4 i386 (not x86_64) running compute-intensive programs on Tyan K8SRE (S2891) Tymotherboards, running Opteron 265's. This motherboard is used in the Tyan barebones box GT24 (B2881). We have these boards populated with 8GB of RAM, consisting of mixed 2GB and 1GB sticks. The symptom is that CPU-bound programs (may or may not be related to floating

Dear list, is anyone using a Tyan Thunder K8HM (S3892) with Xen? Or can recommand a (different) mainboard for: - dual dual-core opteron - about 16GB of RAM - two Gbit ports (for GNBD) - one (or more) SATA ports (system disk) - at last one PCI-X 133 slot. Thanks a lot. -- /"\ Goetz Bock at blacknet dot de -- secure mobile Linux everNETting \ / (c) 2006 Creative Commons,

We're having problems with FreeBSD 5.4, 6.0, and 6.1 and an ICP Vortex GDT8546RZ 4 port SATA RAID card in a Tyan S2460 system with dual AMD Athlon MP 1600+ CPUs. We do not have any problems with this configuration under FreeBSD 4.11, and we have the same ICP cards in Tyan based Opterion system (S2882 and S4882) run with out problems under FreeBSD 5.4 and 6.1. We can reproduce the problem on

Does anyone have any experience with Super-Micro brand motherboards // dual Xeon cpu's? Had to swap out my Tyan piece of junk and going back with the S-M board. I believe it has similar north/southbridge chips on it -- at least they are the intel MCH ICH5R and PXH plus the 82546GB. One area that the Tyan board was seriously lacking in was in the hardware monitoring department. The S-M

Dear Sirs. It seems to me a never ending story. We run a box with a TYAN Thunder 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit) GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this state was really hard! It is a story similar to that what happend when we changed towards FreeBSD

I am trying to install CentOS to a server that has a Tyan S2891 motherboard, 2 Opteron 875 Dual Cores and 2GB of RAM. I have been able trying to install over a network but the tg3 driver will not load. I then installed from a DVD and on rebooting after the installation I cannot get the network drivers to load and the RAID controller in the PCI slot is not available. It seems that when I do an

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by

http://bugzilla.mindrot.org/show_bug.cgi?id=510 Summary: corrupted mac address disconnecting Product: Portable OpenSSH Version: -current Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P1 Component: ssh AssignedTo: openssh-unix-dev at mindrot.org ReportedBy:

Folks- I have had a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset --

I am playing with a new machine I just got in and it is dying on boot... I'm wondering if it is to much machine for Centos to run.. It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board. The error I'm seeing is on

A couple of months ago I reported some problems with a batch of Tyan K8SSA (S3870) based machines. We are continuing to have an odd problem with these boxes, and if anyone has seen something similar elsewhere, I'd appreciate hearing about it. These boxes are running Centos 4.4 x86_64 with kernel 2.6.9-42.0.3.ELsmp. They are dual Opteron 265's (dual core) with 4x2GB DIMM's. The