similar to: PXELINUX fall to exit PXE ROM

Hi, We have a HP DL385 G6 server that is having an issue. Two of the 4 network cards are not being recognised by Linux. We have quite a few other servers with the same hardware and no issues but, before I call HP, I would like to make sure that I am not doing anything wrong :) I have tried with the kernel that came with CentOS 5.5 and the updated one kernel-2.6.18-194.11.3. I do an lspci

Hi, I've got a question regarding pxelinux: It seems that there is a buck in syslinux 3.86 (or still is in the current build) in the reset_pxe function. If I call "syslinux_local_boot(0)" (in a COM32 binary) the KeepPXE variable is always 1 which resets the PXE stack instead of unloading it: local_boot: push cs pop ds mov [LocalBootType],ax call vgaclearmode mov

Hi, [This is an automated email] This commit has been processed because it contains a -stable tag. The stable tag indicates that it's relevant for the following trees: all The bot has tested the following trees: v5.2.2, v5.1.19, v4.19.60, v4.14.134, v4.9.186, v4.4.186. v5.2.2: Build OK! v5.1.19: Build OK! v4.19.60: Build OK! v4.14.134: Build OK! v4.9.186: Failed to apply! Possible

Hi, tuning my network fixing nic's speed and duplex (both on server and switch) i got this error with bce driver: # ifconfig bce0 bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> ether 00:15:c5:fe:11:01 inet 192.168.1.13 netmask 0xffffff00 broadcast

Hi all, After finding multiples answers to this question via google, but without making it work on my servers. Has anybody iSCSI Offload working on a Dell Server with Broadcom NICs ? My environment: I'm running CentOS 5.6 CR, on a Dell PowerEdge R710 with Broadcom Corporation NetXtreme II BCM5709 conecting to an EMC CX4-120 SAN, via 2x Cisco 2960G-24TC-L switches. It's working

Hi Guys, I am trying to add a Broadcom Physical NIC to a virtual Machine as Passthrough device. However I am getting following error. Error starting domain: unsupported configuration: host doesn't support passthrough of host PCI devices Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper

Hi, I need to fit at least three NICs and I was looking for motherboard models that contain 3 or 4 CPI (or PCI-e) slots and works with CentOS. I had a problem in the past with some models that had a bug and did not work well with linux (ok with windows) so that's way I am asking this here. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have been using xen under open-suse 11.4 for almost half an year now. This week I had to reformat the provider and so I did install everything again (now there is a dual boot and microsoft windows server 2008 installed on the first half partition of the disk) again open-suse 11.4 and xen. I do start the xen kernel at grub but when I try to connect and/or creat a new domU the folling

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu

This is another attempt at fixing an issue with yes | sensors-detect Causing some machines with nouveau loaded to hang if certain kinds of displays are attached. I've also included one minor fix that I found along the way of troubleshooting this issue. Lyude Paul (2): drm/nouveau: Fix missing elses in g94_i2c_aux_xfer drm/nouveau: Don't retry infinitely when receiving no data on i2c

It appears that the 3.74 completely broke the "keeppxe" directive -- not due to the command-line parser, but due to mishandling of the flag later. I consider this to be severe enough to do a short-cycle 3.75. As a result, I would like help with: a) are there any other bugs that snuck through? b) once I have a 3.75-pre1, I would really appreciate help testing it. The goal is to have

Package: xen-hypervisor-3.4-amd64 and linux-image-2.6.32-5-xen-amd64 Version: 3.4.3-1 and 2.6.32-15 Hello all, GRUB-PC does not automatically populate Xen related parameters in /boot/grub/grub.cfg so I added them manually (see below). All the packages involved on my Dell PowerEdge R710 running Debian GNU/Linux Squeeze AMD64 are from the Squeeze repository. There are four (4) 1TB SATA HDD

Hi, I''ve been trying to boot stefano''s minimal dom0 kernel from git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 2.6.36-rc1-initial-domain-v2+pat On xen-unstable, I get the following WARN_ON()''s from Xen when bringing up the NIC''s, then the machine hangs forever when trying to login either over serial or NIC. (XEN) Xen WARN at msi.c:649 (XEN) ----[

I''ve seen the Nexenta and EON webpages, but I''m not looking to build my own. Is there anything out there I can just buy? -Kyle

Has anyone managed to get CentOS 6 x86_64 running on a server with a Broadcom NetXtremeII BCM5709 network adaptor? If so have you seen any issues with the network freezing? On booting everything works fine then the network will just stop - can't ping anything. If we manually restart the network service it will run again for a few seconds/minutes before hanging again. We have even installed the

The behaviour of default ISRs as provided by the BIOS varies wildly between platforms. Some will simply iret, some will send EOI, some will send EOI and disable the interrupt at the PIC, some will crash the machine due to single-bit errors in the ISR address. When PXENV_UNDI_ISR_IN_START returns PXENV_UNDI_ISR_OUT_NOT_OURS, send the EOI ourselves rather than risking the unpredictable behaviour

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was

Hi guys, i have 4 Xen servers, two with Xen 3.2.1 and the other two with Xen 4. All four servers with 3 network card attached to different networks, 3 of these interfaces are bridges (configured in the ''/etc/network/interfaces'' config file, NOT in xend-config.sxp file) and one is used for the ISCSI service, where the virtual machines are loaded. The problem is,

Thanks to debugging information from Thomas Mieslinger, I have root-caused the failure of chain.c32 in Syslinux 3.85. I have put out Syslinux 3.86-pre1 and Syslinux 4.00-pre33 which fix the problem. I expect to release a Syslinux 3.86 relatively shortly (ideally in the next two weeks), with bug fixes only. I would like to figure out if there are other bug fixes we can get in in reasonable time,