similar to: extlinux-4.0 can't boot on our platform.

Hi all : my /dev/sda2 is ext3 format filesystem, the os moblin is installed in /dev/sda2 which is root partition, the bootloader is grub, now i want to change the bootloader to extlinux, but i came across some trouble, so i did some steps as following: 1. rpm -ivh syslinux-extlinux*.rpm 2. extlinux -i /boot/extlinux 3. i edit extlinux.conf , and put it in /boot/extlinux/, there is

Hi all : my /dev/sda2 is ext3 format filesystem, the os moblin is installed in /dev/sda2 which is root partition, the bootloader is grub, now i want to change the bootloader to extlinux, but i came across some trouble, so i did some steps as following: 1. rpm -ivh syslinux-extlinux*.rpm 2. extlinux -i /boot/extlinux 3. i edit extlinux.conf , and put it in /boot/extlinux/, there is

I am trying to boot a ramdisk on a usb stick in read-only mode using extlinux. When the system boots all I am getting is a blinking cursor. The stick booted with lilo, but I had some issues with lilo so I am trying extlinux. 1) I partitioned the stick as a linux partition, formated it ext2, and mounted /dev/sda1 on /mnt/flash. 2) I am running extlinux 3.86. 3) excuted "extlinux -i

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

Hi, I compiled a 3.0 kernel for my system, used the same config of my already working 2.6.39.1 kernel on the same system. But whenever extlinux tries to load my 3.0 kernel it crashes instantly and reboots, not even 1 kernel msg is displayed. So it seems like the kernel isn't loaded at all and crashes. Rgds, /reni

Hello, I use the extlinux bootloader, and I've recently discovered that the current version can no longer boot Windows. The message it flashes is "Requested partition not found!" After downgrading to the version 3.86, it was able boot correctly. Unfortunately, I do not know in which was the last version which was able to boot Windows (I rarely boot it), but I am pretty sure that

Hi, I got this from my digital camera with Syslinux compiled from source (yes, I've got a configuration file with a UI directive): SYSLINUX 4.02 pre-1-g0ee5047 CHS Copyright (C) 199... EDD: Error 0100 reading sector 0 EDD: Error 0100 reading sector 2252244088 EDD: Error 0100 reading sector 2252244089 EDD: Error 0100 reading sector 2252244090 EDD: Error 0100 reading sector 2252244091 EDD:

On Mon, Feb 9, 2015 at 11:58 AM, Ady via Syslinux <syslinux at zytor.com> wrote: > _ I doubt Syslinux can be successfully built in a "pure 64-bit" OS, but > I could be wrong. I have always seen some form of "multilib" or > "lib32-glibc" or similar as a dependency. If you succeed in building > Syslinux in a "pure 64-bit" OS, please let us

Hi I understand you (mostly). 0) How do i "install the MBR code as well and to activate your partition." 1) "mount /dev/sda1 /mnt" -->> successfully completed. 2) "mkdir /mnt/extlinux" -->> successfully completed. 3) "extlinux --install /mnt/extlinux" -->> does not work. Funny, but it it seems that there is no such thing as

I have LVM volumes: /dev/disk1/main /dev/disk1/mainboot /dev/disk1/other /dev/disk1/otherboot I can boot main by using syslinux with syslinux.cfg including: LABEL main MENU LABEL Main LINUX ../vmlinuz-linux APPEND root=UUID={UUID} {kernel parameters} INITRD ../initramfs-linux.img (1) I see a lot of places saying syslinux can't boot a kernel on another partition, and that you have

Thanks but I am still in the same spot : 1) I have created a partition (ext2 with GParted). 2) Now what ? I was thinking that I should install syslinux (the bootloader). All the examples say something like "syslinux --directory /boot/syslinux/ --install /dev/sdb1" but this does not make any seance, because the is no /boot on the system. I have tried it anyways, but the

Hi: I've been seeing intermittent build failures with the extlinux target, and I believe I've tracked it down to a VPATH issue. See this make -d log: Finished prerequisites of target file `extlinux'. Prerequisite `extlinux.o' is newer than target `extlinux'. Prerequisite `setadv.o' is newer than target `extlinux'. Prerequisite

When I try to boot my system using extlinux I get the error: EXTLINUX 3.51 2007-06-10 EBIOS Copyright (C) 1994-2007 H. Peter Anvin Could not find kernel image: linux boot: ???????????????????????????????? I've searched the archives and it would appear that extlinux can't find the extlinux.conf file.... Is there something glaring that I am missing? TIA - Phil I have a 32MB CF card

On Tue, Oct 20, 2015 at 1:08 PM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> Hello, >> >> We are experiencing a strange behaviour on an embedded system (i386 PC board). >> >> The structure of our disk is the following one : >> - A 2GB fat16 partition with DOS and syslinux >> - A 100GB Ext4 partition with Extlinux an several linux images

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

Hello syslinux, Merry Christmas! These patches will make extlinux work with umounted ext2/3/4 filesystem, for example: $ extlinux -i /dev/sdXN or $ extlinux -i file_block Also it can work with something like: $ extlinux /dev/sdXN --reset-adv or $ extlinux file_block --reset-adv We don't use a new option (I planed to use "-d" but it is already in use), it will check whether the

Hello, Is it possible to install extlinux into a disk image, without being root ? It seems like extlinux --install absolutely requires the specific block device in which extlinux should be installed to be mounted. This prevents from doing an extlinux installation as non-root, which is annoying for build systems such as Buildroot [1] that build a complete Linux system from source, without being

hello, quick question about extlinux: I accidentally installed extlinux on the wrong partition (I run extlinux -i somewhere beofre mounting my usb key to somewhere). Now extlinux seems to be stuck in my main hd partition... how do I remove extlinux from the hard drive? I mean both the extlinux.sys file and the bits in the partition table... Could not find any info how to doit. Thanks. Paolo

1. Which label is referred by -M, --menu-save=label Set the label to select as default on the next boot ? 2. With # grep 'label' /boot/extlinux/extlinux.conf label 1 menu label An old linux version 2.1 What will be the consequences of # extlinux -M 1 /boot/extlinux and # extlinux -M 'An old linux version' /boot/extlinux 2.2 What are

Hi, I'm trying to build extlinux statically, but no matter what CFLAGS or OPTFLAGS I set in the Makefiles I get bios/extlinux/extlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.24, BuildID[sha1]=ef970f59a48b226b2397b73a56e02a73b79c5f0a, not stripped I have tried adding OPTFLAGS= -static to the extlinux/Makefile as well as