similar to: EXTLINUX

Hi, I want use extlinux 3.07 to boot Thinstation from hard disk. o I have kernel, whos name is vmlinuz, and init RAM disk (initrd). My hard disk is... Disk /dev/hda: 65 MB, 65536000 bytes 8 heads, 32 sectors/track, 500 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 499 63856 83

Hello list, I'm trying to reuse a fairly old PC based embedded system. It has no video output at all, no VGA, nothing older, and no keyboard / mouse connectors. The console is on a standard RS232 interface, including BIOS output and the minimal BIOS loader. The BIOS emulates / redirects text output to and keyboard input from the console RS232 interface, but unfortunately, this emulation

Hello, First of all, thanks very much for this piece of software, it's working like a charm. I'm using it to boot a Linux distro I'm working on. What I want to deal with is the display of accented characters in ISOLINUX. First, I set EXTLINUX up to boot an ext2-formatted USB stick. No problem so far. I wrote a config file ordering to load a font (lat-9w) to display french

Hi folks! In my system i have a SSD card, and i try to install extlinux in it. But, my extlinux installation not work!! I make a initrd to boot my machine on lan, and my init execute a installation of extlinux version 3.86 on my SSD card. The installation on init is similar to: http://pastebin.com/szcYCCjR The return of installation of extlinux is: /mnt is /dev/sda1 And the install not report

On 12/24/2014 12:16 AM, Robert Yang wrote: > Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv >

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > On 12/24/2014 12:16 AM, Robert Yang wrote: >> Hello syslinux, >> >> Merry Christmas! These patches will make extlinux work with umounted >> ext2/3/4 filesystem, for example: >> >> $ extlinux -i /dev/sdXN >> or >> $ extlinux -i file_block >> >> Also it can work with something like:

Hi, there now i am booting pxelinux menu32 with 2 boot images 1. DOS boot image 2. Thinstaion pxelinux and my directory structure is like this (Pxelinux with menu32) /tftpdroot/pxelinux.0 /tftpdroot/pxelinux.cfg/default /tftpdroot/dos.imz (DOS bootimage) /tftpdroot/memdisk (memdisk package) (Thinstation Pxelinux) /tftpdrooot/pxe/pxelinux.0 /tftpdroot/pxe/initrd

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

Duncan, Do a quick check here on x86_64-apple-darwin10 with svn llvm and svn dragon-egg against release gcc 4.5.0, the results from the himenoBMTxpa benchmark compiled at -O3 look pretty good. With stock gcc-4.5.0, we get... Grid-size = M mimax = 128 mjmax = 128 mkmax = 256 imax = 127 jmax = 127 kmax =255 Start rehearsal measurement process. Measure the performance in 3 times. MFLOPS:

Hello syslinux, Merry Christmas! These patches will make extlinux work with umounted ext2/3/4 filesystem, for example: $ extlinux -i /dev/sdXN or $ extlinux -i file_block Also it can work with something like: $ extlinux /dev/sdXN --reset-adv or $ extlinux file_block --reset-adv We don't use a new option (I planed to use "-d" but it is already in use), it will check whether the

When I try to boot my system using extlinux I get the error: EXTLINUX 3.51 2007-06-10 EBIOS Copyright (C) 1994-2007 H. Peter Anvin Could not find kernel image: linux boot: ???????????????????????????????? I've searched the archives and it would appear that extlinux can't find the extlinux.conf file.... Is there something glaring that I am missing? TIA - Phil I have a 32MB CF card

Hi, I'm trying to build extlinux statically, but no matter what CFLAGS or OPTFLAGS I set in the Makefiles I get bios/extlinux/extlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.24, BuildID[sha1]=ef970f59a48b226b2397b73a56e02a73b79c5f0a, not stripped I have tried adding OPTFLAGS= -static to the extlinux/Makefile as well as

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

Hi Folks, OK - I'm not entirely new to Linux but I'm certainly not great on the boot process. What I'm trying to achieve is to boot from an external USB HDD (not flash drive) using EXTLINUX. I've run an installation against the disk using a VM. The disk was partitioned as follows: /dev/sda1 = /boot (bootable) /dev/sda2 =/swap /dev/sda3=/ (i.e. root) /dev/sda4=/dos sda1 and 3

Hello, I use the extlinux bootloader, and I've recently discovered that the current version can no longer boot Windows. The message it flashes is "Requested partition not found!" After downgrading to the version 3.86, it was able boot correctly. Unfortunately, I do not know in which was the last version which was able to boot Windows (I rarely boot it), but I am pretty sure that

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

On Tue, Oct 20, 2015 at 1:08 PM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> Hello, >> >> We are experiencing a strange behaviour on an embedded system (i386 PC board). >> >> The structure of our disk is the following one : >> - A 2GB fat16 partition with DOS and syslinux >> - A 100GB Ext4 partition with Extlinux an several linux images

Hi all, Can I safely assume that each migration is excuted within a transaction, so that''s it''s safe to have migrations executing failing statements? Thanks, - Rowan -- Morality is usually taught by the immoral.

hello, quick question about extlinux: I accidentally installed extlinux on the wrong partition (I run extlinux -i somewhere beofre mounting my usb key to somewhere). Now extlinux seems to be stuck in my main hd partition... how do I remove extlinux from the hard drive? I mean both the extlinux.sys file and the bits in the partition table... Could not find any info how to doit. Thanks. Paolo